SSTA06 / MMSTA06 Transistors NPN General Purpose Transistor SSTA06 / MMSTA06 zDimensions (Unit : mm) zFeatures 1) BVCEO < 80V ( IC=1mA) 2) Complements the SSTA56 / MMSTA56. SSTA06 zPackage, marking and packaging specifications Part No. SSTA06 MMSTA06 Packaging type SST3 R1G SMT3 R1G T116 T146 3000 3000 Mark Code Basic ordering unit (pieces) (1) Emitter (2) Base (3) Collector ROHM : SST3 MMSTA06 (1) Emitter (2) Base (3) Collector ROHM : SMT3 EIAJ : SC-59 zAbsolute maximum ratings (Ta=25°C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Symbol Limits Unit VCBO VCEO 80 80 4 0.5 V V V A 0.2 W W∗ °C °C VEBO IC Collector power dissipation PC Junction temperature Tj 0.35 150 Storage temperature Tstg −55 to +150 ∗ Mounted on 7 x 5 x 0.6mm ceramic substrate. zElectrical characteristics (Ta=25°C) Symbol Min. Typ. Max. Unit Collector-base breakdown voltage Collector-emitter breakdown voltage Parameter BVCBO BVCEO 80 80 − − − − V V IC=100µA IC=1mA Emitter-base breakdown voltage BVEBO ICBO 4 − − − − − − 0.1 1 V IE=100µA VCB=80V VCE=60V − − 0.25 V IC/IB=100mA/10mA − − 1.2 V VCE/IB=1V/100mA 100 − − 100 − − − Collector cutoff current Collector-emitter saturation voltage ICEO VCE(sat) Base-emitter saturation voltage VBE(ON) DC current transfer ratio hFE Transition frequency fT 100 − µA − MHz Conditions VCE=1V, IC=10mA VCE=1V, IC=100mA VCE=2V, IE= −10mA, f=100MHz Rev.B 1/3 SSTA06 / MMSTA06 Transistors COLLECTOR CURRENT : IC (mA) 100 Ta=25˚C 500µA 450µA 400µA 80 350µA 300µA 60 250µA 200µA 40 150µA 100µA 20 50µA IB=0µA 0 0 5.0 1.0 2.0 3.0 4.0 COLLECTOR-EMITTER VOLTAGE : VCE (V) COLLECTOR EMITTER SATURATION VOLTAGE : VCE(sat) (V) zElectrical characteristics curves Ta=25˚C IC / IB=10 0.3 0.2 Ta=125˚C 0.1 25˚C 0 −40˚C 1 10 100 1000 COLLECTOR CURRENT : IC (mA) Fig.2 Collector-emitter saturation voltage vs. collector current Fig.1 Grounded emitter output characteristics 1000 DC CURRENT GAIN : hFE Ta=25˚C 5V VCE=10V 100 3V 1V 10 0.1 1.0 10 100 COLLECTOR CURRENT : IC (mA) 1000 1000 Ta=25˚C VCE=5V DC CURRENT GAIN : hFE Ta=125˚C 25˚C −40˚C 100 10 0.1 1.0 10 COLLECTOR CURRENT IC : (mA) 100 Fig.4 DC current gain vs. collector current ( II ) 1000 ASE EMITTER SATURATION VOLTAGEV : BE(sat) (V) Fig.3 DC current gain vs. collector current ( I ) 1.8 Ta=25˚C IC / IB=10 1.6 1.4 1.2 1.0 Ta=−40˚C 0.8 25˚C 0.6 125˚C 0.4 0.2 0 1 10 100 1000 COLLECTOR CURRENT : IC (mA) Fig.5 Base-emitter saturation voltage vs. collector current Rev.B 2/3 SSTA06 / MMSTA06 Transistors Cib Ta=25˚C f=1MHz 1.4 1.2 1.0 Ta=−40˚C 0.8 25˚C 0.6 125˚C Cob 10 0.2 1 10 100 1000 COLLECTOR CURRENT : IC (mA) Fig.6 Grounded emitter propagation characteristics 0.5 1 2 5 10 20 REVERSE BIAS VOLTAGE (V) Ta=25˚C VCE=5V 100 0.4 0 CURRENT GAIN-BANDWIDTH PRODUCT : fT (MHz) Ta=25˚C VCE=5V 1.6 CAPACITANCE (pF) BASE EMITTER VOLTAGE : VBE(ON) (V) 1000 100 1.8 50 Fig.7 Input / output capacitance vs. voltage 10 1 10 100 1000 COLLECTOR CURRENT : IC (mA) Fig.8 Gain bandwidth product vs. collector current Rev.B 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0