Download

Your signal processing demands extreme attention
With us your signal is in safe hands
Let's connect.
Analogue signal conditioning
Electronics lie at the heart of your automation technology
We give you solutions with intelligence
The job of electronics in automation is to transmit, convert, protect and
supply. We put together practical solutions for these functions – for
maximum safety and efficiency in machine construction, materials
handling, energy generation and process technology.
2
Remote-I/O
Power supply
Industrial Ethernet
Relay modules and solid-state relays
Analogue signal conditioning
Surge protection
Measuring and monitoring systems
PLC interface units
Analogue signal conversion plays a crucial role in your
automation system
Here you will find our wide range of products
4
5
6
8
10
14
16
18
24
26
28
30
34
Your application – our products
We are your partner for analogue signal conversion
Overview of our product groups
Communication-enabled signal converters
ACT20C
ACT20C in use
Order summary and technical data
Intrinsically safe signal converters
ACT20X
ACT20X in use
Order summary and technical data
Functional safety
SIL
36
38
42
44
47
48
50
6 mm wide signal converter
ACT20M
ACT20M in use
Order summary and technical data
Smallest signal converter
MCZ
Order summary and technical data
FDT-Software
WI-Manager
FDT/DTM in use
52
Selection table for all signal converters
54
How to find us
Multifaceted signal converter
ACT20P
ACT20P in use
Order summary and technical data
3
At home in your industries
We create the best signal processing
In machine engineering, the process industry and energy
technology – we provide reliable and safe signal transmission for your applications. Conveyer systems, water
treatment or power generation – no matter what the
application, none can manage today without electronics
and electrical connectivity. And in this internationalised,
technologically changing world, the complexity of requirements is rapidly increasing due to the emergence of new
markets. Analogue signal converters are therefore used
wherever parameters such as temperature, pressure, filling
level, flow rate, weight or speed need to be measured and
monitored as part of a continuous production process.
The reliable transmission of analogue signals and
data are key to meeting these challenges. Top quality
electronic devices ensure that temperature fluctuations,
electromagnetic interference, vibration, corrosion and
potentially explosive atmospheres do not affect the safety
and accuracy of signal transmission and conversion.
Machine engineering
The food processing and packaging industry is a particular
area in which an unbroken cold chain is one of the things
that needs to be guaranteed. Our ACT20P signal converters
process and transmit analogue data with an accuracy of up
to 0.05 %. Or perhaps the smallest installation space is the
selection criterion that interests you the most? Our ACT20M
signal converters fit up to 2 channels on a space just 6mm
wide, while our MCZ product is the smallest signal converter
on the market with a height of just 52 mm.
Process industry
Operational readiness in process plants is one of the
main challenges for the industry. In addition to the usual
conversion and isolation of signals, our communicationenabled ACT20C signal converters provide direct connection
to condition monitoring systems.
Functional safety is standard in most areas of application in
the process industry. Our intrinsically safe ACT20X signal
converters with FDT/DTM support will allow you to expand
integrated safety systems up to SIL level 3.
Power
Reliable and precise isolation of the automation system
from high power supplies is a major challenge in all areas of
energy technology. Our signal converters from the ACT20P
and ACT20M product ranges meet this challenge with flying
colours and also provide numerous additional and useful
features such as signal doubling or limit value definition.
Continuous monitoring of equipment and plant functions is
also possible with the signal converters from the ACT20C
series.
4
You are looking for a competent partner for analogue
signal conditioning
Take a look at what we can deliver
What are your requirements for analogue signal
conditioning
Hazardous industries require highly accurate readings in
their applications. This includes oil and gas producers,
chemical industries, water works, waste disposals steel
and power plants. To ensure a continuous production
process, measurements such as temperature, pressure,
level, flow, weight or speed need to be reliably detected
and parameterised. To guarantee maximum preciseness,
even over long distances, external influences that could
be harmful to signal transmission have to be reduced to a
minimum. This means that parameters and measurements
are error free as they traverse the process chain.
Functions of our analogue signal conditioner
•• Galvanic separation of measuring and control signals
•• Converting sensor signals into standardised output
signals (e.g. 0 ... 10 V or 4 ... 20 mA)
•• Protecting the sensitive interface technology in the
field of DCS systems
Why Weidmüller is the right partner for analogue
signal conditioning
We have an extensive range of analogue signal conditioner,
which cover a huge number of application requirements. We
are also constantly improving and expanding our portfolio.
We have many years of experience in the field of safe and
reliable signal transfer for hazardous or electromagnetically
exposed environments. Our FDT/DTM smart software tools
for product configuration facilitate the use of Weidmüller
signal conditioner. Our Online Product Assistant will help
you to make the best product selection. We support you with
global consulting and services. We offer a whole range of
Industrial Connectivity solutions in addition to our analogue
signal conditioner.
5
You have individual requirements
We have a diverse product range
With our products your signal is in safe hands
Whatever your requirements, our analogue signal converters in the ACT20-series
will provide reliable and accurate signal conversion and isolation. The series also
offers special features, such as communications support, a slim or flat design and
software configurability. With all these benefits your analogue signal is in safe
hands with us.
ACT20C: The Connective
ACT20X: The Intrinsically Safe
ACT20P: The Multifaceted
•• FDT/DTM-software via Ethernet to
configure locally or remotely
•• Communication-capable interface
can be used for condition
monitoringand diagnostics
•• Station building with "Plug &
Produce"-function
•• Wide range of functions for
separating and conditioning
intrinsically safe signals
•• Meets strict standards for the
process industry (Ex - zones 0,
1, 2 and 20, 21, 22) with SIL
capability
•• Easy configuration using
FDT/DTM-software
•• Precise and unique signal transducer
•• Easy configuration with display (Pro
DCDC II), FDT/DTM-software and
DIP switches
•• Release lever with coding to
simplify maintenance
•• More space in the cabinet by
12.5 mm width, with two channels
Machinery
Energy
Process
Transportation
6
G
G
G
ACT20M: The Slimmest
MCZ: The Smallest
Process-value display
•• Space saving at 6 mm width
•• Easy and quick installation
of the power supply via CH20M
DIN rail bus
•• Easy configuration via DIP switches
or FDT/DTM-software
•• Extensive approvals ie. ATEX,
IECEX, GL, DNV
•• Robust against interference
•• The smallest terminal block sized
analogue signal conditioner on
the market
•• Space-savings in the control cabinet
thanks to its narrow width of 6 mm
•• Easy wiring with pluggable cross
connectors
•• Large four-digit LED display
•• 1/8” DIN-standard front panel with
IP 65 protection
•• Integrated signal converter and limit
switch
G
SIL
61508
7
ACT20C
Take a preventative approach to monitoring plants and processes
ACT20C-gateway conveys precise status information on your devices
Diagnostic and status information that’s as comprehensive
as possible and comes from all areas of an automation
solution goes a long way in helping to optimise process
control.
With the ACT20C-gateway and the communication-capable
signal converters, for the first time ever we can obtain
process data from the signal conversion level – regardless
of the automation solution selected. An Ethernet interface
enables simple access to the desired information. The data
obtained in the ACT20C-gateway is provided via Modbus
TCP, or can be displayed directly in an FDT-frame application.
The flexibility of the ACT20C-gateway makes it easy for
you to optimise your processes. Depending on the
communication infrastructure, you can make this data
available throughout your entire network or pass it on to
your SCADA or maintenance system. The data can even
be used from any location over the Internet via an Industrial
Ethernet router.
Your
special
advantages:
8
Extensive diagnostics concept
Support of fast and exact cause analysis
according to NE107, NE43 and NE44.
More transparency in your process automation
For the first time ever, extensive diagnostic and status information
(which you can call up via the Ethernet interface) is available to you
at status conversion level.
ACT20C
Simple commissioning, fast maintenance
The station concept with “Plug & Produce”
and “Hot Swapping” makes installation and
maintenance work faster and thus more
efficient.
All the process parameters at a glance
The status of devices, environmental conditions
and functions is continually monitored over the
Ethernet.
Clever software configuration
The software configuration based on the FDT
and FDT2 standards makes parameterisation,
documentation and data backup easier.
9
ACT20C
Detailed analysis and presentation of core process parameters
The ACT20C supplies key parameters and historical data,
independent of the location
Many process parameters in your system are handled by your
control system, which shows you the current status of your
process. Even so, do you have a full overview of critical
system states? And this at all times, at every location, and
with the recent system history?
With the ACT20C, you receive accurate information on the
status of the sensors, signal processing and cabling. Data
can be called up and will depending on your individual
communications infrastructure. This comprehensive overview
allows you to accurately analyse errors and faults, and initiate
targeted actions taken by system operators and maintenance
personnel. By doing so, this technology contributes to
ensuring reliable system operation.
10
ACT20C
Thanks to the ACT20C, Weidmüller is now the first to offer
a solution which supplies you with extensive diagnostic
and status information without the need to deal with the
complexity of field bus systems.
the front panel or via the Ethernet, and performance is
ensured through the manufacturer-independent FDT/DTM
software platform. To work with this platform, Weidmüller
provides the WI-Manager universal FDT frame application.
The isolating converters are based on the proven, robust
technology of transferring analogue signals to the DCS
system. Various signal sources and field devices can be
connected to the input side of the isolating converters.
As a result of this, the ACT20C can be configured for the
user-defined processing of current, voltage and transmitter
signals. Access is accomplished via a service interface on
Data collected in the ACT20C is made available over
the Ethernet via Modbus TCP. Depending on the
communications infrastructure, you can make this data
available to your SCADA system within your network, and
you can also access it via the Internet from any location
using an industrial Ethernet router.
Let’s connect.
Visit the life application of the
ACT20C by using
http://act20c-weidmueller.com
or scan this QR code.
11
ACT20C
Be purposeful when monitoring and optimising plants and processes
ACT20C station with current measuring transducers for due transparency
If you are to operate your plants as efficiently as possible, then you constantly
need information about the current status of devices and functions. In wind power
installations, for example, this includes the effective current consumption of
connected loads (such as motors for pitch adjustment, device heaters or brakes),
as well as information concerning their utilisation and operating behaviour.
12
Condition Monitoring
Preventative maintenance strategies using automationindependent information about operating conditions and
process data for connected devices.
Smart software configuration
The software configuration based on the FDT and FDT2
standards makes parameterisation, documentation and
data backup easier.
Multiple limit value monitoring
The main alarm and auxiliary alarm permit precise
identification of all alarm situations.
High process reliability
A galvanic four-way isolation and an impulse withstand
voltage of 6.4 kV pursuant to IEC 61010-2-201 guarantee
optimum fusing.
ACT20C
Using the real-value effective procedure, ACT20C current
measuring transducers record a connected load’s real
current consumption for both DC and AC currents – even
when the waveform is distorted. Information about the
connected loads’ operating behaviour is also determined
during this process.
The data transmitted by the ACT20C current measuring
transducers enables you to continuously monitor connected
units in terms of whether levels are exceeding or falling
below defined load points, as well as allowing you to
maintain an overview of the units’ use and service life.
This makes it far easier to purposefully optimise plants
and processes.
More transparency in your automation
Identify errors and analyse faults in detail. ACT20C
current measuring transducers allow for precise current
measurements and supply extensive status information
over the Ethernet.
13
ACT20C
ACT20C-GTW-100-MTCP-S
ACT20C-CMT
Gateway for ACT20C-station
Communicative current-measuring transducer
Technical data
Technical data
• Measurement and monitoring of AC/DC-currents
• Input and output ranges are adjustable
• Contact-free through-hole technology
• Relay output for limit value alarm with switching
threshold, delay, hysteresis
• Monitoring/configuration via ACT20C-station/gateway
• Access to all data from the devices connected to
an ACT20C-station
• RJ45 port with Ethernet TCP/IP
• Configuration using the standard FDT/DTM
• Station management with “Plug & Produce” and “Hot Swapping”
Input (communication)
Communication interface
CH20M DIN rail bus
Data
Status information, diagnosis and process data of ACT20C-CMT current measuring transducers
Configuration
FDT/DTM-software, DHCP
Output (communication)
Communication interface
Ethernet, CBX200 USB
Ethernet
1x RJ45, 10/100 MBit/s, Modbus TCP, DHCP
Input
Measuring method
Hall sensor via throughole technology,
diameter 10,5 mm
Input current
0..5/10 A or 0../40/50/60 A, AC (RMS) or DC (AC: 15..700 Hz)
Configuration
FDT/DTM-software, DHCP
Output (analog)
Output voltage
0...5 V, 0...10 V, -5…+5 V, -10...+10 V, configurable
Output current
0...20 mA, 4...20 mA, -20…+20 mA, configurable
Output (digital)
Typ
Relay, change-over contact with open-circuit or closed-circuit principle
Switching voltage AC, max.
250 V AC/24 V DC/6 A
Signal conditioning
Transfer function
Linear
Limit monitoring
Process alarms (4-times) with configurable delay (0..180s) and hysteresis
Condition Monitoring
Process value: sensor, output;
Operating hours of connected load and device, Number of starts; Number of deviations from rated operation
of the load (pre-alarms for overcurrent, under current), number of limit violations (main alarms for overcurrent,
under current)
Diagnosis
Device status according to NE107, Overrange detection according to NE43/NE44, Max./min. value for
overcurrent resp. under current
Input signal
Communication signal
Output signals
Current
Ethernet / Modbus TCP
Current, voltage
44
Ethernet
Output
Power supply
Supply
64
63
Output
43
+18...31.2 V DC
+
I for AC
GND
42
Input
DIN Rail Bus CH20M
Communication H
V
62
I for DC
85 84 83 82 81
Communication L
+
-
-
41
61
Supply GND
mA
Output signal
Supply +24 V DC
Relay
Ordering data
Type
ACT20C-GTW-100-MTCP-S
ACT20C-LBT-10 (load resistor)
Note: Accessories on page 46/47 (CH20M DIN rail bus)
Qty.
1
1
Order No.
1510370000
1510340000
Ordering data
24
Output
21
DIN Rail Bus CH20M
14
Output
23
Type
ACT20C-CMT-10-AO-RC-S
ACT20C-CMT-60-AO-RC-S 22
Input
CO
Note: Accessories on page 46/47 (CH20M DIN rail bus)
85 84 83 82 81
Communication L
Communication H
Supply GND
Supply +24 V DC
Qty.
1
1
Order No.
1510240000
1510420000
ACT20C
ACT20C-AI-AO-MTCP-S
Network-capable signal converter for
DC voltage and current signals
• Scalable current or voltage input
• Current or voltage output
• Parameterisable limit-value monitoring
• Diagnostics on device status, signals and line
faults via Modbus
• PC-configuration with FDT/DTM-software
Gerätekonfiguration für analoge Signalwandler
Mit FDT- und FDT2 Technologie
Let’s connect.
Technical data
Input
Input voltage
0/2 .. 10V DC, configurable
Input current
0/4 .. 20 mA
Softwareunterstützte Bearbeitung und Konfiguration von Geräten in Ihrer Anlage vereinfachen die Inbetriebnahme und
Configuration
FDT/DTM-software, DHCP Wartung. Für unsere PC-konfigurierbaren ACT20-Signalwandler bieten wir eine vollständige Lösung mittels FDT-Techno
an. Unser WI-Manager ist eine FDT- und FDT2 Rahmenapplikation und unterstützt somit alle Gerätetreiber (Device Type
Output (analog)
Output voltage
Manager = DTM) unserer PC-konfigurierbaren Produkte. Unsere DTM-Treiber bieten Ihnen über grafische Oberflächen d
0..10 V
Bedienen und Beobachten von Geräten sowie deren einfache Konfiguration an.
Output current
0/4..20 mA
1 Integrierte Sicherheit
Output (communication)
Communication interface
Durch die Benutzerverwaltung des WI-Managers
Ethernet, CBX200 USB
kann der Zugriff auf unkritische Gerätefunktionen
Ethernet
beschränkt werden. Hierdurch erhöht sich die
1x RJ45, 10/100 MBit/s, Modbus TCP, DHCP
Signal conditioning
Sicherheit der Anlage.
Transfer function
Linear, inverse
2 Zentrale Datenverwaltung
Limit monitoring
Die zentrale Verwaltung aller verfügbaren Projekt- u
Process alarms with configurable delay and hysteresis
Condition Monitoring
Produktdaten, in einem einheitlichen Datenformat,
Process value: sensor, output
senkt die Kosten für Software-Management und
Diagnosis
Device status according to NE107, cable break (input/output), short circuit (input/output), overload (sensor/
output) according to NE43/NE44
U
I
–
V
I
+
mA
RJ45
11
–
12
+
–
Tx +
13
14
U
ETH
I, U
I, U
PS
63
–
64
+
51
–
52
+
Datenadministration.
3 Volle FDT Funktionalität
Der WI-Manager unterstützt in vollem Umfang die
Funktionen von FDT und FDT2 und ist dadurch
zukunftssicher und abwärtskompatibel.
4 Universelle Netzwerk-Topologie
Unterschiedlichste Kommunikationsprotokolle
werden durch entsprechende DTMs im WI-Manage
unterstützt.
I
–
+
53
54
24 V DC
Ordering data
Type
ACT20C-AI-AO-MTCP-S
Bezeichnung
CBX200 USB
Hier können Sie unsere
Qty. Order No.
FDT/DTM-Software downloaden:
1
1334490000
http://www.weidmueller.de/FDT-DTM
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
32758 Detmold, Germany
Telefon +49 5231 14-0
Let’s connect.
Funktion
KonfigurationsYou can download our
adapter
FDT/DTM
software here:
WI-Manager
FDT Rahmenanwendung
www.weidmueller.com/fdt-dtm
Gerätetreiber
orWeidmüller
scan DTM-Library
the QR code.
(DTMs)
Typ
Adapter
Software
8978
Down
Software
Down
15
ACT20X
Secure isolation of signals from hazardous areas
Intrinsically safe ACT20X Ex-signal converters
Your application requires signals to be routed to or from
hazardous areas. Our intrinsically safe ACT20X signal
isolating convertors meet the strict standards of the process
industry and process signals from a wide range of Ex-zones
(Zones 0, 1, 2) for control purposes.
Alarm function
No laborious troubleshooting. Alarm function
integrated for cable or sensor errors. In case of
failures, a diagnostic signal is sent to the control
system.
ACT20X can be used universally. On the input side, the
converter can process HART® input signals, or DC, RTD,
thermocouple or NAMUR signals from the Ex-zone. On the
output side, the ACT20X controls field devices with analogue
or digital signals. All ACT20X products are characterised by
high insulation, high accuracy and high temperature stability.
The 2-channel versions with width of 22.5 mm are available
with either transistor or relay output. Because of this
highly integrated design, the ACT20X helps you to reduce
installation costs and use less space.
Intrinsically safe signal converters with SIL approval are
available for safety functions, e.g. switching aggregates
on/off, monitoring actuators or temperature/pressure.
Our ACT20X complies with these stringent standards of the
process industry, as well as mining industry requirements.
Your
special
advantages:
16
Configuration via FDT
All modules can be quickly and conveniently
configured with manufacturer-independent FDT/
DTM software.
ACT20X-HUI-SAO-LP with loop-powered output
A universal signal conditioner with a loop-powered output and
a width of only 12.5 mm is now joining the ACT20X product
family. Like all products in this line, the ACT20X-HUI-SAO-LP
can be configured on the PC with FDT/DTM-software. The input
can process mA, mV DC, 2/3-wire RTD, thermocouple,
resistence and potentiometer signals from hazardous areas.
ACT20X
Intelligent connection system
Pluggable, coded, with release lever. The release
lever simplifies maintenance and allows the
disconnection without damaging the cables.
transparent
A variety of functions
The ACT20X family includes digital and
analogue signal conditioners for intrinsically
safe circuits: pulse separators, signal isolators,
thermal and mA conditioners, digital and
proportional actuator drivers as well as universal
signal conditioners.
Worldwide application
Fulfils the strict standards and requirements of
the process industry. Can be used worldwide
due to international approvals ATEX, IECEX, FM,
GOST and ship approval.
SIL
61508
+60 ℃
-20 ℃
17
ACT20X
Your control electronics are very sensitive in hazardous areas
We protect them around the clock
You use intrinsically safe circuits in hazardous areas to limit power. For such
purposes, you need intrinsically safe signal converters with electrical isolation and
reliable components with lightning and surge protection to protect your sensitive
sensors and prevent system failure.
We offer a complete packet of solutions for signal processing
between your measuring instruments in the field and the I/O
modules in the cabinet with perfectly compatible components;
it consists of the slim, analogue ACT20X signal converter and
the VARITECTOR SPC EX or VARITECTOR SSC EX surge
protection module.
The universal ACT20X signal converter with electrical isolation
features an intrinsically safe input for HART® signals, DC, RTD,
and thermal element or NAMUR signals from hazardous areas,
and isolates them from safe areas. The electrical power in this
12.5 mm slim module is isolated from the input and output.
18
Approvals such as ATEX, IECEx, cULus Ex, FM, EAC and DNV
ensure that it can be used around the globe.
The VARITECTOR SPC EX and SSC EX (slim variant)
modules offer the option of safely discharge power surges
in the hazardous zones (1 or 2). The pluggable arresters in
the VARITECTOR SPC EX meet the tough requirements
for intrinsic safety in hazardous areas in accordance with
the current EN 60079 standard. They comply with the
IEC 61643-21 product standards and are tested for protection
classes D1, C2 and C1.
ACT20X
ACT20X
VARITECTOR SPC/SSC EX
•• Simple configuration and operation through use of
FDT/DTM software
•• World-wide use thanks to international approvals
•• Integrated alarm contact for cable and sensor errors
•• Surge protection for digital and analogue, intrinsically
safe signals due to negligible Li and Ci values
•• For installation in EX-zones 2 and 1
•• Can be used in dust and gas atmospheres
19
ACT20X
Current-supply isolator, HART® Transparent
The ACT20X-HAI-SAO current supply isolator is a HART®-protocol transparent signal isolator for analogue
input signals from Ex zone 0. It provides an analogue signal for the safe zone on the output side. It is available
in a single-channel or double-channel version.
EX area Zone 0, 1, 2, 20, 21, 22
Safe area Zone 2 / FM Class 1, Division 2
Input Signals
Output Signals
Analogue, 4...20 mA
+
44
14
42
Channel 1:
-
+
2-wire supply –
4...20 mA
mA
+
mA
Tx
43
13
41
–
42
12
44
+
41
11
43
–
Current
-
–
2-wire supply +
2-wire supply –
4...20 mA
mA
active or passive sensor
mA
–
2-wire supply +
active or passive output
Power Supply and
Module Status
+
24
51
-
23
52
22
53
21
54
Channel 2:
Tx
+
Current
-
active or passive sensor
Gnd. Supply +19,2...31,2 V DC
Module status
N.C.
Module status
Application example:
Measuring temperature with a head transmitter, signal transmission with HART®
Order data
Type
1-channel version
ACT20X-HAI-SAO-S
2-channel version
ACT20X-2HAI-2SAO-S
CBX200 USB-interface-adapter - 8978580000
20
Qty.
Order No.
1 pc.
8965430000
1 pc.
8965440000
ACT20X
Current output isolator, HART® Transparent
The ACT20X-SAI-HAO current output isolator is HART®-transparent. The input is connected to the safe area
controller or PLC, and the output is connected to an analog actuator in a hazardous area, e.g. Zone 0. It is
available in a single-channel or double-channel version.
EX area Zone 0, 1, 2, 20, 21, 22
Safe area Zone 2 / FM Class 1, Division 2
Ex Output signals
Input signals
41
42
12
44
-
41
11
43
+
passive valve
Ch1
43
13
Ch 2
42
-
Load
4...20 mA
44
14
+
Channel 1:
Analogue, 4...20 mA
active input
Channel 2:
Power Supply and
Module Status
Load
4...20 mA
24
51
23
52
22
53
21
54
passive valve
Gnd. Supply +19,2...31,2 V DC
Module status
N.C.
Module status
Application example: controlling an actuator in the Ex zone
Order data
Type
1-channel version
ACT20X-SAI-HAO-S
2-channel version
ACT20X-2SAI-2HAO-S
Qty.
Order No.
1 pc.
8965450000
1 pc.
8965460000
CBX200 USB-interface-adapter - 8978580000
21
ACT20X
NAMUR isolating switching amplifier: with relay output
The ACT20X-HDI-SDO-RNO (NC) isolating switching amplifier is a specialised signal isolating converter
for Namur sensor signals or for volt-free contacts from a Zone 0 hazardous area. A single relay, available
optionally as NC or NO, provides the output signal in the safe zone. Single-channel or double-channel
versions are also available.
EX area Zone 0, 1, 2, 20, 21, 22
Safe area Zone 2 / FM Class 1, Division 2
Input signals
NAMUR
Mechanical
switch
Channel 1:
+
–
Output signals
Rs
Rp
Rp
44
14
44
43
13
43
42
12
42
41
11
41
Relay
Channel 2:
N.O. or N.C.
Relay
Relay
Channel 1:
N.O. or N.C.
Relay
Power supply
NAMUR
Mechanical
switch
Channel 2:
+
–
Rs
Rp
Rp
24
51
23
52
22
53
21
54
Gnd. –
Supply +19,2...31,2 V DC
Module status
N.C.
Module status
Application: monitoring of fill level with the ACT20X HDI-SDO-RNO (relay output)
Order data
Type
1-channel version, normal-open
ACT20X-HDI-SDO-RNO-S
1-channel version, normal-close
ACT20X-HDI-SDO-RNC-S
2-channel version, normal-open
ACT20X-2HDI-2SDO-RNO-S
2-channel version, normal-close
ACT20X-2HDI-2SDO-RNC-S
CBX200 USB-interface converter - 8978580000
22
Qty.
Order No.
1 pc.
8965340000
1 pc.
8965350000
1 pc.
8965370000
1 pc.
8965380000
ACT20X
Valve control component for gas group IIC, 35 mA
The ACT20X-SDI-HAO-S solenoid/actuator driver takes a switched input from e.g. a safe area controller and
delivers an corresponding output to operate an actuator in a hazardous area, e.g. Zone 0. It is available in a
single-channel or double-channel version.
EX area Zone 0, 1, 2, 20, 21, 22
Save area Zone 2 /FM Kl. 1 Abt. 2
Ex-Output Signals
Solenoid
Channel 1:
Alarm
Input signals
44
14
42
43
13
41
42
12
44
41
11
43
+V
+V
+V
+V
Power Supply
Channel 2:
Alarm
Solenoid
24
51
23
52
22
53
21
54
Gnd –
Supply +19,2...31,2 V DC
Module status
N.C.
Module status
Application: Inflow control in Ex zone with gas group IIC
Order data
Type
1-channel version
ACT20X-SDI-HDO-L-S
2-channel version
ACT20X-2SDI-2HDO-S
Qty.
Order No.
1 pc.
8965400000
1 pc.
8965420000
CBX200 USB-interface-adapter - 8978580000
23
ACT20X
Universal measurement and signal isolator-converter
The ACT20X-HUI-SAO-S is a universal input signal isolator/converter. This model processes temperature
signals from PT100 sensors and thermocouples as well as DC voltage and current signals (mA) from the
hazardous area. On the output side, an isolated milliamp signal is passed to the receiver or controller in the
safe area. This model also has a relay output which can be used for a process alarm or trip.
EX area Zone 0, 1, 2, 20, 21, 22
Save area Zone 2 /FM Kl. 1 Abt. 2
Output signals
Potentiometer
RTD and lin.R
connection
cables
Input signals
TC
Analogue, 0/4...20 mA and relay
44
14
42
2-wire supply 4...20 mA
+
Channel 1:
mA
43
13
41
42
12
44
41
11
43
mA
–
–
2-wire supply +
Relay
N.O.
passive sensor passive sensor
active sensor
Relay
active or passive output
Supply and module status
Channel 2:
Current
active/passive sensor
Voltage
+
Tx
–
+
+
24
51
23
52
22
53
21
54
Mass –
Supply +19,2...31,2 V DC
Module status
N.C.
Module status
active sensor
Application example: temperature measurements in the Ex zone
Order data
Type
1-channel version
ACT20X-HUI-SAO-S
CBX200 USB-interface converter - 8978580000
24
Qty.
Order No.
1 pc.
8965490000
ACT20X
Temperature transducer
The ACT20X-HTI-SAO temperature transducer processes temperature signals from PT100 sensors and
thermocouples originating in the Ex zone. A current signal (mA) can also be connected as the input signal. The
input is part of an intrinsically safe circuit (Zone 0). The isolated milliamp analogue output is the input to the
receiver or controller in the safe area. It is available in a single-channel or double-channel version.
EX area Zone 0, 1, 2, 20, 21, 22
Save area Zone 2 /FM Kl. 1 Abt. 2
Input signals
Current
RTD
Connection,
wires
Output signals
Analogue, 0/4...20 mA
TC
44
14
42
+
Channel 1:
mA
+
–
43
13
41
42
12
44
+
43
–
mA
41
11
active sensor
Channel 2:
Current
passive sensor
RTD
Connection,
wires
+
active sensor
passive sensor
passive sensor
2-wire supply –
4...20 mA
mA
–
2-wire supply +
2-wire supply –
4...20 mA
mA
–
Channel 1
Channel 2
2-wire supply +
active or passive output
Supply and module status
TC
24
51
23
52
22
53
21
54
Supply –
Supply +19,2...31,2 V DC
Module status
N.C.
Module status
passive sensor
Application example: temperature measurements in the Ex zone
Order data
Type
1-channel version
ACT20X-HTI-SAO-S
2-channel version
ACT20X-2HTI-2SAO-S
Qty.
Order No.
1 pc.
8965470000
1 pc.
8965480000
CBX200 USB-interface converter - 8978580000
25
ACT20X
The choice is yours
Product selection and accessories for your application
Your application needs to conduct a variety of intrinsically safe signals to and from
hazardous areas. The selection table makes it easy to choose products by giving
you an initial overview of the full range of our products.
8965340000
8965350000
8965370000
8965380000
8965360000
8965390000
8965400000
8965420000
8965410000
8965470000
8965480000
8965490000
1318220000
8965430000
8965440000
8965450000
8965460000
ACT20X-HDI-SDO-RNO-S
ACT20X-HDI-SDO-RNC-S
ACT20X-2HDI-2SDO-RNO-S
ACT20X-2HDI-2SDO-RNC-S
ACT20X-HDI-SDO-S
ACT20X-2HDI-2SDO-S
ACT20X-SDI-HDO-L-S
ACT20X-2SDI-2HDO-S
ACT20X-SDI-HDO-H-S
ACT20X-HTI-SAO-S
ACT20X-2HTI-2SAO-S
ACT20X-HUI-SAO-S
ACT20X-HUI-SAO-LP-S
ACT20X-HAI-SAO-S
ACT20X-2HAI-2SAO-S
ACT20X-SAI-HAO-S
ACT20X-2SAI-2HAO-S
1
1
2
2
1
2
1
2
1
1
2
1
1
1
2
1
2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Namur initiator
Namur initiator
Namur initiator
Namur initiator
Namur initiator
Namur initiator
NPN PNP switching
NPN PNP switching
NPN PNP switching
Universal
Universal
HART®- transparent
HART®- transparent
HART®- transparent
HART®- transparent
X
X
X
X
X
X
1
1
2
2
1
2
1
2
1
1
2
1
1
1
2
1
2
Relay
Status relay
Miscellaneous
0...10 V
0...20 mA
Channel
Frequency
RTD
TC
0…5 V
0...10 V
4...20 mA
0...20 mA
X
X
X
X
X
X
X
X
X
X
Output
Miscellaneous
4...20 mA
Input
Product
Channel
Order code
Loop powered
Selection chart
X
X
X
X
Transistoroutput
Transistoroutput
Ignition protection group IIC
Ignition protection group IIB
X
X
X
X
X
X
X
X
X
X
X
Limit switch
Output-loop-powered
HART®- transparent
HART®- transparent
HART®- transparent
HART®- transparent
Cold junction compensation terminal (for optional use with ACT20X temperature modules)
1-channel
black
2-channel
black
Let’s connect.
26
Release lever colour
blue
Printing
11/12/13/14
Print colour
white
1160640000
blue
11/12/13/14
white
1160650000
Use our product assistant to select the
right product for your application:
www.wmqr.eu/pasc1
or scan the QR code.
Let’s connect.
If you require the package insert for
ACT20X products, please consult our
online catalogue:
http://catalog.weidmueller.com
or scan the QR code.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
ACT20X
Gerätekonfiguration für analoge Signalwandler
Mit FDT- und FDT2 Technologie
Let’s connect.
Softwareunterstützte Bearbeitung und Konfiguration von Geräten in Ihrer Anlage vereinfachen die Inbetriebnahme und
Wartung. Für unsere PC-konfigurierbaren ACT20-Signalwandler bieten wir eine vollständige Lösung mittels FDT-Techno
an. Unser WI-Manager ist eine FDT- und FDT2 Rahmenapplikation und unterstützt somit alle Gerätetreiber (Device Type
USB
Manager = DTM) unserer CBX200
PC-konfigurierbaren
Produkte. Unsere DTM-Treiber bieten Ihnen über grafische Oberflächen d
• Interface converter for configuration,
Bedienen und Beobachten von Geräten sowie deren einfache Konfiguration an.
with galvanic isolation
• USB port for connecting to PC
• TX and RX status displays
1 Integrierte Sicherheit
Durch die Benutzerverwaltung des WI-Managers
kann der Zugriff auf unkritische Gerätefunktionen
beschränkt werden. Hierdurch erhöht sich die
Sicherheit der Anlage.
2 Zentrale Datenverwaltung
Die zentrale Verwaltung aller verfügbaren Projekt- u
Produktdaten, in einem einheitlichen Datenformat,
senkt die Kosten für Software-Management und
Datenadministration.
Technical data
Input
Type
Input current
Input resistance
Input voltage
Output
Type
Output voltage
Output current
Level on interfaces
Baud rate
Activation signal
Insulation coordination
Insulation voltage
USB 2.0 (USB type A connector)
≤ 100 mA
22 kΩ
1.6…5.6 V
3 Volle FDT Funktionalität
Der WI-Manager unterstützt in vollem Umfang die
Funktionen von FDT und FDT2 und ist dadurch
zukunftssicher und abwärtskompatibel.
RS232 (4 pole 2.5 mm stereo jack)
3.3 V regulated
3A
1.8…5.6 V (automatically adapted)
≤ 115 kBd
9…15 V typ. 12 V/4 mA
4 Universelle Netzwerk-Topologie
Type
Qty.
Order No.
Unterschiedlichste
Kommunikationsprotokolle
CBX200 USB
1 pc.
8978580000
werden durch entsprechende DTMs im WI-Manage
unterstützt.
2.5 kV (input/output)
Bezeichnung
Let’s connect.
If you require IECEx-/ATEX-approvals,
Hier
können
please
visit: Sie unsere
FDT/DTM-Software
downloaden:
www.wmqr.eu/iazen1
http://www.weidmueller.de/FDT-DTM
or scan the QR code.
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
32758 Detmold, Germany
Telefon +49 5231 14-0
Telefax +49 5231 14-2083
[email protected]
www.weidmueller.com
CBX200 USB
Let’s connect.
Funktion
Typ
KonfigurationsAdapter
Download our FDT software adapter
WI-Manager:
WI-Manager
FDT RahmenSoftware
anwendung
http://www.weidmueller.com/fdt-dtm
Gerätetreiber
Software
orWeidmüller
scan DTM-Library
the QR code.
(DTMs)
8978
Down
Down
27
Bestellnummer: xx
SIL – Functional safety
You have strict requirements for functional safety
We make your functions safe
Safety in process automation and power technology couldn’t be more important
to you. For example, a reliable emergency shutdown which initiates appropriate
countermeasures in emergency situations is indispensable. These might extend to
the automatic shutdown of the system or subsystems within it.
As a partner in industrial connectivity, Weidmüller offers a
comprehensive solution for safety-sensitive areas, from the
control room through to the field.
Our SAFESERIES SIL relay is ideally suited for use in safetyrelated applications. It is designed for low and high demand
modes. With the wide range input voltage in the protective
circuit of 24 V to 230 V AC/DC, for example, you can control
back-up systems with high DC voltage. You get additional
flexibility for your applications with the optional ”G3“ coating
for use in aggressive environments.
28
The safe and reliable connection of measuring instruments,
actuators and sub-assemblies to the safety-relevant signal
circuit is handled by VARITECTOR SPC, our surge protection
for signal circuits. Certified for safety requirement level SIL 3
according to EN 61508, and accredited by TÜV NORD,
it can easily be incorporated into the safety calculations.
SIL – Functional safety
SAFESERIES
Typical safety integrated system (SIS)
•• Certified in accordance with EN
61508 for SIL 3 by TÜV NORD
•• Wide range voltage input of 24 V
to 230 V AC/DC to monitor field
signals
•• Other variants for burner management or ON/OFF ­switches
SIL
61508
Sicherheitsleitfaden
it in der
ale
n
Funktion
deSicherhe
der
itsleitfautomatis
it inierung
Prozessa
Sicherhe
Sicherhe ung
naleconnect.
ier
Let’s
Funktio
utomatis
Prozessa t.
nec
Let’s con
Let’s connect.
VARITECTOR SPC
•• 2 analogue or 4 digital signals in
only 17.8 mm width of space
•• Monitoring with status display
and alarm function
•• Can be tested with V-TEST in
accordance with IEC 62305
Find out more in our Functional
Safety booklet at:
www.wmqr.eu/huaen1
or scan the QR code.
3 14:26
07.01.1
07.01.13 14:26
Sicherheitsratgeber DE.indd
1
tgeber
heitsra
Sicher
d 1
DE.ind
29
ACT20P
Your practical requirements are many
Just like our ACT20P signal isolating converters
The reliable isolation and specific conversion of analogue signals plays an
increasingly important role in many areas of industry and technology. When
we developed the ACT20P signal converter we took full account of various
technical requirements of machine engineering, the process industry and energy
technology. In particular, the specifications of EN61010-1 provided important
basic parameters for the technology of the equipment.
Perfectly equipped for the machine engineering
sector
Filling systems and packaging machines used in the food
or pharmaceutical industry, for example, are a classic area
of application for signal converters. They convert analogue
signals such as temperature, pressure, fill level, flow, weight,
etc. directly into standard signals for processing by the PLC.
And best of all: a signal converter solution usually costs
much less than an input module in the remote-i/o-system
adapted to the specific requirements of the sensor.
Ideally suited for the process industry and energy
technology
In water treatment plants, conveyor technology, gas and
coal-fired power plants, energy distribution stations and
in many other types of plant in the process and energy
technology sector signal converters have two main functions:
on the one hand, they provide reliable galvanic isolation
– especially if the cables of the sensors from the field
are several hundred meters in length. On the other hand,
our signal converters enable individual signals such as
potentiometer signals from rotary encoders or TC type
J signals from temperature sensors to be adapted for the
standardised inputs of DCS- or Remote-i/o-systems.
30
ACT20P
Rapid device replacement
Signal converters are suitable for HART®,
transparent communication.
Reliable connection
Individually customisable protection against
mismatching.
More space in the cabinet
Two channels measure a mere 12.5 mm wide.
12,5 mm
Our main variants
IN
11
11
12
12
OUT
I
PLC
ACT20P-CI-CO
22
IN
11
11
12
12
OUT
2 wire
21
transmitter
2 wire
21
transmitter
Strom
3 wire
Quelle transmitter
passiv
51 52
24 V
DC
Strom
3 wire
Quelle transmitter
230 V
AC
ACT20P-CI-2CO
22
61 62
passiv
I
PLC
aktiv IN1
I
12
I
823.6
IN2
I
32
24 V
DC
passiv
OUT1
I
22
21
OUT2
I
61 62
supply
230 V
AC
24 V
DC
passiv
PLC
823.6
passiv
230 V
AC
ACT20P-2CI-2CO-12
31
ACT20P
High level of measurement accuracy in diverse applications
ACT20P Pro DCDC II impresses with extremely simple configuration
From machine construction to process and energy technology,
the secure isolation and precise conversion of analogue current
and voltage signals are counted among the most important
conditions for smooth processes.
The especially simple configuration and the integrated display
are the main features that make our Pro DCDC II analogue
signal converters from the ACT20P series stand out. Also, the
high-performance module, which measures just 12.5 mm wide,
has an all-purpose input range which boasts a high insulation
effect and above-average measurement accuracy. Reliable
connections are guaranteed thanks to individually configurable
protection against mismating and the release lever for the
female plug.
High process reliability
Thanks to the high level of galvanic isolation
amounting to 4 kV (600 V rated voltage), secure
operation is guaranteed.
4 kV
But these properties not only make the ACT20P Pro DCDC II
a universal solution. Above all else, the product cuts an
impressive figure as one of the most process-reliable and
accurate signal converters available on the market.
Your
special
advantages:
32
Integrated display
Uniquely simple and clear, the signal converters are configured
using the integrated display. As an add-on for the DIP-switches,
it makes configuration an especially intuitive process and
requires no other external devices.
ACT20P
Flexible supply
The wide supply range from 24 V to 230 V
AC/DC opens up a diverse range of applications
for the ACT20P Pro DCDC II.
Precise data recording
Measurement data is converted and transmitted
with an accuracy level of 0.05 %.
Universal solution
Due to the multitude of adjustable measurement
ranges from ± 300 V DC or ± 100 mA DC, the
input range can be deployed in an extremely
broad spectrum of applications.
33
ACT20P
Your requirements vary depending on the application
Our ACT20P devices cater for a wide range of applications
Limit monitoring with simple configuration ACT20PDPA-limit switch identifies even the smallest deviations
Universal input
The universal input range covers DC currents up
to 5 A and voltages up to 300 V, 2/3-wire RTD,
thermocouples, resistors and potentiometers to
500 kΩ.
Numerous alarm functions
Window alarm, alarm delay, wireline break
detection and hysteresis are just some of the
features with which the trip amplifier provides
the best conditions for each process requirement.
Configured directly at the device
A 7-segment display and LEDs support the direct
configuration by push buttons and potentiometer.
All-purpose inputs combined with output loop supply
ACT20 signal converters are equipped for diverse applications
All-purpose usage
The extensive input features RTD thermal sensors,
resistance signals, potentiometer signals and
DC signals (mA, V), so the widest range of input
signals can be connected to standard-i/o-subassemblies.
Numerous alarm functions
To name but a few examples, the alarm functions
include the window alarm, alarm delay, wire-break
recognition and hysteresis, so the solutions offer
the very best conditions for any and all process
requirements.
34
ACT20P
Precisely measure and monitor AC and DC currents
ACT20P-CMT current measuring transducers are precise
in all situations
High process reliability
Reliable function thanks to a galvanic four-way
isolation and an impulse withstand voltage of
6.4 kV according to IEC 61010-2-201.
Easy to install
The asymmetrical cable bushing makes it
easier to feed through the power cable and
permits precise measurement on an extremely
small space.
Precise measured values
The real-value effective procedure allows you
to record the connected load’s real power
consumption, so you can reliably identify when
levels exceed or fall below the nominal current.
Reading from load cells in versatile applications
Bridge-measuring transducer ACT20P-Bridge with
highest resolution
Exact measurement
The input with 6-conductor connection and very
high accuracy (0.05 % of the measurement range)
enables precise signal processing.
Conversion
Conversion of the bridge voltage in standardised
analogue signals. Supplies bridges up to
4 x 350 Ω with 10 V.
Tare calibration
Simple calibration of the empty (tare) weight can
be done on-site by using the button under the
front plate or with an external connection via a
PLC output.
On-site calibration
Simple and reliable calibration on-site. The
ACT20P-Bridge is adjusted to the different load
cells by means of a push button behind the
hinged panel.
35
ACT20P
ACT20P-CI-CO
ACT20P-CI-2CO
ACT20P-2CI-2CO-12
ACT20P-CMT
• Isolation of DC-signals
• HART® transparent
• Passive transmitter or
active current input
• 3-way-isolation
• Isolation and splitting of DC-signals
• HART® transparent
• Passive transmitter or
active current input
• 3-way-isolation
Signal splitter
Signal converter
Current-measuring transducer
Technical data
Technical data
Technical data
Technical data
Signal converter
Input
Input signal
2-/3-wire transmitter, HART digital signal
Input current
0(4) to 20 mA
Sensor supply
≥ 17 V @ 20 mA
Input
Input signal
2-/3-wire transmitter, HART digital signal
Input current
0(4) to 20 mA
Sensor supply
≥ 17 V @ 20 mA
Voltage drop
≤1V
Output
Output current
0(4) to 20 mA
Load resistance, current
≤ 550 Ω
IN
11
11
12
12
OUT
I
passiv
PLC
Strom
3 wire
Quelle transmitter
IN
11
11
12
12
OUT
I
2 wire
21
transmitter
51 52
24 V
DC
Strom
3 wire
Quelle transmitter
22
I
61 62
230 V
AC
24 V
DC
• Measurement and monitoring
of AC/DC-currents
• Input/output electrically isolated
• Input and output ranges are adjustable
• Contact-free through-hole technology
• Relay output for limit value alarm with
switching threshold, delay, hysteresis
Input
Input current
For input measurement range, see ordering data
Input signal
Current-carrying cable in feed-through hole,
Diameter 10.5 mm
Input frequency
AC: 15 to 700 Hz, DC: 0 to 5 Hz
Output (analogue)
Output voltage
adjustable, 0 to 5 V, 0 to 10 V, -5 to +5 V,
-10 to +10 V
Output current
adjustable, 0 to 20 mA, 4 to 20 mA, -20 to +20 mA
Load resistance, voltage
≥ 10 kΩ
Load resistance, current
≤ 600 Ω
Output (digital)
Type
Relay, 1 CO contact, open-circuit/closed-circuit
principle,
with alarm delay time (configurable)
0 s ⁄ 2 s ⁄ 5 s ⁄ 10 s
Nominal switching current
6A
AC switching voltage, max.
250 V
Input
Input current
0(4) to 20 mA
Voltage drop
≤1V
Output
Output current
0(4) to 20 mA
Load resistance, current
< 300 Ω, per channel
Voltage drop
≤1V
Output
Output current
0(4) to 20 mA
Load resistance, current
< 300 Ω
2 wire
21
transmitter
22
• Isolation of DC-signals
• Passive input
• 2-channels in one module
• 3-way-isolation
passiv
PLC
aktiv IN1
I
823.6
IN2
I
passiv
OUT1
I
12
22
OUT2
I
32
21
61 62
supply
230 V
AC
24 V
DC
passiv
Output signals *
Input signal
Current, voltage *
Current
PLC
Output
44
Output
Supply
823.6
43
+
I for AC
42
passiv
Input
230 V
AC
+
V
41
I for DC
Output signal
mA
-
-
Power supply
Relay
Ordering data
Type
ACT20P-CI-CO
36
Qty.
ST
Order No.
7760054114
Ordering data
Type
ACT20P-CI-2CO
Qty.
ST
Order No.
7760054115
Ordering data
Type
ACT20P-2CI-2CO-12
24
Ordering data
Output
51
Output
23
Qty.
ST
Order No.
7760054117
Supply
Type 22
Qty.
ACT20P-CMT-10-AO-RC-S 1
21
ACT20P-CMT-30-AO-RC-S 1
ACT20P-CMT-60-AO-RC-S 1
CO
Input
52
Order
No.
53
1510470000
54
1510540000
1510440000
GND
+16.8...31.2 V DC
ACT20P
ACT20P-PRO DCDC II-S
ACT20P-UI-2RCO-DC-S (DPA)
All-purpose DC isolating amplifier
All-purpose limit value monitoring
ACT20P-UI-AO-DO-LP-S (ITX+)
ACT20P-BRIDGE-S
All-purpose limit value monitoring
Bridge measuring transducer for
reading in from load cells
• Universally configurable input
and output for voltage/current
• Active or passive output
• All-purpose power supply 24 to 230 V AC/DC
• 3-way-isolation
• Convenient configuration on the device
with DIP-switches or by means of cleartext display + buttons, without reference
source.
• Universally configurable input
for temperature, voltage, current,
potentiometer, resistance
• 2 independent relay outputs with several
limit value functions: window alarm,
upper/lower limit value, hysteresis,
delay, etc.
• Configuration on device via 7-segment
display or via FDT/DTM-software
• External power supply 9 to 60 V DC
• Supply through output loop-powered
supply irrespective of the external
supply
• All-purpose usage thanks to versatile
input functions
• Simple software configuration
• Digital output for versatile limit value
settings
• 3-way-isolation
• Supplies measuring bridges
up to 4 x 350 Ω
• Simple tare calibration due
to ext. button or PLC-input
• Input and output ranges can
be adjusted via DIP-switches
Technical data
Technical data
Technical data
Technical data
Input
Input voltage
configurable, ± 20 mV to ± 300 V
Input current
configurable, ± 0.1 mA to ± 100 mA
Input resistance, current
< 5 mA: approx. 100 Ω; > 5 mA: approx. 5 Ω
Input resistance, voltage
approx. 1 MΩ
Output
Output voltage
configurable, 0 to ± 10 V
Output current
configurable, 0 to ± 20 mA (active/passive)
Load resistance, voltage
≥ 1 kΩ
Load resistance, current
≤ 600 Ω
Offset voltage
< 10 mV
Cut-off frequency (-3 dB)
<= 10kHz / < 10 Hz
Input
Sensor
Thermocouple: B, E, J, K, L, N, R, S, T, U, PT100/2/3-conductor, PT200, PT1000, N120, Cu 10,
potentiometer: 1.2 kΩ – 500 kΩ, resistance:
0 – 1.5 kΩ, resistance: 0 – 12 kΩ, resistance:
0 – 750 Ω
Input measurement range
configurable, type J thermocouple -100 to
+1200°C, type K thermocouple -200 to +1370°C,
PT100 -200 to +850°C
Input voltage
configurable, ± 150 mV DC, ± 600 mV DC, ± 30 V
DC, ± 300 V DC
Input current
configurable, ± 25 mA DC, ± 5 A DC
Output (digital)
Type
2 CO contacts
Nominal switching current
200 mA @ 110 V DC, 6A @ V DC / 240 V AC
,QSXWVLJQDOV
:LUH
P$
7UDQVPLWWHU
²
7[
9ROWDJH
&XUUHQW
2XWSXWVLJQDOV
3RW
57'5HV
7&
9
²
9
P9
9
9
²
$ODUP
P$
$ODUP
12
&RPPRQ
&RPPRQ
1&
12
&RPPRQ
&RPPRQ
1&
$
3RZHU6XSSO\
1HXWUDO1HJDWLYH²
/LYH3RVLWLYH
Input
Sensor
PT100/2-/3-/4-conductor, PT1000/2-/3-/4conductor, PT200, N120, thermocouples: B, E, J, K,
L, N, R, S, T, U, potentiometer
Input voltage
configurable, ± 300 V DC (min. measurement
range 100 V), 0 to 300 V AC (min. measurement
range 100 V)
Input current
configurable, ± 5 A DC (min. measurement
range 0.5 A)
Potentiometer
1.2 to 500 kΩ
Output
Type
Output-current loop-powered
Output current
4 to 20 mA, 20 to 4 mA, (current loop)
Load resistance, current
typ. 700 Ω @ 24 V DC
Output (digital)
Type
Transistor, open collector
Nominal switching voltage
≤ 30 V DC
Nominal switching current
20 mA
+
+
passive output
-
-
42
+
-
+
+
current
source
> 5 mA
Output
12
21
voltage
voltage
source
source
> 500 mV < 500 mV
active output
41
Input
51
Supply
current
source
< 5 mA
22
RLoad
Iout
+
ต
7&
&XUUHQW
P$
P9
Type
Qty.
ACT20P-PRO DCDC II-S
1
36
Order No.
1481970000
9
²
9
/RRS3RZHUHGP$
/RRS3RZHUHGP$
Ordering data
Type
ACT20P-UI-2RCO-S
Qty.
1
+ 23
Type
ACT20P-UI-2RCO-S
-
$ODUPYH
$ODUPYH
Qty.
1
0/4...20 mA
I +
11
12
excitation - 22
14
sens sense
Ordering data
24 Tare
excitation + 21
13
sense +
signal signal +
Order No.
7940045760
Strain
Gauge
9
9
Ordering data
9ROWDJH
9
²
9
ต
7[
57'5HV
$
J9,
Iout
24...230 V AC/DC
52
9,3RW57'7&
+24VDC
Input measurement range
± 10 mV / ± 20 mV / ± 30 mV / ± 50 mV
(configurable)
Input resistance
≥ 87 Ω
Supply current
120 mA @ 10 V (= 4 x 350 Ω bridge resistance)
Bridge supply voltage
5 V or 10 V
Output
Type
Voltage and current output (configurable)
Output signal
0 to 11 V / 0 to 22 mA (adjustable)
Load resistance, voltage/current
600 Ω / 1 kΩ
Residual ripple
< 0.05 from signal range
3RW
11
-
Input
Type
Resistance measuring bridge
Bridge sensitivity
1.0 mV / V to 5.0 mV / V
V/I
PS
41
42
0...10 V
44
mA test point +
43
mA test point -
10...60 V DC
+ 54
53
Order No.
7940045760
Ordering data
Type
ACT20P-UI-2RCO-S
Qty.
1
Order No.
7940045760
37
ACT20M
Reliable conversion and isolation of signals
in the narrowest of spaces
ACT20M signal converters are just 6 mm wide
Looking for more space in your switch cabinet? In the shape of our ACT20M series
and our ACT20-FEED-IN supply modules, we have the ideal space-saving solution
for you.
The ACT20M series combines innovative technology with the highest level of
functionality in an electronics housing only 6 mm wide. The supply device
eliminates the need to wire a power supply to the modules and thus reduces
installation time by at least 30%. The ACT20-FEED-IN-PRO-S can supply and
monitor as many as 120 devices which are mounted on the CH20 DIN rail bus.
The ACT20M series includes passive isolators, universal measuring transducers,
DC isolating amplifiers and signal splitters, which can also read bipolar input
voltages. Temperature transducers and power-supply devices are also available.
Fast and simple installation
The ability to snap modules onto the rail bus
ensures that the power supply can be quickly
and easily installed. Power can be supplied via a
supply module or any ACT20M module.
Robust
ACT20M signal converters operate
reliably in a wide temperature range
spanning –25°C to +70°C.
+70 ℃
-25 ℃
38
ACT20M
High process reliability
Galvanic isolation of 2.5 kV (300 V rated
voltage), and a high measurement accuracy of
up to 0.05 % ensures process reliability.
2,5 kV
They can be customised to your
application
VARITECTOR SPC pluggable surge
protection with troubleshooting and
remote control features.
Simple configuration
The device is configured quickly and easily
using the DIP-switch or with manufacturerindependent FDT/DTM-software, for example
WI-Manager.
The DIP switch can be configured
simply on the module
In the “ACT20M Tool”-software, simply
select the type of input and output,
and set the DIP-switch configuration as
displayed.
Download the ACT20M software tool
here: www.wmqr.eu/a20ten1
39
ACT20M
You need a high functional density
We convert and double your signals in a confined space
The trend in process technology towards fitting the greatest functionality in the
smallest space continues. For example, an enormous number of analogue signals
have to be converted in the core element of a steam cycle. The ACT20M signal
splitter isolates, converts and duplicates your analogue signals in only 6 mm of
width. With this function, while the signal is being converted for control and
monitoring purposes, it can also be visualised locally on a display.
By combining the ACT20M series, the ACT20-FEED-IN and
the PRO-H power supply, we offer you a precisely coordinated
power solution for the ACT20M series signal converters. The
supply voltage is provided at a constant 24 V via the CH20M
DIN rail bus system. In addition to its slim width, the ACT20M
boasts international approvals such as cULus, ATEX Zone 2,
FM Div. 2, GL and DNV, which makes the signal converter
suitable for use in different applications all over the world.
The ACT20-FEED-IN device can supply up to 120 ACT20M
signal converters. It immediately recognises a mains failure or
other error, displays this via LEDs and automatically switches
to the back-up power supply.
40
The safe, reliable PRO-H series of power supply units in
compact format we specifically developed for tough
requirements, especially for use in hazardous areas. Parallel
power supplies offer reliable functional reliability when the
failure of one device means the entire load is taken over by the
second device. Thanks to high MTBF (mean time between
failures) of up to 1.8 million hours, PRO-H is particularly well
suited to the process area and to power technology.
ACT20M
ACT20M
PRO-H
•• Signal splitter with sensor supply only 6 mm wide
•• Power supply via mounting rail bus system
•• Configuration via DIP-switch or FDT/DTM-software
•• Electric isolation up to 2.5 kV at 300 V rated voltage
•• MTBF of up to 1.8 million hours
•• Remote-ON/OFF-switch
•• Redundant system set-up with 100 % load distribution
•• Can be used in temperatures from -25 to +70 °C
41
ACT20M
You have individual requirements
We have a flexible product range
ACT20M-UI-AO-S
Universal measuring transducer for acquiring, isolating and
converting analogue V/I-signals, 2/3/4-wire RTD and TC
temperature sensors. 4-way-isolation and very good isolation
properties for the external power supply guarantee a high
level of accuracy. The device is configured using FDT/DTMsoftware.
ACT20M-CI-2CO-S
0(4)–20 mA DC current splitter with fixed settings and
4-way-isolation for doubling the input signal. The sensor
signal can be simultaneously transmitted to a controller and
evaluated by an external display.
I, U, R
IN
4
5
I, U
3
6
OUT
2
1
7
82
83
Supply
PLC
24 V
DC
8
230 V
AC
Supply
I IN
I OUT 2
4
5
3
6
2
7
1
82
83
8
I OUT 1
Supply
PLC
24 V
DC
230 V
AC
Supply
ACT20M-AI-2AO-S
The signal splitter for analogue V/I-signals features 4-wayisolation and can eb configured using a DIP-switch. The
input signal is doubled on the output side so it can, for
example, be transmitted simultaneously to a controller
and a display.
I, U
4
5
I, U
IN
3
6
OUT 1
I, U
2
7
OUT 2
1
82
83
Supply
PLC
24 V
DC
8
230 V
AC
Supply
ACT20M-BAI-2AO-S
The signal splitter for converting bipolar analogue input
signals to unipolar output signals can be configured using
a DIP-switch. The input signal is doubled on the output side
and can, for example, be transmitted simultaneously to a
controller and a display. The device has 4-way-isolation
and selectable filtering properties for slow and fast signal
acquisition.
ACT20M-AI-AO-E-S
Universal V/I-DC-converter, configurable with a DIP-switch,
without sensor feed. Features 3-way-isolation and an
external power source.
I, U
4
5
I, U
IN
3
6
OUT 1
I, U
2
7
OUT 2
1
82
83
24 V
DC
8
230 V
AC
Supply
I, U
4
5
I, U
IN
3
6
OUT
2
7
1
82
83
Supply
42
Supply
PLC
8
Supply
PLC
24 V
DC
230 V
AC
I, U
4
5
I, U
IN
3
6
OUT
2
7
1
82
83
Supply
ACT20M-AI-AO-S
Universal V/I-supply-isolator, configurable with a DIP-switch.
Passive sensors can be supplied directly with power.3-wayisolation and an external power source guarantee a high
level of accuracy.
PLC
24 V
DC
8
230 V
AC
Supply
I, U
4
5
I, U
IN
3
6
OUT
2
7
1
82
83
Supply
ACT20M-BAI-AO-S
Signal converter, configurable with a DIP-switch, for
converting bipolar analogue input signals into unipolar
analogue output signals. The device has high 3-way-isolation
and selectable filtering properties for slow and fast signal
acquisition.
PLC
24 V
DC
8
230 V
AC
Supply
I IN 1
I IN 2
24 V
DC
4
5
3
6
2
7
1
8
4
5
3
6
2
7
1
8
I OUT 1
PLC
I OUT 2
PLC
ACT20M-CI-CO-ILP-S and ACT20M-2CI-2CO-ILP-S
1- or 2-channel output-current loop powered passive isolator.
Safe transmission and isolation of 0(4) – 20-mA-signals in
applicationswhere no external source of power is available.
230 V
AC
I IN 1
I IN 2
ACT20M-CI-CO-OLP-S and ACT20M-2CI-2CO-OLP-S
1- or 2-channel output-current loop powered signal isolator
for 0(4) – 20-mA-input-signals. Safe transmission and
isolation of DC current signals whereby power is supplied to
the isolator in a decentralised way through the PLC/DCS.
PLC
I OUT 1
I OUT 2
24 V
DC
I IN
4
5
3
6
2
7
1
82
83
8
I OUT
Supply
PLC
24 V
DC
230 V
AC
230 V
AC
ACT20M-CI-CO-S
0(4)–20 mA DC current isolator with fixed settings, 3-way
isolation and a high level of accuracy. Specially designed for
the transmission of the most frequently used types of signals
in analogue signal processing.
Supply
43
ACT20M
The choice is yours
Product selection and accessories for your application
24 V DC and
CH20M Din rail bus
Output loop powered
2 x 0 … 20 mA
4 … 20 mA
1 x 4 … 20 mA
2 x 4 … 20 mA
24 V DC and
CH20M Din rail bus
Output loop powered
Input loop powered
1 x 4 … 20 mA
–10 mA … 0 … 10 mA
–20 mA … 0 … 20 mA
loop powered
Input
voltage
0…5V
1…5V
24 V DC and
CH20M Din rail bus
24 V DC and
CH20M Din rail bus
0 … 10 V
2 … 10 V
–5 V … 0 … 5 V
–10 V … 0 … 10 V
2-, 3-, 4-conductor
PT100
Output loop powered
24 V DC
24 V DC and
CH20M Din rail bus
PT1000
TC
B
E
J
K
24 V DC and
Din rail bus
Output loop powered
24 V DC
24 V DC and
CH20M Din rail bus
Output loop powered
24 V DC
24 V DC and
CH20M Din rail bus
L, LR, N, R, S, T, U W3, W5
Poti
10R …100k
24 V DC and CH20M Din rail bus
R
10R …100k
24 V DC and CH20M Din rail bus
*1: only 4 ... 20 mA
44
ACT20M-UI-AO-S
universal
U/I
current
U/I
U/I
current
current
current
universal
U/I
current
U/I
U/I
current
current
current
current
current
bipolar
bipolar
universal
U/I
ACT20M-UI-AO-S
ACT20M-CI-CO-ILP-S
ACT20M-BAI-AO-S
ACT20M-BAI-AO-S
ACT20M-UI-AO-S
ACT20M-AI-AO-S
universal
U/I
U/I
universal
U/I
U/I
bipolar
bipolar
ACT20M-UI-AO-S
ACT20M-AI-AO-E-S
ACT20M-AI-AO-S
ACT20M-UI-AO-S
ACT20M-AI-AO-E-S
ACT20M-AI-AO-S
ACT20M-BAI-AO-S
ACT20M-BAI-AO-S
temp.
temp.
temp.
universal
temp.
universal
ACT20M-RTCI-CO-OLP-S *1
ACT20M-RTI-CO-EOLP-S *1
ACT20M-RTI-AO-E-S
ACT20M-UI-AO-S
ACT20M-RTI-AO-S
ACT20M-UI-AO-S
universal
universal
temp.
temp.
universal
temp.
temp.
temp.
universal
temp.
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-RTCI-CO-OLP-S *1
ACT20M-TCI-AO-E-S
ACT20M-UI-AO-S
ACT20M-TCI-AO-S
ACT20M-RTCI-CO-OLP-S *1
ACT20M-TCI-AO-E-S
ACT20M-UI-AO-S
ACT20M-TCI-AO-S
ACT20M-UI-AO-S
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-AI-2AO-S
ACT20M-CI-2CO-S
ACT20M-AI-AO-E-S
ACT20M-AI-AO-S
ACT20M-CI-CO-S
ACT20M-CI-CO-OLP-S *1
ACT20M-AI-2AO-S
ACT20M-AI-AO-E-S
ACT20M-AI-AO-S
ACT20M-2CI-2CO-OLP-S *1
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-AI-2AO-S
ACT20M-CI-2CO-S
ACT20M-AI-AO-E-S
ACT20M-AI-AO-S
ACT20M-CI-CO-S
ACT20M-CI-CO-OLP-S *1
0 … 10 V/2 … 10 V
0 ... 5 V/2 ... 5 V
2-channel/splitter
0 … 10 V/2 … 10 V
0 ... 5 V/2 ... 5 V
1-channel
0/4 … 20 mA
2-channel/splitter
0/4 … 20 mA
1-channel
Function
Current
0 … 20 mA
–20 mA … 20 mA
–10 mA … 10 mA
1-channel bipolar
Output
Voltage supply
ACT20M-AI-2AO-S
ACT20M-AI-AO-E-S
ACT20M-AI-AO-S
ACT20M-2CI-2CO-OLP-S *1
ACT20M-2CI-2CO-ILP-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-AO-S
ACT20M-BAI-AO-S
ACT20M-UI-AO-S
ACT20M-AI-AO-S
ACT20M-UI-AO-S
ACT20M-AI-AO-E-S
ACT20M-AI-AO-S
ACT20M-UI-AO-S
ACT20M-AI-AO-E-S
ACT20M-AI-AO-S
ACT20M-BAI-AO-S
ACT20M-BAI-AO-S
ACT20M-RTI-AO-E-S
ACT20M-UI-AO-S
ACT20M-RTI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-TCI-AO-E-S
ACT20M-UI-AO-S
ACT20M-TCI-AO-S
ACT20M-TCI-AO-E-S
ACT20M-UI-AO-S
ACT20M-TCI-AO-S
ACT20M-UI-AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
ACT20M
Gerätekonfiguration für analoge Signalwandler
Mit FDT- und FDT2 Technologie
Let’s connect.
ACT20 power-feed module
• Distributes the supply onto the busbar
• Compatible with Weidmüller CH20M
DIN rail bus
• Optional connection for backup supply
• Approved for use in Ex-Zone 2/Div. 2
• Monitoring of the supply voltage
• Alarm alerts via the status relay
ACT20-Feed-In-PRO-S
ACT20-Feed-In-BASIC-S
Technical data
Input
21.6…26.4 V DC
21.6…26.4 V DC
Supply voltage
max. 4 A
0.5...2.5 A DC
Input current
Softwareunterstützte Bearbeitung
und Konfiguration von Geräten in Ihrer Anlage vereinfachen die Inbetriebnahme und
21.6…26.4 V DC
Backup-supply
Fehler < 21 V DC
Trigger level for the power supply
Wartung. Für unsere PC-konfigurierbaren
ACT20-Signalwandler bieten wir eine vollständige Lösung mittels FDT-Techno
Output, power supply
an. Unser WI-Manager ist eine FDT- und FDT2 Rahmenapplikation und unterstützt somit alle Gerätetreiber (Device Type
Input voltage -0.5 V DC @ 4 A
Corresponds to the input voltage
Output voltage
Manager = DTM) unserer PC-konfigurierbaren
Produkte. Unsere DTM-Treiber bieten Ihnen über grafische Oberflächen d
96 W
Output power
Bedienen und Beobachtenmax.
von
Equivalent toan.
input current
4 A Geräten sowie deren einfache Konfiguration
Output current
Output, status relay in safe zone
250 V/30 V
250 V/30 V
Max. switching voltage, AC/Max. switching voltage, DC
1 Integrierte
Sicherheit
2 A AC/DC
Continuous current
Durch
die
Benutzerverwaltung
des WI-Managers
500 VA/60 W
AC power, max.
kann der Zugriff auf unkritische Gerätefunktionen
beschränkt werden. Hierdurch erhöht sich die
Sicherheit
der Anlage.
Versorgung, +24 V
41 Statusrelais, N.O.
Screw connection
Type
ACT20-FEED-IN-PRO-S
82
81
NC
83
Status
0V
84
+24 V
NC
Order data
NC
85
Qty.
1 pc.
Order No.
8965500000
Use our product assistant to select the
right product for your application:
www.wmqr.eu/pasc1
or scan the QR code.
Let’s connect.
2 Zentrale
Versorgung, 0 VDatenverwaltung
Die zentrale Verwaltung aller verfügbaren Projekt- u
Produktdaten, in einem einheitlichen Datenformat,
senkt die Kosten für Software-Management und
Datenadministration.
Let’s connect.
Type FDT Funktionalität
Qty.
Order No.
3 Volle
ACT20-FEED-IN-BASIC-S
1 pc.
1282490000
Der WI-Manager unterstützt in vollem Umfang die
Funktionen von FDT und FDT2 und ist dadurch
zukunftssicher und abwärtskompatibel.
4 Universelle Netzwerk-Topologie
If you
require the package
insert for
Unterschiedlichste
Kommunikationsprotokolle
ACT20X
products,
please consultDTMs im WI-Manage
werden
durch entsprechende
ourunterstützt.
online catalogue:
http://catalog.weidmueller.com
or scan the QR code.
Bezeichnung
Let’s connect.
If you require IECEx/ATEXHier
könnenplease
Sie unsere
approvals,
visit:
FDT/DTM-Software
downloaden:
www.wmqr.eu/iazen1
http://www.weidmueller.de/FDT-DTM
or scan the QR code.
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
32758 Detmold, Germany
Telefon +49 5231 14-0
Telefax +49 5231 14-2083
[email protected]
www.weidmueller.com
CBX200 USB
Let’s connect.
NC
42 Statusrelais, gemeinsam
Backup, 0 V 54
0V
43 Statusrelais, N.C.
Backup, +24 V 53
+24 V
44 NC
Versorgung, +24 V 52
NC
Alarm
Versorgung, 0 V 51
Funktion
Typ
KonfigurationsAdapter
Download our FDT-software adapter
WI-Manager:
WI-Manager
FDT RahmenSoftware
anwendung
http://www.weidmueller.com/fdt-dtm
Gerätetreiber
Software
orWeidmüller
scan DTM-Library
the QR code.
(DTMs)
8978
Down
Down
45
Bestellnummer: xx
ACT20M
Power-feed module for the CH20M DIN rail bus
4 A supply with backup supply and
error analysis
The power-feed unit ACT20-FEED-IN-PRO-S supplies the
devices on the CH20M DIN rail bus with 24 V DC. At the
same time, the FEED-IN device reads the group error
contact – optionally provided by the installed devices –
from the CH20M DIN rail bus and sends a message through
the status supplies can be connected for the primary and
secondary supplies (backup). An installation in Zone 2/
Division 2 is also possible. Three LEDs show the status of
the power supply and the error status.
46
Up to 120 devices can be mounted on a CH20M DIN rail
bus. Quick internal status relay. The FEED-IN-PRO device
immediately recognises and displays when a power supply
has failed. The supply is then switched automatically to the
redundant power supply.
Weidmüller offers a compact and narrow 6 mm feed-in
module as an alternative. This wires the terminal level
directly to the CH20M DIN rail bus. Up to 80 modules can
be fed.
ACT20M
Rail bus accessories
CH20M BUS-PROFIL TS35x7.5/1000
CH20M BUS-AP LI TS35x7.5 & 15
CH20M BUS 4.50/05 AU/1000
Support section for bus circuit board
End plate
Bus PCB
• End plate for CH20M DIN rail bus
• Fits on TS 35 x 7.5 and TS 35 x 15
• right and left
• Bus circuit board for use on TS 35 x 7.5
and TS 35 x 15
• Length: 250, 500 or 750 mm
• Five conductor paths, gold-plated
• Electrical rating: 63 V AC, 5 A/conductor path
• Support section for TS 35 x 7.5 and TS 35 x 15
• Length: 250, 500 or 750 mm
Order data
Type
CH20M BUS-PROFIL TS35x7.5/250
CH20M BUS-PROFIL TS35x7.5/500
CH20M BUS-PROFIL TS35x7.5/750
Qty.
10
10
5
Order No.
1248150000
1248160000
1248170000
CH20M BUS-PROFIL TS35x15/250
CH20M BUS-PROFIL TS35x15/500
CH20M BUS-PROFIL TS35x15/750
5
5
5
1248180000
1248190000
1248210000
Order data
Type
CH20M BUS-AP LI TS35x7.5 & 15
Qty.
Order No.
1193160000
CH20M BUS-AP RE TS35x7.5 & 15
50
1193170000
50
Order data
Type
CH20M BUS 4.50/05 AU/250
CH20M BUS 4.50/05 AU/500
CH20M BUS 4.50/05 AU/750
Qty.
10
10
5
CH20M BUS-ADP TS35/1000
SET CH20M BUS 250MM TS 35X15
SET CH20M BUS 250MM TS 35X7.5
Cover plate
Set
Set
• Cover plate for CH20M DIN rail bus
• Length: 250, 500 or 750 mm
• SET consists of one each of
CH20M BUS 4.50/05 AU/250
CH20M BUS-ADP TS 35/250
CH20M BUS-AP LI TS 35X7.5 & 15
CH20M BUS-AP RE TS 35X7.5 & 15
CH20M BUS-PROFIL TS 35X15/250
• SET consists of one each of
CH20M BUS 4.50/05 AU/250
CH20M BUS-ADP TS 35/250
CH20M BUS-AP LI TS 35X7.5 & 15
CH20M BUS-AP RE TS 35X7.5 & 15
CH20M BUS-PROFIL TS 35X7.5/250
Order data
Type
CH20M BUS-ADP TS35/250
CH20M BUS-ADP TS35/500
CH20M BUS-ADP TS35/750
Qty.
10
10
5
Order No.
1248250000
1248260000
1248270000
Order data
Type
SET CH20M BUS 250MM TS 35X15
Qty.
1
Order No.
1335150000
Order data
Type
SET CH20M BUS 250MM TS 35X7.5
Qty.
1
Order No.
1248220000
1248230000
1248240000
Order No.
1335140000
47
MCZ
Isolate and convert signals at the interface level
MCZ signal converter in terminal format
The MCZ-SERIES signal converters have a slim terminal
design and convert, isolate and monitor analogue signals.
They have five tension clamp connections. The open side
of the housing can be closed using a standard cover plate
accessory. The housing has a low height of just 6.3 cm.
It also accommodates a cross-connector for reducing the
wiring of multiple module‘s 24 V and 0 V connections.
Two WS10/6-markers can be used for labelling. These
are available in MultiCard format and can be printed using
Weidmüller‘s professional printing system.
Saves space in the electrical cabinet
High product density (modules only
6 mm wide) reduces space taken on the DIN rail.
m
63 mm
6m
Your
special
advantages:
48
Slim design
At the interface level signals are often connected to machineoriented or customer-specific encoders. These should be
individually adapted. The typical terminal block design of the
MCZ signal converter allows it to be used on site instead of
the corresponding modular terminal, thus allowing external
analogue signals to be individually isolated and processed.
MCZ
Security
Electrical isolation increases the safety of
operations and reduces the risk of facility
malfunctions.
U/I
U/I
Vc
Simple wiring
The power supply can easily be bridged from
one module to the next using pluggable crossconnections.
49
MCZ
MCZ CCC / ILP
MCZ PT100/3 CLP / OLP
Input current loop feed
RTD 2-/3-conductor converter
Output-current loop-powered
• Passive isolators for galvanic isolation of (0)4 to
20 mA standard signals
• The component draws power from the measurement
signal and requires no additional auxiliary power
• Low energy consumption
• pick-up current of < 100 µA
• 2-way-isolation
Technical data
Input
Input voltage/input current
0(4) to 20 mA current loop
Pick-up current
< 100 µA
Voltage drop
2.5 to 3 V at 20 mA
Output
Output current
0(4) to 20 mA
Load resistance, current
≤ 500 Ω
Accuracy
< 0.1% of end value
Temperature coefficient
≤ 50 ppm/K from measured value at 0 Ω load resistance
Cut-off frequency (-3 dB)
100 Hz
MCZ VFC
DC/f-converter
• RTD signal converter for galvanic isolation
and conversion of PT100-signals
• The component draws power from the output circuit
and requires no additional auxiliary power
• 2-way-isolation
Technical data
The analogue voltage input signal is converted into a
configurable frequency signal. Thus analogue signals
can be read in by the PLC’s counter inputs.
Technical data
Input
Sensor
PT100/2-/3-conductor (according to IEC 751)
Sensor supply
0.8 mA
Output
Output current
4 to 20 mA (current loop with 9...30 V DC)
Load resistance, current
≤ 600 Ω
Input
Input voltage/input current
0 to 10 V
Input resistance, voltage/current
100 kΩ
Output
Output frequency
0 to 1/4/8/16 kHz
Output level
PNP, Ub - 0.7 V
Output current
max. 20 mA
Accuracy
0.2% of FSR
Temperature coefficient
≤ 250 ppm/K
Status indicator
LED, pulsing
PT100
I
U/I
J
I
U/I
I
VC
Vcc
4
+24V
Output
5
3 GND
Ordering data
Type
MCZ CCC 0 – 20 mA / 0 – 20 mA
50
Ordering data
Qty.
10 ST
Order No.
8411190000
Type
MCZ PT100/3 CLP 0 to 100°C
MCZ PT100/3 CLP 0 to 120°C
MCZ PT100/3 CLP 0 to 150°C
MCZ PT100/3 CLP 0 to 200°C
MCZ PT100/3 CLP 0 to 300°C
MCZ PT100/3 CLP -50°C to +150°C
MCZ PT100/3 CLP -40°C to 100°C
f
f f/2f/4f/16
Input
1
0...10V
OV
f
2
U
16kHz
Ordering data
Qty.
10
10
10
10
10
10
10
Order No.
8425720000
8483680000
8604420000
8473010000
8473020000
8473000000
8604430000
Type
MCZ VFC 0 – 10V
Qty.
10 ST
Order No.
8461470000
MCZ
MCZ CFC
MCZ SC 0 to 10 V
MCZ SC 0 to 20 mA
DC/f-converter
Transistor output
Transistor output
Technical data
Technical data
Technical data
The current input signal is converted into a configurable
frequency signal. Thus analogue signals can be read in by
the PLC’s counter inputs.
Input
Input voltage/input current
0 to 20 mA
Input resistance, voltage/current
50 Ω
Voltage drop
1 V at 20 mA
Output
Output frequency
0 to 1/4/8/16 kHz
Output level
PNP, Ub - 0.7 V
Output current
max. 20 mA
Accuracy
0.2% of FSR
Temperature coefficient
≤ 250 ppm/K
Status indicator
LED, pulsing
• 2 digital outputs
• Monitoring of an upper
and a lower limit value
• 3 current input ranges selectable
• 2 digital outputs
• Monitoring of an upper
and a lower limit value
• 3 voltage input ranges selectable
Input
Input voltage/input current
0 to 10 V
Input resistance, voltage/current
60 kΩ
Output
Contact assembly
2-way PNP switching output
Function
UIN<UTH1: output 1 active / UIN>UTH2: output 2 active
Switching thresholds
via 2 potentiometers (12 revolutions)
Hysteresis
1% of the adjusted end value
Switching current
50 mA – per channel (voltage drop at transistor: < 1.2 V at 50 mA)
Step response time
< 250 µs (switching threshold at 90% of the max. input sig. ;
RI ≤ 1 kΩ)
Cut-off frequency (-3 dB)
100 Hz
Temperature coefficient max. 250 ppm/K
Input
Input voltage/input current
0.5 to 20 mA
Input resistance, voltage/current
50 Ω
Voltage drop 1 V
Output
Contact assembly
2-way PNP switching output
Function
IIN<ITH1: output 1 active; IIN>ITH2: output 2 active
Switching thresholds
via 2 potentiometers (12 revolutions)
Hysteresis
1% of the adjusted end value
Switching current
50 mA – per channel (voltage drop at transistor: < 1.2 V at 50 mA)
Step response time
< 250 µs (switching threshold 90% of the max. input sig. ; RI ≤ 1 kΩ)
Cut-off frequency (-3 dB) 100 Hz
Temperature coefficient max. 250 ppm/K
U/I
U/I
U/I
I
VC
Vcc
5
+24V
Output
5
3 GND
f
f f/2f/4f/16
Input
4
1
0...20mA
OV
2
f
I
Output1
max.50mA
5
16kHz
Output2
max.50mA
VC
P1
Th1
P2
Th2
4
2
OV
3 Vcc
+24V
Output1
max.50mA
Input
0...10mA
1
Qty.
10 ST
Order No.
8461480000
Type
MCZ SC 0 – 10 V
Th1
P2
Th2
Input
0...20mA
1
Output2
max.50mA
Ordering data
Type
MCZ CFC 0 – 20 mA
5
2
OV
3 Vcc
+24V
P1
Qty.
10 ST
Order No.
8260280000
Ordering data
Type
MCZ SC 0 – 20 mA
Qty.
10 ST
Order No.
8227350000
51
FDT
Device configuration for analogue signal conditioner
using FDT- and FDT2-technology
The WI-Manager is a device-management frame application which
supports the FDT and FDT2 (Field Device Tool) standards. The software
can be used to configure and maintain all of our configurable ACT20
devices. It can manage all device drivers that are available through
their DTM (Device Type Manager). The DTM permits access to device
data with a graphical user interface (GUI) that offers the user a variety
of functions such as configuration, operation and monitoring of
devices. WI-Manager helps to reduce the costs related to planning and
maintaining the devices in a facility.
Full FDT-functionality
The WI-Manager software provides total support
for FDT and FDT2 functions. As such, it is both
state-of-the-art and backwards compatible.
Universal network topology
WI-Manager supports all communication
protocols though their corresponding DTMs.
p
i
t
52
p
i
p
l
l
FDT
Integrated security
The WI-Manager user administration allows
access to be limited to uncritical device
functions. This increases the overall safety and
security of the facility.
Centralised data management
Centralised administration of all available
project and product data in one unified
format – the result is reduced software
management and data administration
costs.
p
p
i
i
Automated network planning
Connected networks and products are
automatically detected and displayed by means
of the SCAN function. This makes planning and
initial commissioning easier.
p
i
t
p
i
p
l
l
53
FDT
Configure and monitor
With the latest FDT2-technology
With the universal frame application WI-Manager, you can easily configure the
ACT20C signal converter via the front-side service interface as well as via Ethernet.
The WI-Manager fully supports the features of FDT and FDT2 and is therefore
future-proof. The information gained in the ACT20C for device status, signals and
data are provided over Ethernet via Modbus TCP. Within your network you can
access from your SCADA system and using an Industrial Ethernet router you can
query data location-independent over the Internet.
Teleservicing
Management/
enterprise level
Ethernet
Engineering/
supervisory level
Industrial Ethernet
Feldbus /Fieldbus
Control level
Field level
54
Gerätekonfiguration für analoge Signalwandler
Mit FDT- und FDT2 Technologie
Let’s connect.
Gerätekonfiguration
Signalwandler
Device configurationfür
foranaloge
analogue
signal converter
Mit
WithFDTFDTund
andFDT2
FDT2Technologie
technology
Let’s
Let’s connect.
connect.
FDT
Connect to the network
•• Remote access to arbitrary
Softwareunterstützte
Bearbeitung
und Konfiguration von Geräten in Ihrer Anlage vereinfachen die Inbetriebnahme und
network
topologies
Wartung. Für unsere
PC-konfigurierbaren
ACT20-Signalwandler bieten wir eine vollständige Lösung mittels FDT-Techno
•• Simple
access to diagnostics
an. Unser WI-Manager
ist eine FDT- und FDT2 Rahmenapplikation und unterstützt somit alle Gerätetreiber (Device Type
and configuration
Manager = DTM)
unserer PC-konfigurierbaren
Produkte. Unsere DTM-Treiber bieten Ihnen über grafische Oberflächen d
•• Condition
monitoring
Bedienen und Beobachten von Geräten sowie deren einfache Konfiguration an.
1 Integrierte Sicherheit
Durch die Benutzerverwaltung des WI-Managers
Softwareunterstützte Bearbeitung und Konfiguration von Geräten in Ihrer Anlage vereinfachen
Inbetriebnahme
undGerätefunktionen
kann der die
Zugriff
auf unkritische
Software Für
aided
processing
and configuration
of devices in your system
simplify
commissioning
and mittels
maintenance.
For our
Wartung.
unsere
PC-konfigurierbaren
ACT20-Signalwandler
bieten wir
eine vollständige
Lösung
FDT-Technologie
beschränkt
werden.
Hierdurch
erhöht
PC
configurable
ACT20
signal
conditioner,
we
offer
a
complete
solution
by
using
FDT
technology.
Our
WI
Manager
is
a FDTsich die
an. Unser WI-Manager ist eine FDT- und FDT2 Control/PLC
Rahmenapplikation und unterstützt somit
alle Gerätetreiber
(Device Type
Sicherheit
der
Anlage.
and FDT2=frame
and therefore supports
all device
drivers
(DTM = bieten
DeviceIhnen
Type über
Manager) of our PC configurable
Manager
DTM)application
unserer PC-konfigurierbaren
Produkte.
Unsere
DTM-Treiber
Remote-I/O-System
u-remote grafische Oberflächen das
products.
Our
DTM
drivers
provide
you
with
a
graphical
interface
to
configurate,
operate
and
monitor devices easily.
Bedienen und Beobachten von Geräten sowie deren einfache Konfiguration an.
2 Zentrale Datenverwaltung
Die zentrale Verwaltung aller verfügbaren Projekt- u
1 Integrierte Sicherheit
Produktdaten, in einem einheitlichen Datenformat,
1 Durch
Integrated
Safety
die Benutzerverwaltung
des für
WI-Managers
senkt die Kosten
und
With der
the Zugriff
user administration
of Gerätefunktionen
the WISoftware-Management
Manager the
kann
auf
unkritische
Datenadministration.
access to non-critical
device functions
candie
be limited.
beschränkt
werden. Hierdurch
erhöht sich
This
increases
the
safety
of
the
plant.
Sicherheit der Anlage.
3 Volle FDT Funktionalität
Condition monitoring
ACT20C-station
Point-to-point configuration
•• Integrated security
Hier können Sie unsere
•• Offline configuration
FDT/DTM-Software
downloaden:
•• Optimum overview
of
http://www.weidmueller.de/FDT-DTM
Field devices
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
32758 Detmold, Germany
Hier können Sie unsere
Telefon +49 5231 14-0
Here you can download
Telefax
+49our
5231 14-2083
FDT/DTM-Software
downloaden:
[email protected]
FDT/DTM software:
http://www.weidmueller.de/FDT-DTM
www.weidmueller.com
http://www.weidmueller.com/FDT-DTM
Weidmüller Interface GmbH & Co. KG
Weidmüller Interface
Klingenbergstraße
16 GmbH & Co. KG
Klingenbergstraße
16
32758
Detmold, Germany
32758 +49
Detmold,
Telefon
5231Germany
14-0
Telefon+49
+495231
523114-2083
14-0
Telefax
Telefax +49 5231 14-2083
[email protected]
[email protected]
www.weidmueller.com
Der
WI-Manager unterstützt in vollem Umfang die
Centralised
data
management
22 Zentrale
Datenverwaltung
Funktionen von
FDT
und FDT2
und and
ist dadurch
The
centralised
management
of all
available
project
Die zentrale Verwaltung
aller verfügbaren
Projektund
zukunftssicher
und
abwärtskompatibel.
product data ininaeinem
unifiedeinheitlichen
data format Datenformat,
reduces the costs
Produktdaten,
of
software
management
data
administration.
Energy
senkt die Kosten4 für
Software-Management
und
Universelle
Netzwerk-Topologie
Datenadministration.
Unterschiedlichste Kommunikationsprotokolle
3 Full FDT functionality
werden
durch the
entsprechende
The
WI
Manager
fully supports
functions ofDTMs
FDT im WI-Manage
3 Volle FDT Funktionalität
unterstützt.
and
FDT2.
Therefore
it
is
future-proof
and
downward
Der WI-Manager unterstützt in vollem Umfang die
compatible.von FDT und FDT2 und ist dadurch
Funktionen
zukunftssicher und abwärtskompatibel.
4 Universal network topology
A wide rangeNetzwerk-Topologie
ofBezeichnung
communication protocols are
supported
4 Universelle
Funktion
Typ
with appropriate
DTMs
by the use of our WIKonfigurationsManager. Adapter
Unterschiedlichste
Kommunikationsprotokolle
CBX200
USB
B
Here you can download
adapter
89785
werden durch entsprechende
DTMs imour
WI-Manager
WI-Manager
FDT RahmenSoftware
Downlo
unterstützt. FDT/DTM-software:
anwendung
http://www.weidmueller.com/fdt-dtm
Software
Downlo
Gerätetreiber
orWeidmüller
scan DTM-Library
this QR code
(DTMs)
Let’s connect.
Bezeichnung
Name USB
CBX200
Let’s connect.
Let’s connect.
CBX200 USB
WI-Manager
WI-Manager
Weidmüller DTM-Library
Weidmueller DTM-Library
Funktion
Function
Konfigurationsadapter
Configuration
adapter
FDT
Rahmenanwendung
FDT frame
application
Gerätetreiber
(DTMs)
Device drivers
(DTMs)
Typ
Type
Adapter
Adapter
Software
Software
Software
Software
OrderBest.-Nr.:
No.
8978580000
Order No.:
8978580000
Download-Link
Download link
Bestellnummer: xx
Download-Link
Download link
Bestellnummer: xxxxxx0000
Order number: xxxxxx0000
55
8965340000
8965350000
8965370000
8965380000
8965360000
8965390000
8965400000
8965420000
8965410000
8965470000
8965480000
8965490000
1318220000
8965430000
8965440000
8965450000
8965460000
1176020000
1175990000
1176000000
1176010000
1175980000
1176030000
1176070000
1176080000
1176040000
1176050000
1375450000
1375470000
1334490000
1510370000
1510240000
1510420000
7760054114
7760054115
7760054117
8411190000
8461480000
8461470000
1067250000
1375480000
1375500000
1375510000
1375520000
1435590000
1435610000
8425720000
8483680000
8604420000
8473010000
8473020000
8473000000
8604430000
1481970000
1453210000
7940045760
ACT20P-UI-2RCO-DC-S
1
8260280000
8227350000
MCZ SC 0-10V
MCZ SC 0-20MA
AC/DC Signal measuring transducer
ACT20P-CMT-10-AO-RC-S
ACT20P-CMT-30-AO-RC-S
ACT20P-CMT-60-AO-RC-S
1
1
1510470000
1510540000
1570440000
56
1
1
1
X
RTD
TC
0…5 V
0...10 V
4...20 mA
0...20 mA
Intrinsic-safe signal conditioner for hazardous areas
ACT20X-HDI-SDO-RNO-S
1
ACT20X-HDI-SDO-RNC-S
1
ACT20X-2HDI-2SDO-RNO-S
2
ACT20X-2HDI-2SDO-RNC-S
2
ACT20X-HDI-SDO-S
1
ACT20X-2HDI-2SDO-S
2
ACT20X-SDI-HDO-L-S
1
ACT20X-2SDI-2HDO-S
2
ACT20X-SDI-HDO-H-S
1
ACT20X-HTI-SAO-S
1
X
ACT20X-2HTI-2SAO-S
2
X
ACT20X-HUI-SAO-S
1
X
ACT20X-HUI-SAO-LP-S
1
X
ACT20X-HAI-SAO-S
1
ACT20X-2HAI-2SAO-S
2
ACT20X-SAI-HAO-S
1
ACT20X-2SAI-2HAO-S
2
Signal conditioner in 6 mm width
ACT20M-AI-2SAO-S
1
X
ACT20M-CI-2CO-S
1
X
ACT20M-AI-AO-S
1
X
ACT20M-AI-AO-E-S
1
X
ACT20M-CI-CO-S
1
X
ACT20M-UI-AO-S
1
X
ACT20M-CI-CO-ILP-S
1
X
ACT20M-2CI-2CO-ILP-S
2
X
ACT20M-CI-CO-OLP-S
1
X
ACT20M-2CI-2CO-OLP-S
2
X
ACT20M-BAI-AO-S
1
ACT20M-BAI-2AO-S
1
Network-compatible signal conditioner
ACT20C-AI-AO-MTCP-S
1
X
ACT20C-GTW-100-MTCP-S
1
ACT20C-CMT-10-AO-RC-S
1
ACT20C-CMT-60-AO-RC-S
1
Standard signal isolators
ACT20P-CI-CO
1
X
ACT20P-CI-2CO
1
X
ACT20P-2CI-2CO-12
2
X
MCZ CCC 0-20mA/0-20mA
1
X
Frequency measuring conditioner
MCZ CFC 0-20MA
1
X
MCZ VFC 0-10V
1
Strain gauge transmitter
ACT20P-BRIDGE-S
1
Temperature measuring conditioner
ACT20M-TCI-AO-S
1
ACT20M-TCI-AO-E-S
1
ACT20M-RTI-AO-S
1
ACT20M-RTI-AO-E-S
1
ACT20M-RTCI-CO-OLP-S
1
ACT20M-RTI-CO-EOLP-S
1
MCZ PT100/3 CLP 0...100C
1
MCZ PT100/3 CLP 0...120C
1
MCZ PT100/3 CLP 0...150C
1
MCZ PT100/3 CLP 0...200C
1
MCZ PT100/3 CLP 0...300C
1
MCZ PT100/3 CLP -50C...+150C
1
MCZ PT100/3 CLP -40C...100C
1
Universal measuring conditioner
ACT20P-PRO DCDC II-S
1
X
ACT20P-UI-AO-DO-LP-S
1
X
Measuring and monitoring modules
X
X
X
X
X
X
X
X
X
X
X
X
Miscellaneous
Frequency
Input
Product
Channel
Order No.
Width
Loop powered
Selection chart
Namur initiator
Namur initiator
Namur initiator
Namur initiator
Namur initiator
Namur initiator
NPN PNP signal
NPN PNP signal
NPN PNP signal
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
HART®- transparent
HART®- transparent
HART®- transparent
HART®- transparent
X
X
X
X
X
X
X
-10(20)…+10(20) mA, -5(10)…+5(10) V
-10(20)…+10(20) mA, -5(10)…+5(10) V
X
X
2-/3-wire transmitter
2-/3-wire transmitter
6,1 mm
6,1 mm
6,1 mm
6,1 mm
6,1 mm
6,1 mm
6,1 mm
6,1 mm
6,1 mm
6,1 mm
6,1 mm
6,1 mm
X
22,5 mm
22,5 mm
22,5 mm
22,5 mm
X
X
12,5 mm
12,5 mm
12,5 mm
6 mm
RJ45, Modbus TCP
0…10 A AC/DC
0…60 A AC/DC
X
X
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
12,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
6 mm
6 mm
X
+/-10 mV…+/- 50 mV
22,5 mm
X
X
X
6,1 mm
6,1 mm
6,1 mm
6,1 mm
6,1 mm
6,1 mm
6 mm
6 mm
6 mm
6 mm
6 mm
6 mm
6 mm
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
± 100 mA, ± 300 V
± 25 mA, ± 5 A DC, ± 28 V DC, ± 300 V DC, 300 V AC
X
X
X
X
X
± 25 mA, ± 5 A DC, ± 30 V DC, ± 300 V DC,
potentiometer, Resistor
X
X
22,5 mm
6 mm
6 mm
X
Connection technology: S = Screw / Z = Tension clamb, ILP = Input loop powered, OLP = Output loop powered
12,5 mm
12,5 mm
0…10 A AC/DC
0…30 A AC/DC
0…60 A AC/DC
22,5 mm
22,5 mm
22,5 mm
1
1
2
2
1
2
1
2
1
1
2
1
1
1
2
1
2
Rated voltage Separation
Software
Software
Software
Software
Software
Software
Software
Software
Software
Software
Software
Software
Software
Software
Software
Software
Software
24 V DC
24 V DC
24 V DC
24 V DC
24 V DC
24 V DC
24 V DC
24 V DC
24 V DC
24 V DC
24 V DC
24 V DC
300 V
300 V
300 V
300 V
300 V
300 V
300 V
300 V
300 V
300 V
300 V
300 V
300 V
300 V
300 V
300 V
300 V
3-way
3-way
3-way
3-way
3-way
3-way
3-way
3-way
3-way
3-way
3-way
3-way
2-way
3-way
3-way
3-way
3-way
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
ATEX-appoval
ATEX-appoval
ATEX-appoval
ATEX-appoval
ATEX-appoval
ATEX-appoval
ATEX-appoval
ATEX-appoval, ignition protection group IIC
ATEX-appoval, ignition protection group IIB
ATEX-appoval
ATEX-appoval
ATEX-appoval
ATEX-appoval, Output loop powered
ATEX-appoval, HART®- transparent
ATEX-appoval, HART®- transparent
ATEX-appoval, HART®- transparent
ATEX-appoval, HART®- transparent
X
X
DIP-switch
DIP-switch
DIP-switch
DIP-switch
X
Software
24 V DC
24 V DC
24 V DC
24 V DC
24 V DC
24 V DC
DIP-switch
DIP-switch
24 V DC
24 V DC
300 V
300 V
300 V
300 V
300 V
300 V
300 V
300 V
300 V
300 V
300 V
300 V
3-way
3-way
3-way
3-way
3-way
3-way
2-way
2-way
2-way
2-way
2-way
2-way
S
S
S
S
S
S
S
S
S
S
S
S
ATEX-appoval
ATEX-appoval
ATEX-appoval
ATEX-appoval
ATEX-appoval
ATEX-appoval
ATEX-appoval
ATEX-appoval
ATEX-appoval
ATEX-appoval
ATEX-appoval
ATEX-appoval
Software
Software
Software
24 V DC
24 V DC
24 V DC
24 V DC
300 V
30 V
300 V
300 V
4-way
3-way
3-way
3-way
S
S
S
S
Communication enabled, Ethernet
Modbus TCP Gateway
Through hole current monitor
Through hole current monitor
24 V DC
24 V DC
24 V DC
300 V
300 V
300 V
100 V
3-way
3-way
3-way
2-way
S
S
S
Z
HART®- transparent
HART®- transparent
HART®- transparent
Passive converter ILP
24 V DC
24 V DC
100 V
100 V
2-way
2-way
Z
Z
Frequency output
Frequency output
10...60 V DC
300 V
3-way
S
Relais
Connection
technology
Supply
voltage
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Status relay
Status relay
Status relay
Status relay
Transistor switch, status relay
Transistor switch, status relay
Status relay
Status relay
Status relay
Status relay
Status relay
Status relay, limit switch relay
Status relay
Status relay
Status relay
Status relay
2
2
1
1
1
1
1
2
1
2
1
2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
2 x -10(20)…+10(20) mA
1
0
1
1
X
X
X
Software
X
X
X
X
1
2
2
1
X
X
X
X
X
X
X
X
X
X
X
1
1
±10 V, ±20 mA, limit switch relay
±10 V, ±20 mA, limit switch relay
Frequency: 0...1/ 4/ 8/ 16 kHz
Frequency: 0...1/ 4/ 8/ 16 kHz
1
X
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1
1
X
X
X
X
X
X
1
X
2
2
X
X
1
1
1
X
X
X
X
X
X
Remarks
Configuration
0...10 V
4...20 mA
0...20 mA
Channel
Output
Miscellaneous
X
X
X
X
X
X
24 V DC
24 V DC
24 V DC
24 V DC
0(1)…5 V
0(1)…5 V
0(1)…5 V
0(1)…5 V
20…4 mA
20…4 mA
DIP-switch
DIP-switch
DIP-switch
DIP-switch
DIP-switch
DIP-switch
24 V DC
24 V DC
24 V DC
24 V DC
300 V
300 V
300 V
300 V
300 V
300 V
2-way
2-way
2-way
2-way
2-way
2-way
S
S
S
S
S
S
Z
Z
Z
Z
Z
Z
Z
ATEX-appoval
ATEX-appoval
ATEX-appoval
ATEX-appoval
Passive converter, ATEX-appoval
Passive converter, ATEX-appoval
Passive converter OLP
Passive converter OLP
Passive converter OLP
Passive converter OLP
Passive converter OLP
Passive converter OLP
Passive converter OLP
± 10 V, ± 20 mA
Output loop powered, NPN-output, limit switch relay
Display, DIP-switch
Software
24 V - 230 V AC/DC 600 V
24 V - 230 V AC/DC 300 V
3-way
3-way
S
S
Active or passive output
Output loop powered
24 V - 230 V AC/DC
3-way
S
Software, display
600 V
24 V AC/DC
24 V AC/DC
± 10 V, ± 20 mA, limit switch relay
± 10 V, ± 20 mA, limit switch relay
± 10 V, ± 20 mA, limit switch relay
DIP-switch, potentiometer
DIP-switch, potentiometer
DIP-switch, potentiometer
24 V DC
24 V DC
24 V DC
Z
Z
300 V
300 V
300 V
3-way
3-way
3-way
S
S
S
Through hole current monitor
Through hole current monitor
Through hole current monitor
57
All of your questions
will be answered at any time
Put us to the test. We’re just a phone call away when it
comes to answering your questions. All phone numbers,
addresses and e-mail addresses can be found on the right.
Our trading partners are always on hand to provide you
with assistance and advise. On the Internet you will also
find the addresses of our trading partners.
by phone
by e-mail
Further information
Find out more about our analogue signal converters in
the ACT20 series as well as many other products for
your application.
by Internet
Analogue converters product assistant
www.wmqr.eu/pasc1
Let’s connect.
58
Our complete product offer "Analogue
Signal Conditioning" you can find using
www.weidmueller.de/analogue
or scan the QR code.
Your company is internationally active
We are never far away
AE
United Arab Emirates
AT
Austria
AU
BE
BR
CH
CN
CZ
Weidmuller Middle East FZE
Warehouse Q3-79
SAIF-Zone
P.O. BOX 8591
Sharjah
Tel. +971 65572723
Fax +971 65572724
[email protected]
Weidmüller GmbH
IZ NOE Süd Straße 2b, Obj M 59
2355 Wiener Neudorf
Tel. +43 2236 67080
Fax +43 2236 6708-899
[email protected]
www.weidmueller.com
Australia
Weidmüller Pty. Ltd.
PO BOX 6944
Huntingwood 2148
Huntingwood Drive 43
Huntingwood NSW 2148
Tel. +61 2 9671 9999
Fax +61 2 9671 9911
[email protected]
www.weidmuller.com.au
Belgium
DE
Germany
DK
Denmark
ES
Spain
FI
Weidmüller Benelux B. V.
Mechelsesteenweg 519 bus 6 en 7
1930 Nossegem
Tel. +32 2 752 40 70
Fax +32 2 751 36 06
[email protected]
www.weidmueller.be
Brazil
Weidmuller Conexel do Brasil Conexões Elétricas Ltda.
Av. Presidente Juscelino, 642 - Piraporinha
Diadema, São Paulo
09950-370
Tel. +55 (11) 4366-9600
Fax +55 (11) 4362-1677
[email protected]
www.weidmueller.com.br
Switzerland
FR
GB
Weidmüller Schweiz AG
Rundbuckstraße 2
8212 Neuhausen am Rheinfall SH
Tel. +41 52 674 07 07
Fax +41 52 674 07 08
[email protected]
www.weidmueller.ch
China
Weidmüller Interface (Shanghai) Co. Ltd.
100 Yutong Road
25 F, BM Intercontinental Business Center
200070 Shanghai
Tel. +86 21-22195008
Fax +86 512-68417505
[email protected]
www.weidmueller.com.cn
Czech Republic
Weidmüller s.r.o.
Lomnického 5/1705
140 00 Praha 4
Tel. +420 244 001 400
Fax +420 244 001 499
[email protected]
www.weidmueller.cz
Weidmüller GmbH & Co. KG
Ohmstraße 9
32758 Detmold
Postfach 30 54
32720 Detmold
Tel. +49 5231 1428-0
Fax +49 5231 14-292083
[email protected]
www.weidmueller.de
IT
Italy
RU
Russia
JP
Japan
SE
Sweden
SG
Singapore
TR
Turkey
US
USA
Weidmüller S. r.l.
Via Albert Einstein 4
20092 Cinisello Balsamo Milano
Tel. +39 02 660681
Fax +39 02 6124945
[email protected]
www.weidmuller.it
Weidmüller Danmark
Vallensbækvej 18A
2605 Brøndby
Tel. +45 27747800
[email protected]
www.weidmuller.dk
Weidmüller, S. A.
Narcis Monturiol 11-13, Pol. Ind. Sudoeste
8960 Sant Just Desvern - Barcelona
Tel. +34 934 803 386
Fax +34 933 718 055
[email protected]
www.weidmuller.es
KR
Korea
NL
Netherlands
Finland
Weidmüller Suomi, Weidmüller
Aktiebolagetin sivuliike
Koy Plaza Vivace
Äyritie 8C
FI 1510 Vantaa
Tel. +358 20 7351300
Fax +358 800 114 667
[email protected]
www.weidmuller.fi
France
Weidmüller E. U. R. L.
12, Chaussée Jules César
BP 263 Osny
95523 Cergy-Pontoise Cedex
Tel. +33 1 34 24 55 00
Fax +33 1 34 24 55 01
[email protected]
HK
Hong Kong
HU
Hungary
Weidmuller Korea Co. Ltd.
9th floor, Wonbang B/D
Samseong 2-Dong, GangnamGu
Seoul 143-42
Tel. +82 2-516-0003
Fax +82 2-516-0090
[email protected]
www.weidmuller.co.kr
Weidmüller Benelux B. V.
Franciscusweg 221
1216 SE Hilversum
Postfach 1505
1200 BM Hilversum
Tel. +31 35 626 12 61
Fax +31 35 623 20 44
[email protected]
www.weidmuller.nl
PL
Poland
PT
Portugal
Great Britain
Weidmüller Ltd.
Klippon House
Centurion Court Office Park, Meridian East, Meridian
Business Park
Leicester
LE19 1TP
Tel. +44 116 282 3470
Fax +44 116 289 3582
[email protected]
www.weidmuller.co.uk
Nihon Weidmüller Co. Ltd.
Sphere Tower Tennoz 2-2-8
Higashi-Shinagawa, Shinagawa-ku
Tokyo
140-0002
Tel. +81 3 6711 5300
Fax +81 3 6711 5333
[email protected]
www.weidmuller.co.jp
Weidmüller Sp. z. o. o.
ul. Ogrodowa 58
00-876 Warszawa
Tel. +48 22 510 09 40
Fax +48 22 510 09 41
[email protected]
www.weidmuller.pl
OOO Weidmüller
7/10 Khlebozavodskiy Passage, Moskau
115230
Tel. +7 (495) 771-69-40
Fax +7 (495) 771-69-41
[email protected]
www.weidmueller.ru
Weidmüller AB
Axel Danielssons väg 271
BOX 31025
SE-200 49 Malmö
Tel. +46 77-143 00 44
Fax +46 40-37 48 60
[email protected]
www.weidmuller.se
Weidmüller Pte. Ltd.
70 Bendemeer Road
# 04-03 Luzerne Building
Singapore 339940
Tel. +65 6841 5311
Fax +65 6841 5377
[email protected]
www.weidmuller.com.sg
Weidmüller Elektronik Ticaret Ltd. Sirketi
Kavacik Mah. Orhan Veli Kanik Caddesi 9/1
34810 Beykoz / Istanbul
Tel. +90 (216) 537 10 70
Fax +90 (216) 537 10 77
[email protected]
www.weidmuller.com.tr
W Interconnections Inc.
821 Southlake Boulevard
Richmond Virginia 23236
Tel. +1 (804) 794-2877
Fax +1 (804) 379-2593
[email protected]
www.weidmuller.com
Weidmüller Sistemas de Interface S. A.
Estrada Outeiro Polima, R. Augusto Dias da Silva,
Lote B - Esct. 2
São Domingos de Rana
2785-515 Abóboda
Tel. +351 214 459 191
Fax +351 214 455 871
[email protected]
www.weidmuller.pt
Weidmuller (Hong Kong) Limited Co. Ltd.
Unit 1617, Metropolis Tower
No. 10 Metropolis Drive, Hunghom, Kowloon
Tel. +852 3154 8088
Fax +852 31548099
[email protected]
Weidmüller Kereskedelmi Kft.
Budapest
Gubacsi út 6.
1097
Tel. +36 1 382 7700
Fax +36 1 382 7701
[email protected]
www.weidmueller.hu
Let’s connect.
All Weidmüller addresses and the addresses
of our agencies you can find using
unter: www.weidmueller.com/countries
or scan the QR-code.
59
Weidmüller
Ihr Partner
IndustrialConnectivity
Connectivity
Weidmüller –– Your
partnerder
in Industrial
Alsexperienced
erfahrene Experten
unterstützen
unsere Kunden
und Partner
ganzen
As
experts we
support ourwircustomers
and partners
aroundauf
theder
world
with
solutions
and services
in the industrial
environment
of power,
signal
Welt products,
mit Produkten,
Lösungen
und Services
im industriellen
Umfeld
von Energie,
and
data. und
We are
at home
in their
industries
and markets
and know
the technological
Signalen
Daten.
Wir sind
in ihren
Branchen
und Märkten
zu Hause
und kennen
challenges
of tomorrow.
We are thereforevon
continuously
developing
innovative,
die technologischen
morgen.
So
entwickeln
sustainable
and usefulHerausforderungen
solutions for their individual
needs.
Together wewir
setimmer
standards
wieder
innovative,
nachhaltige
und
wertschöpfende
Lösungen
für
ihre
individuellen
in Industrial Connectivity.
Anforderungen. Gemeinsam setzen wir Maßstäbe in der Industrial Connectivity.
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
32758 Detmold, Germany
T +49 5231 14-0
F +49 5231 14-292083
[email protected]
www.weidmueller.com
Made in Germany
Yourlokalen
local Weidmüller
partner
Ihren
Weidmüller-Ansprechpartner
can be
on our unter:
website:
finden
Siefound
im Internet
www.weidmueller.com/countries
www.weidmueller.com/countries
Order number: 2073780000/07/2015/SMMD