FDT86106LZ N-Channel PowerTrench® MOSFET 100 V, 3.2 A, 108 mΩ Features General Description This N-Channel logic Level MOSFETs are produced using Fairchild Semiconductor‘s advanced Power Trench® process that has been special tailored to minimize the on-state resistance and yet maintain superior switching performance. G-S zener has been added to enhance ESD voltage level. Max rDS(on) = 108 mΩ at VGS = 10 V, ID = 3.2 A Max rDS(on) = 153 mΩ at VGS = 4.5 V, ID = 2.7 A High performance trench technology for extremely low rDS(on) High power and current handling capability in a widely used surface mount package Application HBM ESD protection level > 3 KV typical (Note 4) DC - DC Conversion 100% UIL tested RoHS Compliant D S D SOT-223 G MOSFET Maximum Ratings TC = 25 °C unless otherwise noted Symbol VDS Drain to Source Voltage Parameter VGS Gate to Source Voltage Drain Current -Continuous ID TA = 25 °C (Note 1a) -Pulsed PD TJ, TSTG Units V ±20 V 3.2 12 Single Pulse Avalanche Energy EAS Ratings 100 (Note 3) 12 Power Dissipation TA = 25 °C (Note 1a) 2.2 Power Dissipation TA = 25 °C (Note 1b) 1.0 Operating and Storage Junction Temperature Range -55 to +150 A mJ W °C Thermal Characteristics RθJC Thermal Resistance, Junction to Case RθJA Thermal Resistance, Junction to Ambient 12 (Note 1a) 55 °C/W Package Marking and Ordering Information Device Marking 86106LZ Device FDT86106LZ ©2013 Fairchild Semiconductor Corporation FDT86106LZ Rev.C2 Package SOT-223 1 Reel Size 13 ’’ Tape Width 12 mm Quantity 2500 units www.fairchildsemi.com FDT86106LZ N-Channel PowerTrench® MOSFET January 2013 Symbol Parameter Test Conditions Min Typ Max Units Off Characteristics BVDSS Drain to Source Breakdown Voltage ID = 250 μA, VGS = 0 V ΔBVDSS ΔTJ Breakdown Voltage Temperature Coefficient ID = 250 μA, referenced to 25 °C IDSS Zero Gate Voltage Drain Current VDS = 80 V, VGS = 0 V 1 μA IGSS Gate to Source Leakage Current VGS = ±20 V, VDS = 0 V ±10 μA 2.2 V 100 V 71 mV/°C On Characteristics (Note 2) VGS(th) Gate to Source Threshold Voltage VGS = VDS, ID = 250 μA ΔVGS(th) ΔTJ Gate to Source Threshold Voltage Temperature Coefficient ID = 250 μA, referenced to 25 °C rDS(on) gFS Static Drain to Source On Resistance Forward Transconductance 1.0 1.5 -5 mV/°C VGS = 10 V, ID = 3.2 A 80 108 VGS = 4.5 V, ID = 2.7 A 100 153 VGS = 10 V, ID = 3.2 A, TJ = 125 °C 140 189 VDS = 10 V, ID = 3.2 A 8 mΩ S Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance VDS = 50 V, VGS = 0 V, f = 1 MHz 234 315 pF 46 65 pF 3.1 5 pF 3.8 10 ns 1.3 10 ns 10 20 ns 1.5 10 ns 4.3 7 nC 2.4 4 Switching Characteristics td(on) Turn-On Delay Time tr Rise Time td(off) Turn-Off Delay Time tf Fall Time Qg Total Gate Charge VGS = 0 V to 10 V Qg Total Gate Charge VGS = 0 V to 5 V Qgs Gate to Source Gate Charge Qgd Gate to Drain “Miller” Charge VDD = 50 V, ID = 3.2 A, VGS = 10 V, RGEN = 6 Ω VDD = 50 V, ID = 3.2 A nC 0.7 nC 0.9 nC Drain-Source Diode Characteristics VSD Source to Drain Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge VGS = 0 V, IS = 3.2 A (Note 2) 0.86 1.3 VGS = 0 V, IS = 1 A (Note 2) 0.77 1.2 IF = 3.2 A, di/dt = 100 A/μs V 31 49 ns 21 34 nC Notes: 1. RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RθJC is guaranteed by design while RθJA is determined by the user’s board design. a) 55 °C/W when mounted on a 1 in2 pad of 2 oz copper b) 118 °C/W when mounted on a minimum pad of 2 oz copper 2. Pulse Test: Pulse Width < 300 μs, Duty cycle < 2.0%. 3. Starting TJ = 25°C, L = 1 mH, IAS = 5 A, VDD = 90 V, VGS = 10 V. 4. The diode connected between the gate and source serves only as protection against ESD. No gate overvoltage rating is implied. FDT86106LZ Rev.C2 2 www.fairchildsemi.com FDT86106LZ N-Channel PowerTrench® MOSFET Electrical Characteristics TJ = 25 °C unless otherwise noted 5 VGS = 10 V VGS = 4.5 V VGS = 4 V 9 NORMALIZED DRAIN TO SOURCE ON-RESISTANCE ID, DRAIN CURRENT (A) 12 VGS = 3.5 V 6 VGS = 3 V 3 PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX 0 0 1 2 3 4 VGS = 3 V 4 VGS = 3.5 V 3 VGS = 4 V 2 1 PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX 0 5 0 3 VDS, DRAIN TO SOURCE VOLTAGE (V) 12 500 ID = 3.2 A VGS = 10 V 1.8 rDS(on), DRAIN TO 1.6 1.4 1.2 1.0 0.8 0.6 -75 -50 SOURCE ON-RESISTANCE (mΩ) NORMALIZED DRAIN TO SOURCE ON-RESISTANCE 9 Figure 2. Normalized On-Resistance vs Drain Current and Gate Voltage 2.0 IS, REVERSE DRAIN CURRENT (A) VDS = 5 V TJ = 150 oC 6 TJ = 25 oC 3 TJ = -55 oC 2 3 4 400 300 200 TJ = 125 oC 100 TJ = 25 oC 2 4 6 8 10 Figure 4. On-Resistance vs Gate to Source Voltage PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX 1 PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX VGS, GATE TO SOURCE VOLTAGE (V) 12 9 ID = 3.2 A 0 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (oC) Figure 3. Normalized On- Resistance vs Junction Temperature ID, DRAIN CURRENT (A) 6 ID, DRAIN CURRENT (A) Figure 1. On-Region Characteristics 0 VGS = 10 V VGS = 4.5 V 20 10 TJ = 150 oC 1 TJ = 25 oC 0.1 TJ = -55 oC 0.01 0.001 0.2 5 VGS = 0 V 0.4 0.6 0.8 1.0 VGS, GATE TO SOURCE VOLTAGE (V) VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 5. Transfer Characteristics Figure 6. Source to Drain Diode Forward Voltage vs Source Current FDT86106LZ Rev.C2 3 1.2 www.fairchildsemi.com FDT86106LZ N-Channel PowerTrench® MOSFET Typical Characteristics TJ = 25 °C unless otherwise noted 400 ID = 3.2 A Ciss 8 100 VDD = 50 V CAPACITANCE (pF) VGS, GATE TO SOURCE VOLTAGE (V) 10 6 VDD = 25 V VDD = 75 V 4 Coss 10 2 0 f = 1 MHz VGS = 0 V 0 1 2 3 4 5 1 10 100 VDS, DRAIN TO SOURCE VOLTAGE (V) Qg, GATE CHARGE (nC) Figure 7. Gate Charge Characteristics Figure 8. Capacitance vs Drain to Source Voltage -1 10 7 6 5 TJ = 25 oC 4 TJ = 100 oC 3 TJ 2 -2 = 125 oC VDS = 0 V 10 Ig, GATE LEAKAGE CURRENT (A) IAS, AVALANCHE CURRENT (A) Crss 1 0.1 -3 10 -4 10 TJ = 125 oC -5 10 -6 10 TJ = 25 oC -7 10 -8 10 -9 10 -10 1 0.01 0.1 1 10 2 0 5 tAV, TIME IN AVALANCHE (ms) 10 15 20 25 30 35 VGS, GATE TO SOURCE VOLTAGE (V) Figure 9. Unclamped Inductive Switching Capability Figure 10. Gate Leakage Current vs Gate to Source Voltage 20 8 6 ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) 10 VGS = 10 V 4 Limited by package VGS = 4.5 V 2 100 us 1 1 ms THIS AREA IS LIMITED BY rDS(on) 0.1 RθJC = 12 C/W 50 1s 10 s TA = 25 oC 75 100 125 0.01 0.1 150 o 1 DC 10 100 400 VDS, DRAIN to SOURCE VOLTAGE (V) TC, CASE TEMPERATURE ( C) Figure 11. Maximum Continuous Drain Current vs Case Temperature FDT86106LZ Rev.C2 SINGLE PULSE TJ = MAX RATED RθJA = 118 oC/W o 0 25 10 ms 100 ms Figure 12. Forward Bias Safe Operating Area 4 www.fairchildsemi.com FDT86106LZ N-Channel PowerTrench® MOSFET Typical Characteristics TJ = 25 °C unless otherwise noted P(PK), PEAK TRANSIENT POWER (W) 300 100 10 SINGLE PULSE o RθJA = 118 C/W 1 o TA = 25 C 0.5 -4 10 -3 10 -2 10 -1 10 1 100 10 1000 t, PULSE WIDTH (sec) Figure 13. Single Pulse Maximum Power Dissipation 2 NORMALIZED THERMAL IMPEDANCE, ZθJA 1 0.1 DUTY CYCLE-DESCENDING ORDER D = 0.5 0.2 0.1 0.05 0.02 0.01 PDM t1 0.01 t2 SINGLE PULSE NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZθJA x RθJA + TA o RθJA = 118 C/W 0.001 -4 10 -3 10 -2 10 -1 10 1 10 100 1000 t, RECTANGULAR PULSE DURATION (sec) Figure 14. Junction-to-Ambient Transient Thermal Response Curve FDT86106LZ Rev.C2 5 www.fairchildsemi.com FDT86106LZ N-Channel PowerTrench® MOSFET Typical Characteristics TJ = 25 °C unless otherwise noted tm tm *Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used here in: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website, www.Fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I61 FDT86106LZ Rev.C2 6 www.fairchildsemi.com FDT86106LZ N-Channel PowerTrench® MOSFET TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. 2Cool™ PowerTrench® F-PFS™ The Power Franchise® ® AccuPower™ PowerXS™ FRFET® Global Power ResourceSM AX-CAP™* Programmable Active Droop™ ® ® Green Bridge™ BitSiC QFET TinyBoost™ Build it Now™ QS™ Green FPS™ TinyBuck™ CorePLUS™ Quiet Series™ Green FPS™ e-Series™ TinyCalc™ CorePOWER™ RapidConfigure™ Gmax™ TinyLogic® CROSSVOLT™ GTO™ ™ TINYOPTO™ CTL™ IntelliMAX™ TinyPower™ Current Transfer Logic™ Saving our world, 1mW/W/kW at a time™ ISOPLANAR™ TinyPWM™ DEUXPEED® Marking Small Speakers Sound Louder SignalWise™ TinyWire™ Dual Cool™ SmartMax™ and Better™ TranSiC® EcoSPARK® SMART START™ MegaBuck™ TriFault Detect™ EfficentMax™ Solutions for Your Success™ MICROCOUPLER™ TRUECURRENT®* ESBC™ SPM® MicroFET™ μSerDes™ STEALTH™ MicroPak™ ® SuperFET® MicroPak2™ ® SuperSOT™-3 MillerDrive™ Fairchild UHC® SuperSOT™-6 MotionMax™ Fairchild Semiconductor® Ultra FRFET™ SuperSOT™-8 Motion-SPM™ FACT Quiet Series™ UniFET™ SupreMOS® mWSaver™ FACT® VCX™ SyncFET™ OptoHiT™ FAST® ® VisualMax™ Sync-Lock™ OPTOLOGIC FastvCore™ ® VoltagePlus™ OPTOPLANAR ®* FETBench™ XS™ FlashWriter® * ® FPS™