2SD2662 Transistors Low frequency amplifier 2SD2662 zDimensions (Unit : mm) zApplication Low frequency amplifier Driver zFeatures 1) A collector current is large. 2) VCE(sat) ≦ 350mV At IC = 1A / IB = 50mA (1)Base (2)Collector (3)Emitter ROHM : MPT3 JEITA : SC-62 JEDEC: SOT-89 Abbreviated symbol : FZ zPackaging specifications zAbsolute maximum ratings (Ta=25°C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Symbol VCBO VCEO VEBO IC ICP Power dissipation PC Junction temperature Range of storage temperature tj tstg Limits 30 30 6 1.5 3 500 2 ∗2 150 −55 to +150 Unit V V V A A∗1 mW W °C °C Package Type Taping Code T100 Basic ordering unit (pieces) 1000 2SD2662 ∗1 Single pulse, PW=1ms ∗2 Mounted on a 40×40× t 0.7mm Ceramic substrate zElectrical characteristics (Ta=25°C) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cut off current Emitter cut off current Collector-emitter saturation voltage DC current gain Transition frequency Corrector output capacitance Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT Cob Min. 30 30 6 − − − 270 − − Typ. − − − − − 160 − 330 11 Max. − − − 100 100 350 680 − − Unit V V V nA nA mV − MHz pF Conditions IC=10µA IC=1mA IE=10µA VCB=30V VEB=6V IC=1A, IB=50mA VCE=2V, IC=100mA ∗ VCE=2V, IE=−100mA, f=100MHz ∗ VCB=10V, IE=0A, f=1MHz ∗ Pulsed Rev.B 1/2 2SD2662 Transistors Ta=100°C 0.1 Ta=25°C Ta=−40°C 0.01 0.001 0 0.5 1 Ta=25°C Ta=−40°C 100 10 0.001 1.5 Ta=−40°C Ta=25°C Ta=100°C 1 0.1 Ta=100°C VCE(sat) Ta=25°C Ta=−40°C 0.01 0.1 1 10 Fig.4 Collector-emitter saturation voltage base-emitter saturation voltage vs. collector current 0.1 1 Fig.5 Gain bandwidth product vs. emitter current Ta=25°C Pulsed 0.1 IC/IB=50/1 IC/IB=20/1 IC/IB=10/1 0.01 0.001 0.01 0.1 1 10 COLLECTOR CURRENT : IC (A) Fig.3 Collector-emitter saturation voltage vs. collector current 100 10 0.01 1 10 1000 Ta=25°C IC=0A f=1MHz Cib 100 Cob 10 1 0.1 1 10 100 EMITTER TO BASE VOLTAGE : VEB(V) COLLECTOR TO BASE VOLTAGE : VCB(V) Fig.6 Collector output capacitance vs. collector-base voltage Emitter input capacitance vs. emitter-base voltage Ta=25°C VCE=5V f=100MHz tstg SWITCHING TIME : (ns) 10 Ta=25°C VCE=2V f=100MHz EMITTER CURRENT : IE (A) COLLECTOR CURRENT : IC (A) 1000 1 1000 TRANSITION FREQUENCY : fT (MHz) BASE SATURATION VOLTAGE : VBE (sat) (V) COLLECTOR SATURATION VOLTAGE : VCE (sat) (V) =20/1 ICC/IBB=20 Pulsed VBE(sat) 0.1 Fig.2 DC current gain vs. collector current Fig.1 Grounded emitter propagation characteristics 10 0.01 COLLECTOR CURRENT : IC (A) BASE TO EMITTER CURRENT : VBE (V) 0.01 0.001 VCE=2V Pulsed Ta=100°C EMITTER INPUT CAPACITANCE : Cib (pF) COLLECTOR OUTPUT CAPACITANCE : Cob (pF) 1000 VCE=2V Pulsed DC CURRENT GAIN : hFE COLLECTOR CURRENT : IC (A) 1 COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) zElectrical characteristic curves 100 tf tdon 10 tr 1 0.01 0.1 1 10 COLLECTOR CURRENT : IC (A) Fig.7 Switching time Rev.B 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0