STV240N75F3 N-channel 75 V, 2.3 mΩ, 240 A PowerSO-10 STripFET™ III Power MOSFET Features Type VDSS RDS(on) max ID STV240N75F3 75 V < 2.6 mΩ 240 A ■ Conduction losses reduced ■ Low profile, very low parasitic inductance 10 1 PowerSO-10 Application ■ Switching applications Figure 1. Description Internal schematic diagram and connection diagram (top view) This STripFET™ III Power MOSFET technology is among the latest improvements, which have been especially tailored to minimize on-state resistance providing superior switching performances. Table 1. Device summary Order code Marking Package Packaging STV240N75F3 240N75F3 PowerSO-10 Tape and reel January 2010 Doc ID 14595 Rev 2 1/15 www.st.com 15 Contents STV240N75F3 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 5.1 6 2/15 .............................................. 8 Tape and reel for PowerSO-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Doc ID 14595 Rev 2 STV240N75F3 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit 75 V VDS Drain-source voltage (VGS = 0) VGS Gate-source voltage ± 20 V ID Drain current (continuous) at TC = 25 °C 240 A ID Drain current (continuous) at TC = 100 °C 170 A Drain current (pulsed) 960 A Total dissipation at TC = 25 °C 300 W Derating factor 2.0 W/°C Single pulse avalanche energy 600 mJ IDM (1) PTOT (2) EAS (3) Tstg Storage temperature °C -55 to 175 Tj Operating junction temperature °C 1. Pulse width limited by safe operating area 2. This value is rated according to Rthj-c 3. Starting Tj = 25 °C, ID = 60 A, VDD = 15 V Table 3. Symbol Rthj-case Rthj-pcb (1) Thermal data Parameter Value Unit Thermal resistance junction-case max 0.5 °C/W Thermal resistance junction-pcb max 35 °C/W 1. When mounted on 1 inch² FR-4 2 oz Cu. Doc ID 14595 Rev 2 3/15 Electrical characteristics 2 STV240N75F3 Electrical characteristics (TCASE =25 °C unless otherwise specified) Table 4. Symbol V(BR)DSS Parameter Test conditions Drain-source breakdown voltage ID = 1 mA, VGS= 0 Min. Typ. Max. 75 Unit V IDSS VDS = Max rating, Zero gate voltage drain current (VGS = 0) VDS = Max rating, TC = 125 °C 10 100 µA µA IGSS Gate body leakage current (VDS = 0) ±200 nA 4 V 2.3 2.6 mΩ VDS = ± 20 V VGS(th) Gate threshold voltage VDS= VGS, ID = 250 µA RDS(on) Static drain-source on resistance Table 5. Symbol 4/15 On /off states 2 VGS= 10 V, ID= 120 A Dynamic Parameter Test conditions Min. Typ. Max. Unit - 6800 1100 50 - pF pF pF - 85 30 26 - nC nC nC Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance VDS = 25 V, f = 1 MHz, VGS =0 Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge VDD= 37.5 V, ID= 120 A, VGS= 10 V (see Figure 14) Doc ID 14595 Rev 2 STV240N75F3 Electrical characteristics Table 6. Switching times Symbol Parameter Test conditions Min. Typ. Max Unit td(on) tr Turn-on delay time Rise time VDD = 37.5 V, ID = 60 A RG= 4.7 Ω, VGS= 10 V, (see Figure 13) - 25 70 - ns ns td(off) tf Turn-off delay time Fall time VDD = 37.5 V, ID = 60 A RG= 4.7 Ω, VGS= 10 V, (see Figure 13) - 100 15 - ns ns Min. Typ. Table 7. Source drain diode Symbol Parameter ISD Source-drain current Source-drain current (pulsed) ISD (1) VSD (2) trr Qrr IRRM Test conditions Max. Unit - 240 960 A A 1.5 V Forward on voltage ISD = 120 A, VGS = 0 - Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 120 A, di/dt = 100 A/µs VDD = 20 V, Tj = 150 °C (see Figure 18) - 80 180 4.5 ns nC A 1. Pulse width limited by safe operating area 2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5% Doc ID 14595 Rev 2 5/15 Electrical characteristics STV240N75F3 2.1 Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Thermal impedance AM05544v1 ID (A) Zth_PowerSO-10 K 0.2 s ai are n) his DS(o t R n n i ax m tio era d by p O ite Lim 1000 100 δ=0.5 0.1 -1 10 0.05 0.02 100µs 10 0.01 1ms 10ms Tj=175°C Tc=25°C 1 -2 10 Single pulse Single pulse 0.1 0.1 Figure 4. -3 10 1 VDS(V) Output characteristics Figure 5. AM05545v1 ID (A) 10 -5 10 VGS=10V -4 -3 10 10 tp (s) (6 )$ ! 6$36 6V -1 10 Transfer characteristics 350 300 -2 10 250 200 150 100 5V 50 0 0 Figure 6. 1 2 3 VDS(V) Normalized BVDSS vs temperature Figure 7. 6'36 Static drain-source on resistance AM05546v1 RDS(on) (mΩ) 3.2 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 0 6/15 Doc ID 14595 Rev 2 50 100 150 200 ID(A) STV240N75F3 Figure 8. Electrical characteristics Gate charge vs gate-source voltage Figure 9. Figure 10. Normalized gate threshold voltage vs temperature Capacitance variations Figure 11. Normalized on resistance vs temperature (6 6'3TH NORM )$! 4* # Figure 12. Source-drain diode forward characteristics (6 63$ 6 4* # 4* # 4* # )3$! Doc ID 14595 Rev 2 7/15 Test circuits 3 STV240N75F3 Test circuits Figure 13. Switching times test circuit for resistive load Figure 14. Gate charge test circuit VDD 12V 47kΩ 1kΩ 100nF 3.3 µF 2200 RL µF VGS IG=CONST VDD 100Ω Vi=20V=VGMAX VD RG 2200 µF D.U.T. D.U.T. VG 2.7kΩ PW 47kΩ 1kΩ PW AM01468v1 AM01469v1 Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test switching and diode recovery times circuit A A D.U.T. FAST DIODE B B L A D G VD L=100µH S 3.3 µF B 25 Ω 1000 µF D VDD 2200 µF 3.3 µF VDD ID G RG S Vi D.U.T. Pw AM01470v1 Figure 17. Unclamped inductive waveform AM01471v1 Figure 18. Switching time waveform ton V(BR)DSS tdon VD toff tr tdoff tf 90% 90% IDM 10% ID VDD 10% 0 VDD VDS 90% VGS AM01472v1 8/15 0 Doc ID 14595 Rev 2 10% AM01473v1 STV240N75F3 Test circuits Figure 19. Gate charge test waveform Figure 20. Diode recovery times waveform SC15260 SC15250 Doc ID 14595 Rev 2 9/15 Package mechanical data 4 STV240N75F3 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 10/15 Doc ID 14595 Rev 2 STV240N75F3 Package mechanical data PowerSO-10 MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. MIN. TYP. MAX. A 3.35 3.65 0.132 0.144 A1 0.00 0.10 0.000 0.004 B 0.40 0.60 0.016 0.024 C 0.35 0.55 0.013 0.022 D 9.40 9.60 0.370 0.378 D1 7.40 7.60 0.291 0.300 e 1.27 0.050 E 9.30 9.50 0.366 0.374 E1 7.20 7.40 0.283 0.291 E2 7.20 7.60 0.283 0.300 E3 6.10 6.35 0.240 0.250 E4 5.90 6.10 0.232 0.240 F 1.25 1.35 0.049 h 0.50 H 13.80 14.40 0.543 L 1.20 1.80 0.047 q 1.70 0.567 0.071 0.067 0o α 0.053 0.002 8o B 0.10 A B 10 = = E4 = = E1 = E3 = E2 = E = = = H 6 = = 1 5 B e 0.25 SEATING PLANE DETAIL "A" A C M Q h D = D1 = = = SEATING PLANE A F A1 A1 L DETAIL "A" α 0068039-C Doc ID 14595 Rev 2 11/15 Packaging information STV240N75F3 5 Packaging information 5.1 Tape and reel for PowerSO-10 Table 8. Carrier tape dimensions mm Ref. Note: Min. Typ. Max. A0 14.9 15.0 15.1 B0 9.9 10.0 10.1 K0 4.15 4.25 4.35 F 11.4 11.5 11.6 E 1.65 1.75 1.85 W 23.7 24.0 24.3 P2 1.9 2.0 2.1 P0 3.9 4.0 4.1 P1 23.9 24.0 24.1 T 0.025 0.30 0.35 D(Ø) 1.50 1.55 1.60 10 sprocket hole pitch cumulative tolerance ±0.2 mm. Figure 21. Carrier tape drawing (a) !-V 12/15 Doc ID 14595 Rev 2 STV240N75F3 Packaging information Table 9. Reel dimensions mm Ref. Min. Typ. Max. A 330 B 1.5 C 12.8 D 20.2 N 60 13 G 13.2 24.4 T Note: 30.4 10 sprocket hole pitch cumulative tolerance ±0.2 mm. Figure 22. Reel drawing (b) 4 MMMIN !CCESSHOLE !TSLOTLOCATION " $ # . ! 'MEASURED 4APESLOT )NCOREFOR &ULLRADIUS 4APESTART MMMINWIDTH !THUB !-V Table 10. Base and bulk quantities Base qty. Bulk qty. 600 a. Drawing is not to scale. b. Drawing is not to scale. Doc ID 14595 Rev 2 13/15 Revision history 6 STV240N75F3 Revision history Table 11. 14/15 Document revision history Date Revision Changes 02-Apr-2008 1 Initial release 21-Jan-2010 2 – Document status promoted from preliminary data to datasheet. – Inserted new Section 5: Packaging information. Doc ID 14595 Rev 2 STV240N75F3 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 14595 Rev 2 15/15