PD -97551 AUTOMOTIVE GRADE • Advanced Process Technology • Optimized for Class D Audio Amplifier and High Speed • • • • • • • • • Switching Applications Low Rds(on) for Improved Efficiency Low Qg for Better THD and Improved Efficiency Low Qrr for Better THD and Lower EMI Low Parasitic Inductance for Reduced Ringing and Lower EMI Delivers up to 100W per Channel into an 8Ω Load Dual Sided Cooling 175°C Operating Temperature Repetitive Avalanche Capability for Robustness and Reliability Lead free, RoHS and Halogen free SC M2 DirectFET Power MOSFET V(BR)DSS 60V RDS(on) typ. 27m M4 : 36m: 3.5: max. RG (typical) Qg (typical) 7.3nC DirectFET ISOMETRIC SB Applicable DirectFET Outline and Substrate Outline SB AUIRF7640S2TR AUIRF7640S2TR1 L4 L6 L8 Description The AUIRF7640S2TR/TR1 combines the latest Automotive HEXFET® Power MOSFET Silicon technology with the advanced DirectFET packaging platform to produce a best in class part for Automotive Class D audio amplifier applications. The DirectFET package is compatible with existing layout geometries used in power applications, PCB assembly equipment and vapor phase, infra-red or convection soldering techniques, when application note AN-1035 is followed regarding the manufacturing methods and processes. The DirectFET package allows dual sided cooling to maximize thermal transfer in automotive power systems. This HEXFET Power MOSFET optimizes gate charge, body diode reverse recovery and internal gate resistance to improve key Class D audio amplifier performance factors such as efficiency, THD and EMI. Moreover the DirectFET packaging platform offers low parasitic inductance and resistance when compared to conventional wire bonded SOIC packages which improves EMI performance by reducing the voltage ringing that accompanies current transients. These features combine to make this MOSFET a highly desirable component in Automotive Class D audio amplifier and other high speed switching systems. Absolute Maximum Ratings Max. Parameter VDS VGS ID @ TC = 25°C ID @ TC = 100°C ID @ TA = 25°C ID @ TC = 25°C Drain-to-Source Voltage Gate-to-Source Voltage Continuous Drain Current, VGS @ 10V (Silicon Limited)f Continuous Drain Current, VGS @ 10V (Silicon Limited)f Continuous Drain Current, VGS @ 10V (Silicon Limited)e Continuous Drain Current, VGS @ 10V (Package Limited) IDM PD @TC = 25°C PD @TA = 25°C EAS EAS (tested) IAR EAR Pulsed Drain Current Power Dissipation Power Dissipation Single Pulse Avalanche Energy (Thermally Limited) Single Pulse Avalanche Energy Tested Value Avalanche Current Repetitive Avalanche Energy Peak Soldering Temperature Operating Junction and Storage Temperature Range TP TJ TSTG f e f g c c Units 60 ± 20 21 15 5.8 77 84 30 2.4 38 57 d V A W mJ See Fig.18a, 18b, 15, 16 270 -55 to + 175 A mJ °C Thermal Resistance e j k Parameter RθJA Junction-to-Ambient RθJA Junction-to-Ambient RθJA Junction-to-Ambient RθJ-Can Junction-to-Can RθJ-PCB Junction-to-PCB Mounted fl Linear Derating Factor fl Typ. Max. ––– 63 12.5 ––– 20 ––– ––– 5.0 1.4 Units °C/W ––– 0.2 W/°C HEXFET® is a registered trademark of International Rectifier. www.irf.com 1 8/16/10 AUIRF7640S2TR/TR1 Static @ TJ = 25°C (unless otherwise specified) Parameter BVDSS ΔΒVDSS/ΔTJ RDS(on) VGS(th) ΔVGS(th)/ΔTJ gfs RG IDSS Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient Static Drain-to-Source On-Resistance Gate Threshold Voltage Gate Threshold Voltage Coefficient Forward Transconductance Gate Resistance Drain-to-Source Leakage Current IGSS Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Min. Typ. Max. Units 60 ––– ––– 3.0 ––– 9.3 ––– 0.1 27 4.0 -11 ––– 3.5 ––– ––– ––– ––– ––– ––– ––– ––– ––– Conditions VGS = 0V, ID = 250μA ––– V ––– V/°C Reference to 25°C, ID = 1mA 36 mΩ VGS = 10V, ID = 13A VDS = VGS, ID = 25μA 5.0 V ––– mV/°C VDS = 50V, ID = 13A ––– S 5.0 Ω 5 μA VDS = 60V, VGS = 0V VDS = 48V, VGS = 0V, TJ = 125°C 250 V 100 nA GS = 20V VGS = -20V -100 i Dynamic Characteristics @ TJ = 25°C (unless otherwise stated) Qg Qgs1 Qgs2 Qgd Qgodr Qsw Qoss td(on) tr td(off) tf Ciss Coss Crss Coss Coss Total Gate Charge Pre-Vth Gate-to-Source Charge Post-Vth Gate-to-Source Charge Gate-to-Drain Charge Gate Charge Overdrive Switch Charge (Qgs2 + Qgd) Output Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Output Capacitance Output Capacitance ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– 7.3 1.5 0.9 3.0 1.9 3.9 5.3 4.0 12 6.3 6.2 450 160 48 610 120 11 ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– nC VDS = 30V VGS = 10V ID = 13A See Fig. 6 and 17 ns VDS = 16V, VGS = 0V VDD = 30V, VGS = 10V ID = 13A RG=6.8Ω pF VGS = 0V VDS = 25V nC i ƒ = 1.0MHz VGS = 0V, VDS = 1.0V, f=1.0MHz VGS = 0V, VDS = 48V, f=1.0MHz Diode Characteristics @ TJ = 25°C (unless otherwise stated) Parameter IS ISM VSD trr Qrr Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge g Surface mounted on 1 in. square Cu (still air). Min. Typ. Max. Units ––– ––– 21 ––– ––– 84 ––– ––– ––– ––– 26 24 1.3 39 36 Mounted to a PCB with small clip heatsink (still air) A V ns nC Conditions MOSFET symbol showing the G integral reverse p-n junction diode. TJ = 25°C, IS = 13A, VGS = 0V TJ = 25°C, IF = 13A, VDD = 25V i di/dt = 100A/μs D S i Mounted on minimum footprint full size board with metalized back and with small clip heatsink (still air) Notes through are on page 3 2 www.irf.com AUIRF7640S2TR/TR1 Qualification Information† Automotive (per AEC-Q101) Qualification Level †† Comments: This part number(s) passed Automotive qualification. IR’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level. Moisture Sensitivity Level Machine Model DFET2 MSL1 Class B AEC-Q101-002 ESD Human Body Model Class 2 AEC-Q101-001 Charged Device Model Class IV AEC-Q101-005 Yes RoHS Compliant Qualification standards can be found at International Rectifiers web site: http://www.irf.com Exceptions to AEC-Q101 requirements are noted in the qualification report. Notes: Click on this section to link to the appropriate technical paper. Click on this section to link to the DirectFET Website. Surface mounted on 1 in. square Cu board, steady state. TC measured with thermocouple mounted to top (Drain) of part. Repetitive rating; pulse width limited by max. junction temperature. www.irf.com Starting TJ = 25°C, L = 0.944mH, RG = 25Ω, IAS = 8.9A. Pulse width ≤ 400μs; duty cycle ≤ 2%. Used double sided cooling, mounting pad with large heatsink. Mounted on minimum footprint full size board with metalized back and with small clip heatsink. Rθ is measured at TJ of approximately 90°C. 3 AUIRF7640S2TR/TR1 100 100 10 BOTTOM 1 TOP ID, Drain-to-Source Current (A) ID, Drain-to-Source Current (A) TOP VGS 15V 10V 8.0V 7.0V 6.5V 6.0V 5.5V 5.0V 0.1 0.01 5.0V 10 BOTTOM VGS 15V 10V 8.0V 7.0V 6.5V 6.0V 5.5V 5.0V 1 5.0V ≤60μs PULSE WIDTH ≤60μs PULSE WIDTH Tj = 25°C Tj = 175°C 0.001 0.1 0.1 1 10 100 0.1 VDS, Drain-to-Source Voltage (V) 100 ID = 13A 80 60 TJ = 125°C 20 TJ = 25°C 0 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Fig 3. Typical On-Resistance vs. Gate Voltage 100 Vgs = 10V 80 TJ = 125°C 60 TJ = 25°C 40 20 0 10 20 30 40 50 Fig 4. Typical On-Resistance vs. Drain Current 100 2.5 RDS(on) , Drain-to-Source On Resistance (Normalized) ID, Drain-to-Source Current(A) 100 ID, Drain Current (A) VGS, Gate -to -Source Voltage (V) 10 1 TJ = -40°C TJ = 25°C TJ = 175°C 0.1 VDS = 25V ≤60μs PULSE WIDTH 0.01 ID = 13A VGS = 10V 2.0 1.5 1.0 0.5 2 4 6 8 10 12 VGS, Gate-to-Source Voltage (V) Fig 5. Typical Transfer Characteristics 4 10 Fig 2. Typical Output Characteristics ( Ω) RDS(on), Drain-to -Source On Resistance m RDS(on), Drain-to -Source On Resistance (mΩ) Fig 1. Typical Output Characteristics 40 1 VDS, Drain-to-Source Voltage (V) 14 -60 -40 -20 0 20 40 60 80 100120140160180 TJ , Junction Temperature (°C) Fig 6. Normalized On-Resistance vs. Temperature www.irf.com AUIRF7640S2TR/TR1 100 5.5 4.5 3.5 ID = 25μA ID = 250μA ID = 1.0mA D = 1.0A 2.5 TJ = -40°C TJ = 25°C TJ = 175°C ISD, Reverse Drain Current (A) VGS(th), Gate threshold Voltage (V) 6.5 10 1 VGS = 0V 0.1 1.5 -75 -50 -25 0 0.2 25 50 75 100 125 150 175 Fig 7. Typical Threshold Voltage vs. Junction Temperature 10000 1.0 1.2 VGS = 0V, f = 1 MHZ Ciss = Cgs + Cgd, Cds SHORTED Crss = Cgd TJ = 25°C 14 Coss = Cds + Cgd C, Capacitance (pF) Gfs , Forward Transconductance (S) 0.8 Fig 8. Typical Source-Drain Diode Forward Voltage 18 12 TJ = 175°C 10 8 6 1000 Ciss Coss 100 Crss 4 VDS = 5.0V 2 380μs PULSE WIDTH 10 0 0 4 8 12 16 20 1 24 10 100 VDS, Drain-to-Source Voltage (V) ID,Drain-to-Source Current (A) Fig 10. Typical Capacitance vs.Drain-to-Source Voltage Fig 9. Typical Forward Transconductance Vs. Drain Current 24 14 ID= 13A 12 VDS= 80V 20 VDS= 50V VDS= 20V ID, Drain Current (A) VGS, Gate-to-Source Voltage (V) 0.6 VSD , Source-to-Drain Voltage (V) TJ , Temperature ( °C ) 16 0.4 10 8 6 4 16 12 8 4 2 0 0 0 2 4 6 8 10 QG, Total Gate Charge (nC) Fig.11 Typical Gate Charge vs.Gate-to-Source Voltage www.irf.com 25 50 75 100 125 150 175 TC , Case Temperature (°C) Fig 12. Maximum Drain Current vs. Case Temperature 5 ID, Drain-to-Source Current (A) 1000 EAS , Single Pulse Avalanche Energy (mJ) AUIRF7640S2TR/TR1 OPERATION IN THIS AREA LIMITED BY R DS(on) 100 1msec 100μsec 10 1 DC Tc = 25°C Tj = 175°C Single Pulse 10msec 160 1 10 TOP 120 100 80 60 40 20 0.1 0 ID 2.5A 4.8A BOTTOM 13A 140 0 100 25 VDS , Drain-toSource Voltage (V) 50 75 100 125 150 175 Starting TJ , Junction Temperature (°C) Fig 13. Maximum Safe Operating Area Fig 14. Maximum Avalanche Energy vs. Temperature Thermal Response ( Z thJC ) °C/W 10 D = 0.50 1 0.20 0.10 0.05 0.02 0.01 0.1 τJ 0.01 SINGLE PULSE ( THERMAL RESPONSE ) 0.001 1E-006 1E-005 R1 R1 τJ τ1 R2 R2 R3 R3 Ri (°C/W) R4 R4 τC τ2 τ1 τ2 τ3 τ3 Ci= τi/Ri Ci i/Ri 0.0001 τ4 τ4 τ τi (sec) 0.49687 0.000119 0.00517 8.231486 2.55852 0.018926 1.94004 0.002741 Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc 0.001 0.01 0.1 t1 , Rectangular Pulse Duration (sec) Fig 15. Maximum Effective Transient Thermal Impedance, Junction-to-Case 100 Allowed avalanche Current vs avalanche pulsewidth, tav, assuming ΔTj = 150°C and Tstart =25°C (Single Pulse) Avalanche Current (A) Duty Cycle = Single Pulse 10 0.01 0.05 0.10 1 Allowed avalanche Current vs avalanche pulsewidth, tav, assuming ΔΤ j = 25°C and Tstart = 150°C. 0.1 1.0E-06 1.0E-05 1.0E-04 1.0E-03 1.0E-02 1.0E-01 tav (sec) Fig 16. Typical Avalanche Current Vs.Pulsewidth 6 www.irf.com AUIRF7640S2TR/TR1 EAR , Avalanche Energy (mJ) 40 TOP Single Pulse BOTTOM 1% Duty Cycle ID = 13A 30 20 10 0 25 50 75 100 125 150 175 Starting TJ , Junction Temperature (°C) Notes on Repetitive Avalanche Curves , Figures 16, 17: (For further info, see AN-1005 at www.irf.com) 1. Avalanche failures assumption: Purely a thermal phenomenon and failure occurs at a temperature far in excess of Tjmax. This is validated for every part type. 2. Safe operation in Avalanche is allowed as long asTjmax is not exceeded. 3. Equation below based on circuit and waveforms shown in Figures 18a, 18b. 4. PD (ave) = Average power dissipation per single avalanche pulse. 5. BV = Rated breakdown voltage (1.3 factor accounts for voltage increase during avalanche). 6. Iav = Allowable avalanche current. 7. ΔT = Allowable rise in junction temperature, not to exceed Tjmax (assumed as 25°C in Figure 16, 17). tav = Average time in avalanche. D = Duty cycle in avalanche = tav ·f ZthJC(D, tav) = Transient thermal resistance, see figure 11) PD (ave) = 1/2 ( 1.3·BV·Iav) = DT/ ZthJC Iav = 2DT/ [1.3·BV·Zth] EAS (AR) = PD (ave)·tav Fig 17. Maximum Avalanche Energy Vs. Temperature V(BR)DSS 15V tp DRIVER L VDS D.U.T RG VGS 20V + - VDD IAS tp A 0.01Ω I AS Fig 18a. Unclamped Inductive Test Circuit Fig 18b. Unclamped Inductive Waveforms Id Vds L VCC DUT 0 20K 1K Vgs S Vgs(th) Fig 19a. Gate Charge Test Circuit VDS VGS RG Qgodr RD Qgd Qgs2 Qgs1 Fig 19b. Gate Charge Waveform D.U.T. VDS + - V DD 90% 10V Pulse Width ≤ 1 µs Duty Factor ≤ 0.1 % 10% VGS td(on) Fig 20a. Switching Time Test Circuit www.irf.com tr t d(off) tf Fig 20b. Switching Time Waveforms 7 AUIRF7640S2TR/TR1 DirectFET Auto Board Footprint, SB (Small Size Can). Please see AN-1035 for DirectFET assembly details and stencil and substrate design recommendations CL G = GATE D = DRAIN S = SOURCE D D G D 8 S D www.irf.com AUIRF7640S2TR/TR1 DirectFET Auto Outline Dimension, SB Outline (Small Size Can). Please see AN-1035 for DirectFET assembly details and stencil and substrate design recommendations DIMENSIONS CODE A B C D E F G H J K L M P R METRIC MIN MAX 4.75 4.85 3.70 3.95 2.75 2.85 0.35 0.45 0.48 0.52 0.88 0.92 0.98 1.02 0.88 0.92 N/A N/A 0.95 1.05 1.85 1.95 0.68 0.74 0.08 0.17 0.02 0.08 IMPERIAL MIN MAX 0.187 0.191 0.146 0.156 0.108 0.112 0.014 0.018 0.019 0.020 0.035 0.036 0.039 0.040 0.035 0.036 N/A N/A 0.037 0.041 0.073 0.077 0.027 0.029 0.003 0.007 0.001 0.003 DirectFET Part Marking "AU" = GATE AND AUTOMOTIVE MARKING LOGO PART NUMBER BATCH NUMBER DATE CODE Line above the last character of the date code indicates "Lead-Free" www.irf.com 9 AUIRF7640S2TR/TR1 Automotive DirectFET Tape & Reel Dimension (Showing component orientation). F A B E C D G H NOTE: Controlling dimensions in mm Std reel quantity is 4800 parts. (ordered as AUIRF7640S2TR). For 1000 parts on 7" reel, order AUIRF7640S2TR1 REEL DIMENSIONS STANDARD OPTION (QTY 4800) TR1 OPTION (QTY 1000) IMPERIAL IMPERIAL METRIC METRIC CODE MIN MIN MAX MIN MIN MAX MAX MAX 12.992 6.9 A N.C 177.77 N.C 330.0 N.C N.C 0.795 0.75 B N.C 19.06 20.2 N.C N.C N.C C 0.504 0.53 0.50 13.5 12.8 0.520 13.2 12.8 D 0.059 0.059 N.C 1.5 1.5 N.C N.C N.C E 3.937 2.31 N.C 58.72 100.0 N.C N.C N.C F N.C N.C 0.53 N.C N.C 0.724 18.4 13.50 G 0.488 0.47 11.9 N.C 12.4 0.567 14.4 12.01 H 0.469 0.47 11.9 N.C 11.9 0.606 15.4 12.01 LOADED TAPE FEED DIRECTION A H F C D B E NOTE: CONTROLLING DIMENSIONS IN MM 10 CODE A B C D E F G H G DIMENSIONS IMPERIAL METRIC MIN MIN MAX MAX 0.311 0.319 8.10 7.90 0.154 4.10 3.90 0.161 0.469 0.484 12.30 11.90 0.215 5.55 5.45 0.219 0.158 4.00 0.165 4.20 0.205 0.197 5.20 5.00 0.059 1.50 N.C N.C 0.059 1.50 0.063 1.60 www.irf.com AUIRF7640S2TR/TR1 IMPORTANT NOTICE Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries (IR) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. Part numbers designated with the “AU” prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment. IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using IR components. To minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards. Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements. IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product. IR products are neither designed nor intended for use in military/aerospace applications or environments unless the IR products are specifically designated by IR as military-grade or “enhanced plastic.” Only products designated by IR as military-grade meet military specifications. Buyers acknowledge and agree that any such use of IR products which IR has not designated as military-grade is solely at the Buyer’s risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements For technical support, please contact IR’s Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 www.irf.com 11