Order this document by MGW20N120/D SEMICONDUCTOR TECHNICAL DATA Motorola Preferred Device N–Channel Enhancement–Mode Silicon Gate This Insulated Gate Bipolar Transistor (IGBT) uses an advanced termination scheme to provide an enhanced and reliable high voltage–blocking capability. Short circuit rated IGBT’s are specifically suited for applications requiring a guaranteed short circuit withstand time. Fast switching characteristics result in efficient operation at high frequencies. IGBT IN TO–247 20 A @ 90°C 28 A @ 25°C 1200 VOLTS SHORT CIRCUIT RATED • Industry Standard High Power TO–247 Package with Isolated Mounting Hole • High Speed Eoff: 160 J/A typical at 125°C • High Short Circuit Capability – 10 s minimum • Robust High Voltage Termination C G G E C E CASE 340K–01 STYLE 4 TO–247AE MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Symbol Value Unit Collector–Emitter Voltage VCES 1200 Vdc Collector–Gate Voltage (RGE = 1.0 MΩ) VCGR 1200 Vdc Gate–Emitter Voltage — Continuous VGE ±20 Vdc Collector Current — Continuous @ TC = 25°C — Continuous @ TC = 90°C — Repetitive Pulsed Current (1) IC25 IC90 ICM 28 20 56 Adc PD 174 1.39 Watts W/°C TJ, Tstg – 55 to 150 °C tsc 10 s RθJC RθJA 0.7 35 °C/W TL 260 °C Total Power Dissipation @ TC = 25°C Derate above 25°C Operating and Storage Junction Temperature Range Short Circuit Withstand Time (VCC = 720 Vdc, VGE = 15 Vdc, TJ = 125°C, RG = 20 Ω) Thermal Resistance — Junction to Case – IGBT — Junction to Ambient Maximum Lead Temperature for Soldering Purposes, 1/8″ from case for 5 seconds Mounting Torque, 6–32 or M3 screw Apk 10 lbfSin (1.13 NSm) (1) Pulse width is limited by maximum junction temperature. Repetitive rating. Designer’s Data for “Worst Case” Conditions — The Designer’s Data Sheet permits the design of most circuits entirely from the information presented. SOA Limit curves — representing boundaries on device characteristics — are given to facilitate “worst case” design. Designer’s is a trademark of Motorola, Inc. Preferred devices are Motorola recommended choices for future use and best overall value. REV 1 IGBT Motorola Motorola, Inc. 1997 Device Data 1 MGW20N120 ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit 1200 — — 870 — — mV/°C 25 — — Vdc — — — — 100 2500 — — 250 — — — 2.42 2.36 2.90 3.54 — 4.99 4.0 — 6.0 10 8.0 — mV/°C gfe — 12 — Mhos pF OFF CHARACTERISTICS Collector–to–Emitter Breakdown Voltage (VGE = 0 Vdc, IC = 25 µAdc) Temperature Coefficient (Positive) V(BR)CES Emitter–to–Collector Breakdown Voltage (VGE = 0 Vdc, IEC = 100 mAdc) V(BR)ECS Zero Gate Voltage Collector Current (VCE = 1200 Vdc, VGE = 0 Vdc) (VCE = 1200 Vdc, VGE = 0 Vdc, TJ = 125°C) ICES Gate–Body Leakage Current (VGE = ± 20 Vdc, VCE = 0 Vdc) IGES Vdc µAdc nAdc ON CHARACTERISTICS (1) Collector–to–Emitter On–State Voltage (VGE = 15 Vdc, IC = 10 Adc) (VGE = 15 Vdc, IC = 10 Adc, TJ = 125°C) (VGE = 15 Vdc, IC = 20 Adc) VCE(on) Gate Threshold Voltage (VCE = VGE, IC = 1.0 mAdc) Threshold Temperature Coefficient (Negative) VGE(th) Forward Transconductance (VCE = 10 Vdc, IC = 20 Adc) Vdc Vdc DYNAMIC CHARACTERISTICS Input Capacitance Output Capacitance (VCE = 25 Vdc, Vdc VGE = 0 Vdc, Vdc f = 1.0 MHz) Transfer Capacitance Cies — 1860 — Coes — 122 — Cres — 29 — td(on) — 88 — tr — 103 — td(off) — 190 — tf — 284 — Eoff — 1.65 2.75 mJ td(on) — 83 — ns tr — 107 — td(off) — 216 — tf — 494 — Eoff — 3.19 — mJ QT — 62 — nC Q1 — 21 — Q2 — 25 — — 13 — SWITCHING CHARACTERISTICS (1) Turn–On Delay Time Rise Time Turn–Off Delay Time Fall Time (VCC = 720 Vdc, Vd IC = 20 Ad Adc, VGE = 15 Vdc, Vd L = 300 mH RG = 20 Ω) Energy losses include “tail” Turn–Off Switching Loss Turn–On Delay Time Rise Time Turn–Off Delay Time Fall Time (VCC = 720 Vdc, Vd IC = 20 Ad Adc, Vd L = 300 mH VGE = 15 Vdc, RG = 20 Ω, TJ = 125°C) 125 C) Energy losses include “tail” Turn–Off Switching Loss Gate Charge (VCC = 720 Vdc, Vdc IC = 20 Adc Adc, VGE = 15 Vdc) ns INTERNAL PACKAGE INDUCTANCE Internal Emitter Inductance (Measured from the emitter lead 0.25″ from package to emitter bond pad) LE nH (1) Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2%. 2 Motorola IGBT Device Data MGW20N120 TYPICAL ELECTRICAL CHARACTERISTICS IC, COLLECTOR CURRENT (AMPS) 60 VGE = 20 V TJ = 25°C 50 17.5 V 40 12.5 V 30 20 10 V 10 0 0 2 4 6 50 40 12.5 V 30 10 V 20 10 0 8 0 40 20 7 8 9 25°C 10 11 12 13 14 15 VCE , COLLECTOR–TO–EMITTER VOLTAGE (VOLTS) IC, COLLECTOR CURRENT (AMPS) VCE = 10 V 250 µs PULSE WIDTH 6 IC = 20 A 3 15 A 10 A 2 1 – 50 0 C, CAPACITANCE (pF) VGE, GATE–TO–EMITTER VOLTAGE (VOLTS) TJ = 25°C VGE = 0 V Coes Cres 10 10 15 20 VCE, COLLECTOR–TO–EMITTER VOLTAGE (VOLTS) Figure 5. Capacitance Variation Motorola IGBT Device Data 100 150 Figure 4. Collector–to–Emitter Saturation Voltage versus Junction Temperature 1000 5 50 TJ, JUNCTION TEMPERATURE (°C) 10,000 0 8 VGE = 15 V 250 µs PULSE WIDTH Figure 3. Transfer Characteristics 100 6 4 VGE, GATE–TO–EMITTER VOLTAGE (VOLTS) Cies 4 Figure 2. Output Characteristics 60 5 2 VCE, COLLECTOR–TO–EMITTER VOLTAGE (VOLTS) Figure 1. Output Characteristics 0 15 V 17.5 V VCE, COLLECTOR–TO–EMITTER VOLTAGE (VOLTS) TJ = 125°C VGE = 20 V TJ = 125°C 15 V IC, COLLECTOR CURRENT (AMPS) 60 25 16 QT 14 12 10 Q1 8 Q2 6 TJ = 25°C IC = 20 A 4 2 0 0 10 20 30 40 50 60 70 Qg, TOTAL GATE CHARGE (nC) Figure 6. Gate–to–Emitter Voltage versus Total Charge 3 MGW20N120 IC, COLLECTOR CURRENT (AMPS) 100 10 1 VGE = 15 V RGE = 20 Ω TJ = 125°C 0.1 1 10 100 1000 10,000 VCE, COLLECTOR–TO–EMITTER VOLTAGE (VOLTS) Figure 7. Reverse Biased Safe Operating Area 1.0 r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE D = 0.5 0.2 0.1 0.1 0.05 P(pk) 0.02 0.01 t1 SINGLE PULSE t2 DUTY CYCLE, D = t1/t2 0.01 1.0E–05 1.0E–04 1.0E–03 1.0E–02 1.0E–01 RθJC(t) = r(t) RθJC D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) – TC = P(pk) RθJC(t) 1.0E+00 1.0E+01 t, TIME (s) Figure 8. Thermal Response 4 Motorola IGBT Device Data MGW20N120 PACKAGE DIMENSIONS 0.25 (0.010) M –T– –Q– T B M E –B– C 4 L U A R 1 K 2 3 –Y– P V H F G D 0.25 (0.010) M Y Q J NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. DIM A B C D E F G H J K L P Q R U V MILLIMETERS MIN MAX 19.7 20.3 15.3 15.9 4.7 5.3 1.0 1.4 1.27 REF 2.0 2.4 5.5 BSC 2.2 2.6 0.4 0.8 14.2 14.8 5.5 NOM 3.7 4.3 3.55 3.65 5.0 NOM 5.5 BSC 3.0 3.4 INCHES MIN MAX 0.776 0.799 0.602 0.626 0.185 0.209 0.039 0.055 0.050 REF 0.079 0.094 0.216 BSC 0.087 0.102 0.016 0.031 0.559 0.583 0.217 NOM 0.146 0.169 0.140 0.144 0.197 NOM 0.217 BSC 0.118 0.134 S CASE 340K–01 TO–247AE ISSUE A STYLE 4: PIN 1. 2. 3. 4. GATE COLLECTOR EMITTER COLLECTOR Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447 JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 141, 4–32–1 Nishi–Gotanda, Shagawa–ku, Tokyo, Japan. 03–5487–8488 Customer Focus Center: 1–800–521–6274 Mfax: [email protected] – TOUCHTONE 1–602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 – http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ Motorola IGBT Device Data ◊ MGW20N120/D 5