CPH6531 Ordering number : ENA0521 SANYO Semiconductors DATA SHEET CPH6531 PNP Epitaxial Planar Silicon Transistor DC / DC Converter Applications Applications • Relay drivers, lamp drivers, motor drivers, flash. Features • • • Composite type with two PNP transistors contained in one package facilitating high-density mounting. The two chips contained are equivalent to the CPH3116. Ultrasmall package permitting applied sets to be small and slim. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO --50 Collector-to-Emitter Voltage VCES --50 V Collector-to-Emitter Voltage VCEO --50 V Emitter-to-Base Voltage VEBO --5 V Collector Current IC Collector Current (Pulse) V --1.0 A --2 A Base Current ICP IB Collector Dissipation PC Mounted on a ceramic board (600mm2✕0.8m) 1unit 0.9 W Total Power Dissipation PT Mounted on a ceramic board (600mm2✕0.8m) 1.1 W Junction Temperature Tj Storage Temperature Tstg --200 mA 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Symbol ICBO IEBO Conditions typ max Unit VCB=--40V, IE=0A --0.1 µA VEB=--4V, IC=0A --0.1 µA hFE fT VCE=--2V, IC=--100mA Gain-Bandwidth Product Output Capacitance Cob VCB=--10V, f=1MHz Marking : ES Ratings min VCE=--10V, IC=--300mA 200 560 420 9 MHz pF Continued on next page. Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before using any SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein. TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 11007EA TI IM TC-00000426 No. A0521-1/4 CPH6531 Continued from preceding page. Parameter Symbol Ratings Conditions min typ max Unit VCE(sat)1 IC=--500mA, IB=--10mA --230 --380 mV VCE(sat)2 IC=--300mA, IB=--6mA --125 --200 mV VBE(sat) V(BR)CBO IC=--500mA, IB=--10mA IC=--10µA, IE=0A --0.81 --1.2 V Collector-to-Base Breakdown Voltage --50 V Collector-to-Emitter Breakdown Voltage V(BR)CES IC=--100µA, RBE=0Ω --50 V Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=--1mA, RBE=∞ --50 V Emitter-to-Base Breakdown Voltage V(BR)EBO IE=--10µA, IC=0A --5 V Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Turm-ON Time ton tstg tf Storage Time Fall Time See specified Test Circuit. 35 ns See specified Test Circuit. 170 ns See specified Test Circuit. 30 ns Note) The specifications shown above are for each individual transistor. Package Dimensions Electrical Connection unit : mm (typ) 6 5 4 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 1 2 3 Top view 7018A-006 0.15 0.6 2.9 5 4 1.6 0.05 1 2 0.95 3 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 0.4 0.9 0.2 0.6 2.8 0.2 6 SANYO : CPH6 Switching Time Test Circuit IB1 PW=20µs D.C.≤1% VIN IC VOUT IB2 VR 50Ω RB + 100µF VBE=5V RL + 470µF VCC= --25V 20IB1= --20IB2=IC= --500mA No. A0521-2/4 CPH6531 --0.7 A --10m A m --8 --6mA --0.6 --4mA Collector Current, IC -- A --0.8 --0.9 --0.5 --2mA --0.4 --0.3 --0.2 --0.8 --0.7 --0.6 --0.5 --0.4 --0.3 --0.2 --0.1 --0.1 IB=0mA 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 Collector-to-Emitter Voltage, VCE -- V 0 0 --1.0 Gain-Bandwidth Product, f T -- MHz Ta=75°C --25°C 25°C 100 7 5 3 2 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 --0.5 --0.6 --0.7 --0.8 VCE= --10V 1000 7 5 3 2 100 7 5 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Output Capacitance, Cob -- pF 7 10 7 5 3 VCE(sat) -- IC 5 2 2 IT01649 f=1MHz 3 --1.0 IT11415 f T -- IC IT01647 5 --0.9 2 3 2 --0.01 3 Cob -- VCB 100 --0.4 3 3 10 --0.01 --0.3 5 7 2 --0.2 Base-to-Emitter Voltage, VBE -- V VCE= --2V 5 --0.1 IT11440 hFE -- IC 1000 DC Current Gain, hFE VCE= --2V Ta=7 5°C mA --20 0 --3 Collector Current, IC -- A --4 0m A mA --50 --0.9 IC -- VBE --1.0 mA 25°C --25°C IC -- VCE --1.0 3 2 --0.1 7 5°C 5 7 Ta= 3 --25 °C °C 25 2 3 2 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 Collector-to-Base Voltage, VCB -- V 2 3 5 7 --0.1 2 3 IC / IB=50 7 3 2 --0.1 5°C 7 Ta= 7 °C --25 5 C 25° 7 --1.0 IT11417 VBE(sat) -- IC --10 IC / IB=50 5 5 Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V --0.01 --0.01 VCE(sat) -- IC --1.0 7 5 7 --100 IT01651 5 3 2 --1.0 Ta= --25°C 7 75°C 5 25°C 3 2 3 2 --0.01 2 3 5 7 --0.1 2 3 Collector Current, IC -- A 5 7 --1.0 IT11419 --0.1 --0.01 2 3 5 7 --0.1 2 3 Collector Current, IC -- A 5 7 --1.0 IT01657 No. A0521-3/4 CPH6531 ASO 5 --1.0 7 5 ICP= --2A 1m s DC 10 0m er 2 ms op s 10 3 ati on --0.1 7 5 3 2 Ta=25°C Single pulse Mounted on a ceramic board (600mm2✕0.8mm) --0.01 --0.1 2 3 Mounted on a ceramic board (600mm2✕0.8mm) 1.2 IC= --1A µs s 100 0µ 50 Collector Current, IC -- A 2 Collector Dissipation, PC -- W 3 PC -- Ta 1.4 5 7 --1.0 2 3 5 7 --10 2 Collector-to-Emitter Voltage, VCE -- V 1.1 1.0 0.9 To ta 0.8 ld 1u nit 0.6 iss ipa tio n 0.4 0.2 0 3 5 7 IT11541 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT10764 Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of January, 2007. Specifications and information herein are subject to change without notice. PS No. A0521-4/4