FQN1N50C N-Channel QFET MOSFET 500 V, 0.38 A, 6 Ω Description Features This N-Channel enhancement mode power MOSFET is produced using Fairchild Semiconductor®’s proprietary planar stripe and DMOS technology. This advanced MOSFET technology has been especially tailored to reduce on-state resistance, and to provide superior switching performance and high avalanche energy strength. These devices are suitable for switched mode power supplies, active power factor correction (PFC), and electronic lamp ballasts. • 0.38 A, 500 V, RDS(on) = 6 Ω (Max) @VGS = 10 V, ID = 0.19 A • Low Gate Charge (Typ. 4.9 nC) • Low Crss (Typ. 4.1 pF) • 100% Avalanche Tested D G G D TO-92 FQN Series S S Absolute Maximum Ratings Symbol Parameter FQN1N50C Unit VDSS Drain-Source Voltage 500 V ID Drain Current - Continuous (TC = 25°C) 0.38 A - Continuous (TC = 100°C) 0.24 A 3.04 A ± 30 V IDM Drain Current VGSS Gate-Source Voltage - Pulsed (Note 1) EAS Single Pulsed Avalanche Energy (Note 2) 44.4 mJ IAR Avalanche Current (Note 1) 0.38 A EAR Repetitive Avalanche Energy (Note 1) 0.21 mJ dv/dt Peak Diode Recovery dv/dt (Note 3) 4.5 V/ns PD Power Dissipation (TA = 25°C) 0.89 W Power Dissipation (TL = 25°C) 2.08 W - Derate above 25°C TJ, TSTG Operating and Storage Temperature Range TL Maximum lead temperature for soldering purposes, 1/8" from case for 5 seconds 0.017 W/°C -55 to +150 °C 300 °C Thermal Characteristics Typ Max RθJL Symbol Thermal Resistance, Junction-to-Lead Parameter (Note 6a) -- 60 °C/W RθJA Thermal Resistance, Junction-to-Ambient (Note 6b) -- 140 °C/W ©2001 Fairchild Semiconductor Corporation FQN1N50C Rev. C0 1 Unit www.fairchildsemi.com FQN1N50C N-Channel MOSFET March 2013 Device Marking Device Package Reel Size Tape Width Quantity 1N50C FQN1N50C TO-92 -- -- 2000ea Electrical Characteristics Symbol TC = 25°C unless otherwise noted Parameter Test Conditions Min. Typ. Max. Unit 500 -- -- V Off Characteristics BVDSS Drain-Source Breakdown Voltage VGS = 0 V, ID = 250 µA ∆BVDSS/ ∆TJ Breakdown Voltage Temperature Coefficient ID = 250 µA, Referenced to 25°C -- 0.5 -- V/°C IDSS Zero Gate Voltage Drain Current VDS = 500 V, VGS = 0 V -- -- 50 µA VDS = 400 V, TC = 125°C -- -- 250 µA IGSSF Gate-Body Leakage Current, Forward VGS = 30 V, VDS = 0 V -- -- 100 nA IGSSR Gate-Body Leakage Current, Reverse VGS = -30 V, VDS = 0 V -- -- -100 nA On Characteristics VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 µA 2.0 -- 4.0 V RDS(on) Static Drain-Source On-Resistance VGS = 10 V, ID = 0.19 A -- 4.6 6.0 Ω gFS Forward Transconductance VDS = 40 V, ID = 0.19A -- 0.6 -- S -- 150 195 pF -- 28 40 pF -- 4.1 -- pF -- 10 30 ns -- 10 30 ns -- 20 50 ns -- 15 40 ns -- 4.9 6.4 nC -- 0.66 -- nC -- 2.9 -- nC -- -- 0.38 A (Note 4) Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance VDS = 25 V, VGS = 0 V, f = 1.0 MHz Switching Characteristics td(on) Turn-On Delay Time tr Turn-On Rise Time td(off) Turn-Off Delay Time tf Turn-Off Fall Time Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge VDD = 250 V, ID = 1.0 A, RG = 25 Ω (Note 4, 5) VDS = 400 V, ID = 1.0 A, VGS = 10 V (Note 4, 5) Drain-Source Diode Characteristics and Maximum Ratings IS Maximum Continuous Drain-Source Diode Forward Current ISM Maximum Pulsed Drain-Source Diode Forward Current -- -- 3.04 A VSD Drain-Source Diode Forward Voltage VGS = 0 V, IS = 0.38 A -- -- 1.4 V trr Reverse Recovery Time VGS = 0 V, IS = 1.0 A, dIF / dt = 100 A/µs -- 188 -- ns -- 0.55 -- µC Qrr Reverse Recovery Charge (Note 4) Notes: 1. Repetitive Rating : Pulse width limited by maximum junction temperature 2. L = 80mH, IAS = 1.0A, VDD = 50V, RG = 25 Ω, Starting TJ = 25°C 3. ISD ≤ 0.38A, di/dt ≤ 200A/µs, VDD ≤ BVDSS, Starting TJ = 25°C 4. Pulse Test : Pulse width ≤ 300µs, Duty cycle ≤ 2% 5. Essentially independent of operating temperature 6. a) Reference point of the RθJL is the drain lead b) When mounted on 3”x4.5” FR-4 PCB without any pad copper in a still air environment (RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance. RθCA is determined by the user’s board design) ©2001 Fairchild Semiconductor Corporation FQN1N50C Rev. C0 2 www.fairchildsemi.com FQN1N50C N-Channel MOSFET Package Marking and Ordering Information FQN1N50C N-Channel MOSFET Typical Performance Characteristics Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics VGS 15.0 V 10.0 V 8.0 V 7.0 V 6.5 V 6.0 V 5.5 V 5.0 V Bottom : 4.5 V ID, Drain Current [A] 10 10 10 0 ID, Drain Current [A] Top : -1 0 10 o 150 C o 25 C o -55 C ※ Notes : 1. VDS = 40V 2. 250µ s Pulse Test ※ Notes : 1. 250µ s Pulse Test 2. TC = 25℃ -2 10 -1 10 0 10 -1 10 1 2 4 VDS, Drain-Source Voltage [V] 6 8 10 VGS, Gate-Source Voltage [V] Figure 3. On-Resistance Variation vs. Drain Current and Gate Voltage Figure 4. Body Diode Forward Voltage Variation vs. Source Current and Temperatue IDR, Reverse Drain Current [A] RDS(ON) [Ω ], Drain-Source On-Resistance 20 15 VGS = 10V 10 VGS = 20V 5 ※ Note : TJ = 25℃ 0 0.0 0 10 150℃ ※ Notes : 1. VGS = 0V 2. 250µ s Pulse Test -1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 10 4.0 0.2 0.4 ID, Drain Current [A] 400 1.0 1.2 1.4 12 VGS, Gate-Source Voltage [V] Capacitances [pF] 0.8 Figure 6. Gate Charge Characteristics Ciss = Cgs + Cgd (Cds = shorted) Coss = Cds + Cgd Crss = Cgd Coss Ciss * Note : 1. VGS = 0 V 2. f = 1 MHz 200 100 0.6 VSD, Source-Drain voltage [V] Figure 5. Capacitance Characteristics 300 25℃ Crss VDS = 100V 10 VDS = 250V VDS = 400V 8 6 4 2 ※ Note : ID = 1A 0 -1 10 0 10 0 1 10 ©2001 Fairchild Semiconductor Corporation FQN1N50C Rev. C0 0 1 2 3 4 5 6 QG, Total Gate Charge [nC] VDS, Drain-Source Voltage [V] 3 www.fairchildsemi.com FQN1N50C N-Channel MOSFET Typical Performance Characteristics (Continued) Figure 7. Breakdown Voltage Variation vs. Temperature Figure 8. On-Resistance Variation vs. Temperature 3.0 RDS(ON), (Normalized) Drain-Source On-Resistance BVDSS, (Normalized) Drain-Source Breakdown Voltage 1.2 1.1 1.0 ※ Notes : 1. VGS = 0 V 2. ID = 250 µA 0.9 0.8 -100 -50 0 50 100 150 2.5 2.0 1.5 1.0 ※ Notes : 1. VGS = 10 V 2. ID = 0.19 A 0.5 0.0 -100 200 -50 0 50 100 150 200 o o TJ, Junction Temperature [ C] TJ, Junction Temperature [ C] Figure 9. Maximum Safe Operating Area Figure 10. Maximum Drain Current vs. Case Temperature 1 10 0.4 10 µs 100 µs 0.3 1 ms 10 ms ID, Drain Current [A] ID, Drain Current [A] 0 10 100 ms Operation in This Area is Limited by R DS(on) -1 10 DC -2 ※ Notes : 10 o 1. TC = 25 C 0.2 0.1 o 2. TJ = 150 C 3. Single Pulse -3 10 0 10 1 2 10 0.0 25 3 10 10 50 VDS, Drain-Source Voltage [V] 75 100 125 150 TC, Case Temperature [℃] Figure 11. Transient Thermal Response Curve 10 2 Zθ JC(t), Thermal Response D = 0 .5 10 0 .2 1 0 .1 PDM 0 .0 5 10 t1 0 .0 2 0 .0 1 0 ※ N o te s : 1 . Z θ J L (t) = 6 0 ℃ /W M a x . 2 . D u ty F a c to r, D = t 1 /t 2 3 . T J M - T L = P D M * Z q J C (t) s in g le p u ls e 10 -1 10 -5 10 -4 10 -3 10 t2 -2 10 -1 10 0 10 1 10 2 10 3 t 1 , S q u a re W a v e P u ls e D u ra tio n [s e c ] ©2001 Fairchild Semiconductor Corporation FQN1N50C Rev. C0 4 www.fairchildsemi.com FQN1N50C N-Channel MOSFET Gate Charge Test Circuit & Waveform Resistive Switching Test Circuit & Waveforms Unclamped Inductive Switching Test Circuit & Waveforms ©2001 Fairchild Semiconductor Corporation FQN1N50C Rev. C0 5 www.fairchildsemi.com FQN1N50C N-Channel MOSFET Peak Diode Recovery dv/dt Test Circuit & Waveforms ©2001 Fairchild Semiconductor Corporation FQN1N50C Rev. C0 6 www.fairchildsemi.com FQN1N50C N-Channel MOSFET Mechanical Dimensions TO-92 Dimensions in Millimeters ©2001 Fairchild Semiconductor Corporation FQN1N50C Rev. C0 7 www.fairchildsemi.com *Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used here in: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website, www.Fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Definition Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I64 ©2001 Fairchild Semiconductor Corporation FQN1N50C Rev. C0 www.fairchildsemi.com FQN1N50C N-Channel MOSFET TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. FPS™ Sync-Lock™ 2Cool™ ® F-PFS™ AccuPower™ ®* ® ® ® FRFET PowerTrench AX-CAP * SM BitSiC™ Global Power Resource PowerXS™ TinyBoost™ Green Bridge™ Build it Now™ Programmable Active Droop™ TinyBuck™ Green FPS™ CorePLUS™ QFET® TinyCalc™ Green FPS™ e-Series™ QS™ CorePOWER™ TinyLogic® CROSSVOLT™ Gmax™ Quiet Series™ TINYOPTO™ CTL™ GTO™ RapidConfigure™ TinyPower™ Current Transfer Logic™ IntelliMAX™ ™ TinyPWM™ DEUXPEED® ISOPLANAR™ TinyWire™ Dual Cool™ Marking Small Speakers Sound Louder Saving our world, 1mW/W/kW at a time™ TranSiC® EcoSPARK® and Better™ SignalWise™ TriFault Detect™ EfficentMax™ MegaBuck™ SmartMax™ TRUECURRENT®* ESBC™ MICROCOUPLER™ SMART START™ μSerDes™ MicroFET™ Solutions for Your Success™ ® MicroPak™ SPM® MicroPak2™ STEALTH™ Fairchild® UHC® MillerDrive™ SuperFET® Fairchild Semiconductor® Ultra FRFET™ MotionMax™ SuperSOT™-3 FACT Quiet Series™ UniFET™ mWSaver™ SuperSOT™-6 FACT® VCX™ OptoHiT™ SuperSOT™-8 FAST® VisualMax™ OPTOLOGIC® SupreMOS® FastvCore™ VoltagePlus™ OPTOPLANAR® SyncFET™ FETBench™ XS™