IRF IRHNA8160

PD - 91396C
IRHNA7160
100V, N-CHANNEL
RADIATION HARDENED
POWER MOSFET
SURFACE MOUNT (SMD-2)
REF: MIL-PRF-19500/664
®
™
RAD-Hard HEXFET
MOSFET TECHNOLOGY
Product Summary
Part Number Radiation Level
IRHNA7160 100K Rads (Si)
IRHNA3160 300K Rads (Si)
RDS(on)
0.04Ω
0.04Ω
ID
51A
51A
QPL Part Number
JANSR2N7432U
JANSF2N7432U
IRHNA4160
0.04Ω
51A
JANSG2N7432U
0.04Ω
51A
JANSH2N7432U
600K Rads (Si)
IRHNA8160 1000K Rads (Si)
International Rectifier’s RADHard HEXFET® technology provides high performance power MOSFETs for
space applications. This technology has over a decade of proven performance and reliability in satellite
applications. These devices have been characterized for both Total Dose and Single Event Effects (SEE).
The combination of low Rdson and low gate charge
reduces the power losses in switching applications
such as DC to DC converters and motor control. These
devices retain all of the well established advantages
of MOSFETs such as voltage control, fast switching,
ease of paralleling and temperature stability of electrical parameters.
SMD - 2
Features:
n
n
n
n
n
n
n
n
n
Single Event Effect (SEE) Hardened
Low RDS(on)
Low Total Gate Charge
Proton Tolerant
Simple Drive Requirements
Ease of Paralleling
Hermetically Sealed
Surface Mount
Light Weight
Absolute Maximum Ratings
Pre-Irradiation
Parameter
ID @ VGS = 12V, TC = 25°C
ID @ VGS = 12V, TC = 100°C
IDM
PD @ TC = 25°C
VGS
EAS
IAR
EAR
dv/dt
TJ
T STG
Continuous Drain Current
Continuous Drain Current
Pulsed Drain Current ➀
Max. Power Dissipation
Linear Derating Factor
Gate-to-Source Voltage
Single Pulse Avalanche Energy ➁
Avalanche Current ➀
Repetitive Avalanche Energy ➀
Peak Diode Recovery dv/dt ➂
Operating Junction
Storage Temperature Range
Pckg. Mounting Surface Temp.
Weight
Units
51
32.5
204
300
2.4
±20
500
51
30
7.3
-55 to 150
A
W
W/°C
V
mJ
A
mJ
V/ns
o
300 ( for 5s)
3.3 (Typical)
C
g
For footnotes refer to the last page
www.irf.com
1
5/4/2000
IRHNA7160
Pre-Irradiation
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter
Min
Typ Max Units
BVDSS
Drain-to-Source Breakdown Voltage
∆BV DSS/∆T J Temperature Coefficient of Breakdown
Voltage
RDS(on)
Static Drain-to-Source
On-State Resistance
VGS(th)
Gate Threshold Voltage
gfs
Forward Transconductance
IDSS
Zero Gate Voltage Drain Current
100
—
—
V
—
0.11
—
V/°C
—
—
2.0
16
—
—
—
—
—
—
—
—
0.040
Ω
0.045
4.0
V
—
S( )
25
µA
250
IGSS
IGSS
Qg
Q gs
Q gd
td(on)
tr
td(off)
tf
LS + LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
4.0
100
-100
310
53
110
35
150
150
200
—
Ciss
C oss
C rss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
—
—
—
5300
1600
350
—
—
—
Test Conditions
VGS =0 V, ID = 1.0mA
Reference to 25°C, ID = 1.0mA
VGS = 12V, ID = 32.5A
„
VGS = 12V, ID = 51A
VDS = VGS, ID = 1.0mA
VDS > 15V, IDS = 32.5A „
VDS= 80V,VGS=0V
VDS = 80V
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS = 12V, ID = 51A
VDS = 50V
Ω
nA
nC
VDD = 50V, ID = 51A,
RG = 2.35Ω
ns
nH
Measured from center of drain
pad to center of source pad
VGS = 0V, VDS = 25V
f = 1.0MHz
pF
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS
ISM
VSD
t rr
Q RR
Continuous Source Current (Body Diode)
Pulse Source Current (Body Diode) ➀
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
ton
Forward Turn-On Time
—
—
—
—
—
—
—
—
—
—
51
204
1.8
520
6.5
Test Conditions
A
V
nS
µC
Tj = 25°C, IS = 51A, VGS = 0V ➃
Tj = 25°C, IF = 51A, di/dt ≥ 100A/µs
VDD ≤ 25V ➃
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJPCB
Junction-to-Case
Junction-to-PC Board
Min Typ Max Units
—
—
—
1.6
0.42
—
°C/W
Test Conditions
Solder to a 1” sq. copper clad PC Board
Note: Corresponding Spice and Saber models are available on the G&S Website.
For footnotes refer to the last page
2
www.irf.com
Radiation Characteristics
Pre-Irradiation
IRHNA7160
International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability.
The hardness assurance program at International Rectifier is comprised of two radiation environments.
Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both
pre- and post-irradiation performance are tested and specified using the same drive circuitry and test
conditions in order to provide a direct comparison.
Table 1. Electrical Characteristics @ Tj = 25°C, Post Total Dose Irradiation ➄➅
Parameter
BVDSS
VGS(th)
IGSS
IGSS
IDSS
RDS(on)
RDS(on)
VSD
100K Rads(Si)1
Drain-to-Source Breakdown Voltage
Gate Threshold Voltage ➃
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Zero Gate Voltage Drain Current
Static Drain-to-Source ➃
On-State Resistance (TO-3)
Static Drain-to-Source ➃
On-State Resistance (SMD-2)
Diode Forward Voltage ➃
600 to 1000K Rads (Si)2
Test Conditions
Units
Min
Max
Min
Max
100
2.0
—
—
—
—
—
4.0
100
-100
25
0.045
100
1.25
—
—
—
—
—
4.5
100
-100
50
0.062
µA
Ω
—
0.04
—
0.057
Ω
VGS = 12V, ID =32.5A
—
1.8
—
1.8
V
VGS = 0V, IS = 51A
VGS = 0V, ID = 1.0mA
VGS = VDS, ID = 1.0mA
VGS = 20V
VGS = -20 V
VDS=80V, VGS =0V
VGS = 12V, ID =32.5A
V
nA
1. Part number IRHNA7160 (JANSR2N7432U)
2. Part numbers IRHNA3160 (JANSF2N7432U), IRHNA4160 (JANSG2N7432U) and IRHNA8160 (JANSH2N7432U)
International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for
Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2.
Ion
Cu
Br
LET
MeV/(mg/cm2))
28
36.8
Energy
(MeV)
285
305
VDS(V)
Range
(µm) @VGS=0V @VGS=-5V @VGS=-10V @VGS=-15V @VGS=-20V
43
100
100
100
80
60
39
100
90
70
50
—
120
100
VDS
80
Cu
Br
60
40
20
0
0
-5
-10
-15
-20
-25
VGS
Fig a. Single Event Effect, Safe Operating Area
For footnotes refer to the last page
www.irf.com
3
IRHNA7160
Pre-Irradiation
1000
1000
VGS
15V
12V
10V
9.0V
8.0V
7.0V
6.0V
BOTTOM 5.0V
I D , Drain-to-Source Current (A)
I D , Drain-to-Source Current (A)
100
100
10
5.0V
20µs PULSE WIDTH
TJ = 25 °C
1
0.1
1
10
10
100
1
R DS(on) , Drain-to-Source On Resistance
(Normalized)
3.0
TJ = 25 ° C
100
TJ = 150 ° C
10
V DS = 50V
20µs PULSE WIDTH
6
7
8
9
10
11
VGS , Gate-to-Source Voltage (V)
Fig 3. Typical Transfer Characteristics
4
100
Fig 2. Typical Output Characteristics
1000
5
10
VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
1
20µs PULSE WIDTH
TJ = 150 °C
5.0V
VDS , Drain-to-Source Voltage (V)
I D , Drain-to-Source Current (A)
VGS
15V
12V
10V
9.0V
8.0V
7.0V
6.0V
BOTTOM 5.0V
TOP
TOP
12
ID = 51A
2.5
2.0
1.5
1.0
0.5
0.0
-60 -40 -20
VGS = 12V
0
20
40
60
80 100 120 140 160
TJ , Junction Temperature( °C)
Fig 4. Normalized On-Resistance
Vs. Temperature
www.irf.com
Pre-Irradiation
VGS = 0V,
f = 1MHz
Ciss = Cgs + Cgd , Cds SHORTED
Crss = Cgd
Coss = Cds + Cgd
C, Capacitance (pF)
8000
6000
Ciss
4000
Coss
2000
20
VGS , Gate-to-Source Voltage (V)
10000
IRHNA7160
ID = 51A
VDS = 80V
VDS = 50V
VDS = 20V
16
12
8
4
Crss
0
FOR TEST CIRCUIT
SEE FIGURE 13
0
1
10
100
0
VDS , Drain-to-Source Voltage (V)
80
120
160
200
240
280
Q G , Total Gate Charge (nC)
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
1000
1000
OPERATION IN THIS AREA LIMITED
BY RDS(on)
I D , Drain Current (A)
ISD , Reverse Drain Current (A)
40
100
100
TJ = 150 ° C
10
100us
1ms
10
10ms
TJ = 25 ° C
1
0.0
V GS = 0 V
0.5
1.0
1.5
2.0
2.5
3.0
VSD ,Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode
Forward Voltage
www.irf.com
3.5
TC = 25 ° C
TJ = 150 ° C
Single Pulse
1
1
10
100
1000
VDS , Drain-to-Source Voltage (V)
Fig 8. Maximum Safe Operating Area
5
IRHNA7160
Pre-Irradiation
60
RD
VDS
50
VGS
D.U.T.
I D , Drain Current (A)
RG
+
-VDD
40
12V
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
30
20
Fig 10a. Switching Time Test Circuit
VDS
10
90%
0
25
50
75
100
125
150
TC , Case Temperature ( ° C)
10%
VGS
Fig 9. Maximum Drain Current Vs.
Case Temperature
td(on)
tr
t d(off)
tf
Fig 10b. Switching Time Waveforms
Thermal Response (Z thJC )
1
D = 0.50
0.1
0.01
0.001
0.00001
0.20
0.10
0.05
0.02
0.01
P DM
SINGLE PULSE
(THERMAL RESPONSE)
t1
t2
Notes:
1. Duty factor D = t 1 / t 2
2. Peak TJ = P DM x Z thJC + TC
0.0001
0.001
0.01
0.1
1
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
6
www.irf.com
Pre-Irradiation
IRHNA7160
L
D .U .T
RG
IA S
12V
20V
D R IV E R
+
- VD D
0 .0 1 Ω
tp
TOP
1000
1 5V
VD S
EAS , Single Pulse Avalanche Energy (mJ)
1200
Fig 12a. Unclamped Inductive Test Circuit
A
BOTTOM
800
600
400
200
0
25
V (B R )D S S
ID
23A
32A
51A
50
75
100
125
150
Starting TJ , Junction Temperature( °C)
tp
Fig 12c. Maximum Avalanche Energy
Vs. Drain Current
IAS
Current Regulator
Same Type as D.U.T.
Fig 12b. Unclamped Inductive Waveforms
50KΩ
QG
12V
.2µF
.3µF
12 V
QGS
QGD
+
V
- DS
VGS
VG
3mA
Charge
Fig 13a. Basic Gate Charge Waveform
www.irf.com
D.U.T.
IG
ID
Current Sampling Resistors
Fig 13b. Gate Charge Test Circuit
7
IRHNA7160
Pre-Irradiation
Foot Notes:
➀ Repetitive Rating; Pulse width limited by
maximum junction temperature.
➁ VDD = 25V, starting TJ = 25°C, L= 0.38mH
Peak IL = 51A, VGS = 12V
➂ ISD ≤51A, di/dt ≤ 410A/µs,
VDD ≤ 100V, TJ ≤ 150°C
➃ Pulse width ≤ 300 µs; Duty Cycle ≤ 2%
➄ Total Dose Irradiation with VGS Bias.
12 volt VGS applied and VDS = 0 during
irradiation per MIL-STD-750, method 1019, condition A.
➅ Total Dose Irradiation with VDS Bias.
80 volt VDS applied and VGS = 0 during
irradiation per MlL-STD-750, method 1019, condition A.
Case Outline and Dimensions — SMD-2
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
IR EUROPEAN REGIONAL CENTRE: 439/445 Godstone Rd, Whyteleafe, Surrey CR3 OBL, UK Tel: ++ 44 (0)20 8645 8000
IR CANADA: 15 Lincoln Court, Brampton, Ontario L6T3Z2, Tel: (905) 453 2200
IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg Tel: ++ 49 (0) 6172 96590
IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: ++ 39 011 451 0111
IR JAPAN: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo 171 Tel: 81 (0)3 3983 0086
IR SOUTHEAST ASIA: 1 Kim Seng Promenade, Great World City West Tower, 13-11, Singapore 237994 Tel: ++ 65 (0)838 4630
IR TAIWAN:16 Fl. Suite D. 207, Sec. 2, Tun Haw South Road, Taipei, 10673 Tel: 886-(0)2 2377 9936
Data and specifications subject to change without notice. 5/00
8
www.irf.com