STGW45HF60WDI 45 A, 600 V ultra fast IGBT with low drop diode Features ■ Improved Eoff at elevated temperature ■ Low VF soft recovery antiparallel diode Applications ■ Welding ■ Induction heating ■ Resonant converters 2 3 1 TO-247 Description The STGW45HF60WDI is based on a new advanced planar technology concept to yield an IGBT with more stable switching performance (Eoff) versus temperature, as well as lower conduction losses. The device is tailored to high switching frequency operation (over 100 kHz). Table 1. Figure 1. Internal schematic diagram Device summary Order code Marking Package STGW45HF60WDI GW45HF60WDI TO-247 STGWA45HF60WDI 45HF60WDI TO-247 long leads Packaging Tube December 2010 Doc ID 16091 Rev 2 1/16 www.st.com 16 Content STGW45HF60WDI Content 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2/16 ............................................... 9 Doc ID 16091 Rev 2 STGW45HF60WDI 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter Unit TO-247 VCES (1) Collector-emitter voltage (VGE = 0) 600 V Continuous collector current at TC = 25 °C 70 80 A IC (1) Continuous collector current at TC = 100 °C 45 50 A ICP(2) Pulsed collector current 150 A (3) Turn-off latching current 80 A ± 20 V Diode RMS forward current at TC = 25 °C 30 A IFSM Surge not repetitive forward current tp= 10 ms sinusoidal 130 A PTOT Total dissipation at TC = 25 °C Tstg Storage temperature IC ICL VGE IF Tj 1. TO-247 long leads Gate-emitter voltage 250 310 – 55 to 150 W °C Operating junction temperature Calculated according to the iterative formula: T j ( max ) – T C I C ( T C ) = --------------------------------------------------------------------------------------------------------R thj – c × V CE ( sat ) ( max ) ( T j ( max ), I C ( T C ) ) 2. Pulse width limited by maximum junction temperature and turn-off within RBSOA 3. VCLAMP = 80% (VCES), VGE = 15 V, RG = 10 Ω, TJ = 150 °C Table 3. Thermal data Value Symbol Parameter Thermal resistance junction-case IGBT Rthj-case Rthj-amb Unit TO-247 TO-247 long leads 0.5 0.4 °C/W Thermal resistance junction-case diode 1.5 °C/W Thermal resistance junction-ambient 50 °C/W Doc ID 16091 Rev 2 3/16 Electrical characteristics 2 STGW45HF60WDI Electrical characteristics (TJ = 25 °C unless otherwise specified). Table 4. Symbol Static Parameter Test conditions Collector-emitter V(BR)CES breakdown voltage (VGE = 0) IC = 1 mA Collector-emitter saturation VGE = 15 V, IC= 30 A voltage VGE = 15V, IC = 30 A,TJ= 125 °C VGE(th) Gate threshold voltage VCE = VGE, IC = 1 mA ICES Collector cut-off current (VGE = 0) VCE = 600 V VCE = 600 V, TJ = 125 °C IGES Gate-emitter leakage current (VCE = 0) VGE = ±20 V Symbol Typ. Max. Unit 600 VCE(sat) Table 5. V 1.9 1.65 3.75 2.5 V V 5.75 V 500 5 µA mA ± 100 nA Dynamic Parameter Test conditions Min. Typ. Max. Unit Cies Coes Cres Input capacitance Output capacitance Reverse transfer capacitance VCE = 25 V, f = 1 MHz, VGE = 0 - 2900 260 55 - pF pF pF Qg Qge Qgc Total gate charge Gate-emitter charge Gate-collector charge VCE = 400 V, IC = 30 A, VGE = 15 V Figure 18 - 160 17 65 - nC nC nC Table 6. Symbol 4/16 Min. Switching off (inductive load) Parameter Test conditions Min. Typ. Max. Unit tr(Voff) td(off) tf Off voltage rise time Turn-off delay time Current fall time VCC = 400 V, IC = 30 A, RGE = 4.7 Ω, VGE = 15 V Figure 17 - 30 145 50 - ns ns ns tr(Voff) td(off) tf Off voltage rise time Turn-off delay time Current fall time VCC = 400 V, IC = 30 A, RGE = 4.7 Ω, VGE =15 V, TJ = 125 °C Figure 17 - 47 185 65 - ns ns ns Doc ID 16091 Rev 2 STGW45HF60WDI Table 7. Symbol Electrical characteristics Switching energy (inductive load) Parameter Test conditions Min. Typ. Max. Unit Eoff Turn-off switching losses VCC = 400 V, IC = 30 A RG = 4.7 Ω, VGE = 15 V, Figure 19 - 330 Eoff Turn-off switching losses VCC = 400 V, IC = 30 A RG = 4.7 Ω, VGE = 15 V, TJ = 125 °C, Figure 19 - 550 800 µJ Min. Typ. Max. Unit 1.8 V V Table 8. Symbol µJ Collector-emitter diode Parameter Test conditions VF Forward on-voltage IF = 30 A IF = 30 A, TJ = 125 °C - 1.4 1.2 trr Qrr Irrm Reverse recovery time Reverse recovery charge Reverse recovery current IF = 30 A,VR = 50 V, di/dt = 100 A/µs Figure 20 - 90 305 5.2 - ns nC A trr Qrr Irrm Reverse recovery time Reverse recovery charge Reverse recovery current TJ =125 °C, di/dt = 100 A/µs - 235 1100 9 - ns nC A IF = 30 A,VR = 50 V, Figure 20 Doc ID 16091 Rev 2 5/16 Electrical characteristics STGW45HF60WDI 2.1 Electrical characteristics (curves) Figure 2. Output characteristics Figure 3. Transfer characteristics )# ! )# ! 6'%6 6 6 6#%6 6 6 6 Figure 4. 6#%6 Normalized VCE(sat) vs. IC Figure 5. 6'%6 Normalized VCE(sat) vs. temperature 6#%SAT NORM 6#%SAT NORM 6'%6 4*# )#! 4*# ! ! ! 4*# ! ! )#! 6'%6 Figure 6. )#! Normalized breakdown voltage vs. temperature Figure 7. 4* # Normalized gate threshold voltage vs. temperature 6'%TH NORM 6#%3 NORM )#M! 6'%6#% 6/16 )#! 4* # Doc ID 16091 Rev 2 4* # STGW45HF60WDI Figure 8. Electrical characteristics Gate charge vs. gate-emitter voltage Figure 9. Capacitances variations 6'%6 6##6 F-(Z 6'% )#! #IES #OES #RES 1'N# Figure 10. Switching losses vs. temperature 6#%6 Figure 11. Switching losses vs. gate resistance %* %* %/&& %/&& 6#%66'% 6)# !2' ȍ 6#%66'%6 )# !4* # 4* # Figure 12. Switching losses vs. collector current %* 2 G ȍ Figure 13. Turn-off SOA )#! %/&& 6'%62'ª 4# # 6#%66'%6 2' ȍ4* # )# ! Doc ID 16091 Rev 2 6#% 6 7/16 Electrical characteristics STGW45HF60WDI Figure 14. Diode forward on voltage Figure 15. Thermal impedance for TO-247 )&-! 4J # MAXIMUMVALUES 4J # TYPICALVALUES 4J # MAXIMUMVALUES 6&-6 Figure 16. Thermal impedance for TO-247 narrow leads 8/16 Doc ID 16091 Rev 2 STGW45HF60WDI 3 Test circuits Test circuits Figure 17. Test circuit for inductive load switching Figure 18. Gate charge test circuit AM01504v1 Figure 19. Switching waveform AM01505v1 Figure 20. Diode recovery time waveform VG IF trr 90% VCE Qrr di/dt 90% 10% ta tb 10% Tr(Voff) t Tcross 90% IRRM IRRM IC 10% Td(off) Td(on) Tr(Ion) Ton Tf Toff VF dv/dt AM01506v1 Doc ID 16091 Rev 2 AM01507v1 9/16 Package mechanical data 4 STGW45HF60WDI Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 10/16 Doc ID 16091 Rev 2 STGW45HF60WDI Package mechanical data Table 9. TO-247 mechanical data mm Dim. Min. Typ. Max. A 4.85 5.15 A1 2.20 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c 0.40 0.80 D 19.85 20.15 E 15.45 15.75 e 5.45 L 14.20 14.80 L1 3.70 4.30 L2 18.50 ∅P 3.55 3.65 ∅R 4.50 5.50 S 5.50 Doc ID 16091 Rev 2 11/16 Package mechanical data STGW45HF60WDI Figure 21. TO-247 drawing 0075325_F 12/16 Doc ID 16091 Rev 2 STGW45HF60WDI Package mechanical data Table 10. TO-247 long leads mechanical data mm Dim. Min. Typ. Max. A 4.90 5.15 D 1.85 2.10 E 0.55 0.67 F 1.07 1.32 F1 1.90 2.38 F2 2.87 3.38 G 10.90 BSC H 15.77 16.02 L 20.82 21.07 L1 4.16 4.47 L2 5.49 5.74 L3 20.05 20.30 L4 3.68 3.93 L5 6.04 6.29 M 2.27 2.52 V 10° V1 3° V3 20° Dia. 3.55 3.66 Doc ID 16091 Rev 2 13/16 Package mechanical data STGW45HF60WDI Figure 22. TO-247 long leads drawing 14/16 Doc ID 16091 Rev 2 STGW45HF60WDI 5 Revision history Revision history Table 11. Document revision history Date Revision 04-Aug-2009 1 Initial release. 2 Document status promoted from preliminary data to datasheet. Inserted dynamic parameters on Table 5, Table 6, Table 7 and Table 8. Inserted Section 2.1: Electrical characteristics (curves). Updated TO-247 long leads package mechanical data. 21-Dec-2010 Changes Doc ID 16091 Rev 2 15/16 STGW45HF60WDI Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16 Doc ID 16091 Rev 2