STD36NH02L N-channel 24V - 0.011Ω - 30A - DPAK STripFET™ III Power MOSFET General features Type VDSS RDS(on) ID STD36NH02L 24V <0.0145Ω 30A (1) 1. Guaranteed when external Rg=4.7Ω and tf < tfmax ■ RDS(on) * Qg industry’s benchmark ■ Conduction losses reduced ■ Switching losses reduced 3 1 TO-252 Description This series of products utilizes the last advanced design rules of ST’s proprietary STripFET™ technology. This is suitable for the most demanding DC-DC converter application where high efficiency is to be achieved. Internal schematic diagram Applications ■ Switching application Order codes Part number Marking Package Packaging STD36NH02L D36NH02L DPAK Tape & reel April 2006 Rev 1 1/13 www.st.com 13 Contents STD36NH02L Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2/13 ................................................ 8 STD36NH02L 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Symbol Value Unit Drain-source voltage rating 30 V VDS Drain-Source Voltage (V GS = 0) 24 V VGS Gate-Source Voltage ± 20 V ID(2) Drain Current (continuous) at T C = 25°C 30 A ID Drain Current (continuous) at T C=100°C 30 A Drain Current (pulsed) 120 A Total Dissipation at T C = 25°C 45 W Derating Factor 0.27 W/°C Single pulse avalanche energy 200 mJ -55 to 175 °C Value Unit Vspike (1) IDM (3) PTOT EAS (4) TJ Tstg Parameter Operating Junction Temperature Storage Temperature 1. Guaranteed when external Rg=4.7Ω and tf < tfmax 2. Value limited by wire bonding 3. Pulse width limited by safe operating area. 4. Starting Tj=25°C, ID=19A, VDD =18V Table 2. Symbol Thermal resistance Parameter Rthj-case Thermal resistance junction-case Max 3.33 °C/W Rthj-amb Thermal resistance junction-ambient Max 100 °C/W Maximum lead temperature for soldering purpose 275 °C Tl 3/13 Electrical characteristics 2 STD36NH02L Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. Symbol V(BR)DSS On/off states Parameter Drain-source breakdown voltage Test condictions ID = 1mA, VGS= 0 Zero gate voltage drain current (VGS = 0) IGSS Gate body leakage current (VDS = 0) VGS = ±20V VGS(th) Gate Threshold Voltage VDS= V GS, ID = 250µA RDS(on) Static Drain-Source On Resistance VGS= 10V, ID= 15A VGS= 5V, ID= 15A Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd Q OSS (2) RG Max. 24 1 Unit V 1 10 µA µA ±100 nA 1.8 2.5 V 0.011 0.013 0.0145 0.026 Ω Ω Typ. Max. Unit VDS = 20V @125°C Dynamic Parameter Test condictions Min. Forward transconductance VDS =10V, ID = 15A 18 S Input capacitance Output Capacitance Reverse transfer capacitance VDS =15V, f=1 MHz, VGS=0 860 255 45 pF pF pF Total gate charge Gate-source charge Gate-drain charge 0.44V < V DD < 10V, ID = 30A, VGS =10V Output charge VDS=16V, VGS=0 6 ns Gate input resistance f=1 MHz Gate DC Bias = 0 Test signal level = 20mV open drain 3 Ω (see Figure 14) 1. Pulsed: pulse duration=300µs, duty cycle 1.5% 2. Qoss = C oss*∆ VIN, C oss = C gd+C ds 4/13 Typ. VDS = 20V, IDSS Table 4. Min. 15.5 4.1 1.7 20 nC nC nC STD36NH02L Electrical characteristics Table 5. Symbol td(on) tr td(off) tf Table 6. Symbol Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test condictions Min Typ. Max 8 70 22 15 VDD =10V, ID= 15A, RG=4.7Ω, VGS=10V (see Figure 13) Unit ns ns ns ns Source drain diode Max Unit Source-drain current 30 A ISDM(1) Source-drain current (pulsed) 120 A VSD(2) Forward on voltage ISD = 15A, VGS = 0 1.5 V Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 30A,di/dt = 100A/µs, ISD trr Qrr IRRM Parameter Test condictions VDD=15V, Tj=150°C (see Figure 15) Min Typ. 24 16 1.3 ns nC A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300µs, duty cycle 1.5% 5/13 Electrical characteristics STD36NH02L 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance 6/13 STD36NH02L Electrical characteristics Figure 7. Gate charge vs gate-source voltage Figure 8. Figure 9. Normalized gate threshold voltage vs temperature Figure 11. Source-drain diode forward characteristics Capacitance variations Figure 10. Normalized on resistance vs temperature Figure 12. Normalized BVDSS vs temperature 7/13 Test circuit 3 STD36NH02L Test circuit Figure 13. Switching times test circuit for resistive load Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test switching and diode recovery times circuit Figure 17. Unclamped inductive waveform 8/13 Figure 18. Switching time waveform STD36NH02L 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at:: www.st.com 9/13 Package mechanical data STD36NH02L DPAK MECHANICAL DATA mm. inch DIM. MIN. A A1 A2 B b4 C C2 D D1 E E1 e e1 H L (L1) L2 L4 R V2 TYP 2.2 0.9 0.03 0.64 5.2 0.45 0.48 6 MAX. MIN. 2.4 1.1 0.23 0.9 5.4 0.6 0.6 6.2 0.086 0.035 0.001 0.025 0.204 0.017 0.019 0.236 6.6 0.252 5.1 6.4 0.260 0.173 0.368 0.039 2.8 0.8 0.181 0.397 0.110 0.031 1 0.023 0.2 0° 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 0.185 0.090 4.6 10.1 0.6 MAX. 0.200 4.7 2.28 4.4 9.35 1 TYP. 0.039 0.008 8° 0° 8° 0068772-F 10/13 STD36NH02L 5 Packaging mechanical data Packaging mechanical data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 16.4 N 50 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 D 1.5 D1 1.5 E 1.65 MIN. 12.1 0.476 1.6 0.059 0.063 1.85 0.065 0.073 7.4 7.6 0.291 0.299 2.55 2.75 0.100 0.108 0.153 0.161 P0 3.9 4.1 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 40 15.7 MAX. 330 12.992 13.2 0.504 0.520 18.4 0.645 0.724 0.059 0.795 1.968 22.4 0.881 BASE QTY BULK QTY 2500 2500 0.059 F R MIN. MAX. K0 W inch MAX. 1.574 16.3 0.618 0.641 11/13 Revision history 6 STD36NH02L Revision history Table 7. 12/13 Revision history Date Revision 27-Apr-2006 1 Changes First Release STD36NH02L Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 13/13