TC59 Low Dropout, Negative Output Voltage Regulator Features General Description • Low Dropout Voltage - Typically 120mV @ 50mA; 380mV @ 100mA for -5.0V Output Part • Tight Output Voltage Tolerance: ±2% Max • Low Supply Current: 3.5A, Typ • Small Package: 3-Pin SOT-23A The TC59 is a low dropout, negative output voltage regulator designed specifically for battery-operated systems. Its full CMOS construction eliminates the wasted ground current typical of bipolar LDOs. This reduced supply current significantly extends battery life, particularly when the TC59 is operated in dropout. Applications • • • • Cellular Phones Battery Operated Systems Palmtops Portable Cameras Other TC59 key features include low supply current (typically 3.0A) and low dropout operation (typically 120mV at 50mA). The TC59 is packaged in a small 3-Pin SOT-23A package. Functional Block Diagram Device Selection Table 3 Part Number Output Voltage TC593002ECB 3.0V 3-Pin SOT-23A -40°C to +85°C TC595002ECB 5.0V 3-Pin SOT-23A -40°C to +85°C Package VSS Temperature Range Other output voltages are available. Please contact Microchip Technology Inc. for details. TC59 -VOUT _ 1µF Package Type + -VOUT -VIN 1 2 -VIN _ + 1µF 3-Pin SOT-23A VSS 4 TC59 1 2 -VOUT -VIN NOTE: 3-Pin SOT-23A is equivalent to the EIAJ SC59 2001-2012 Microchip Technology Inc. DS21438C-page 1 TC59 1.0 ELECTRICAL CHARACTERISTICS Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operation sections of the specifications is not implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability. Absolute Maximum Ratings* Input Voltage .........................................................-12V Output Current ..................................................200mA Output Voltage..................... -VDD – 0.3V to VIN + 0.3V Power Dissipation.............................................150mW Operating Temperature Range.............-40°C to +85°C Storage Temperature Range ..............-40°C to +125°C TC59 ELECTRICAL SPECIFICATIONS Electrical Characteristics: VIN = VR – 1.0V (Note 1), CL = 10F, TA = 25°C unless otherwise noted. Symbol Parameter Min Typ Max Units VIN Input Voltage — — -10 V IDD Supply Current — 3 7 A IOUT(MAX) Maximum Output Current 100 80 60 — — — — — — mA mA mA VOUT Output Voltage 1.02 X VR — 0.98 x VR TC VOUT Output Voltage Temperature Coefficient — ±100 — VOUT/ (VIN X VOUT) Line Regulation — 0.1 0.3 %/V VOUT Load Regulation — 40 80 mV VIN - VOUT Dropout Voltage — — — — — — 120 380 120 380 120 380 300 600 300 600 300 600 mV mV mV mV mV mV Note 1: V Test Conditions IOUT = 20mA VIN = -6.0V; VR = -5.0V, VOUT -4.5V VIN = -5.0V; VR = -4.0V, VOUT -3.6V VIN = -4.0V; VR = -3.0V, VOUT -2.7V IOUT = 20mA ppm/°C IOUT = 20mA IOUT = 20mA; VR = -5.0V; -6.0 < VIN < -10.0V VR = -4.0V; -5.0 < VIN < -10.0V VR = -3.0V; -4.0 < VIN < -10.0V VR = -5.0V; 1mA < IOUT < 50mA VR = -4.0V; 1mA < IOUT < 45mA VR = -3.0V; 1mA < IOUT < 40mA VR = -5.0V; VR = -4.0V; VR = -3.0V; IOUT = 50mA IOUT = 100mA IOUT = 45mA IOUT = 90mA IOUT = 40mA IOUT = 80mA VR is the regulator output voltage setting. For example: VR = -2.5V, -2.7V, -3.0V, -3.3V, -3.6V, -4.0V, -5.0V. DS21438C-page 2 2001-2012 Microchip Technology Inc. TC59 2.0 PIN DESCRIPTIONS The descriptions of the pins are listed in Table 2-1. TABLE 2-1: PIN FUNCTION TABLE Pin No. (3-Pin SOT-23A) Symbol 1 VOUT 3.0 Description Regulated voltage output. 2 VIN Supply voltage input. 3 VSS Ground. DETAILED DESCRIPTION The TC59 is a low quiescent current, precision fixed negative output voltage LDO. Unlike bipolar linear regulators, the TC59 supply current does not increase proportionally with load current. 3.1 Output Capacitor A minimum of 1F tantalum output capacitor is required. The requirements for the output capacitor are an equivalent series resistance (esr) greater than 0.1 and less than 5, with a self-resonant frequency greater than 1MHz. To improve supply noise rejection and transient response, larger output capacitors can be used. Care should be taken when increasing COUT, that the input impedance is not high enough to cause high input impedance oscillation. 2001-2012 Microchip Technology Inc. 3.2 Input Capacitor A 1F input capacitor is recommended for most applications when the input impedance is on the order of 10. When operating off of a battery input, or there is a large distance from the input source to the LDO, larger input capacitance may be required for stability. When large values of output capacitance are used, the input capacitance should be increased to prevent high source impedance oscillations. DS21438C-page 3 TC59 4.0 THERMAL CONSIDERATIONS 4.1 Power Dissipation EQUATION 4-3: PTOTAL = PD (Pass Device) + PD (Bias) The amount of power dissipated internal to the low drop out linear regulator is the sum of the power dissipation within the linear pass device (P-Channel MOSFET), and the quiescent current required to bias the internal reference and error amplifier. The internal linear pass device power dissipation is calculated multiplying the voltage across the linear device times the current through the device. The input and output voltages are negative for the TC59. The power dissipation is calculated using the absolute value of the voltage difference between the input and output voltage. For the TC59, the internal quiescent bias current is so low (3A typical), the PD (Bias) term of the power dissipation equation can be ignored. The maximum power dissipation can be estimated by using the maximum input voltage and the minimum output voltage to obtain a maximum voltage differential between input and output and multiplying the maximum voltage differential by the maximum output current. EQUATION 4-4: PMAX = (VIN (MAX) – VOUT (MIN)) X IOUT (MAX) TABLE 4-1: MAXIMUM POWER DISSIPATION Package Type Maximum Power Dissipation SOT-23-3 150mW For example, given the following conditions: VIN = -7.0V ±5% VOUT = -5.0V ±2% IOUT = 1mA to 40mA TAMBIENT (MAX) = 55°C EQUATION 4-1: PD (Pass Device) = (VIN – VOUT) X IOUT The internal power dissipation as a result of the bias current for the LDO internal reference and error amplifier is calculated by multiplying the ground or quiescent current times the input voltage. EQUATION 4-2: PD (Bias) = VIN X IGND The total internal power dissipation is the sum of Equation 4-1 and Equation 4-2. PMAX = (7V X (1.05) – (5.0V X 0.98)) X 40mA PMAX = 98.0 milli-Watts To determine the junction temperature of the device, the thermal resistance from junction to air must be known. The SOT-23-3 RJA is estimated to be approximately 359°C/W when mounted on a 4-layer board. The RJA will vary with physical layout, airflow and other application specific conditions. The device junction temperature is determined by calculating the junction temperature rise above ambient, then adding the rise to the ambient temperature. EQUATION 4-5: JUNCTION TEMPERATURE (SOT-23 EXAMPLE) TJUNCTION = PD (MAX) X RJA + TAMBIENT TJUNCTION = 98.0 milli-Watts X 359°C/W + 55°C TJUNCTION = 90.2°C DS21438C-page 4 2001-2012 Microchip Technology Inc. TC59 5.0 Note: TYPICAL CHARACTERISTICS The graphs and tables provided following this note are a statistical summary based on a limited number of samples and are provided for informational purposes only. The performance characteristics listed herein are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified operating range (e.g., outside specified power supply range) and therefore outside the warranted range. 1. OUTPUT VOLTAGE vs. OUTPUT CURRENT TC595002 (-5V) 25°C -5.00 TOPR = -40°C C -4.95 80°C -4.90 -4.85 0 20 40 60 80 TOPR = -40°C C -5 -4 -3 25°C -2 -1 80°C 0 100 OUTPUT CURRENT IOUT (mA) 0 50 100 150 200 OUTPUT CURRENT IOUT (mA) TC594002 (-4V) TC594002 (-4V) VIN = -5.0V -4.05 25°C -4.00 -3.95 TOPR = -40°C 80°C -3.90 -3.85 -3.80 0 20 40 80 60 -3 25°C -2 -1 80°C 0 100 200 50 100 150 OUTPUT CURRENT IOUT (mA) TC593002 (-3V) TC593002 (-3V) 0 VIN = -4.0V -3.05 TOPR = -40°C C -3.00 -2.95 25°C 80°C -2.90 -2.85 -2.80 0 TOPR = -40°C C -4 OUTPUT CURRENT IOUT (mA) -3.10 20 40 60 80 OUTPUT CURRENT IOUT (mA) 2001-2012 Microchip Technology Inc. 100 250 VIN = -5.0V -5 OUTPUT VOLTAGE VOUT (V) OUTPUT VOLTAGE VOUT (V) OUTPUT VOLTAGE VOUT (V) -5.05 -4.10 OUTPUT VOLTAGE VOUT (V) VIN = -6.0V -6 250 VIN = -4.0V -4 OUTPUT VOLTAGE VOUT (V) OUTPUT VOLTAGE VOUT (V) -5.10 -4.80 TC595002 (-5V) VIN = -6.0V TOPR = -40°C C -3 25°C -2 -1 80°C 0 0 50 200 250 100 150 OUTPUT CURRENT IOUT (mA) DS21438C-page 5 TC59 5.0 TYPICAL CHARACTERISTICS (CONTINUED) 2. OUTPUT VOLTAGE vs. INPUT VOLTAGE TC595002 (-5.0V) TC595002 (-5.0V) TOPR = 25°C OUTPUT VOLTAGE VOUT (V) OUTPUT VOLTAGE VOUT (V) -5.0 IOUT = 1mA A -4.8 40mA 20mA -4.6 -4.4 TOPR = 25°C -5.10 -5.2 IOUT = 1mA -5.05 -5.00 40mA 20mA -4.95 -4.90 -4.85 -4.2 -4.5 -5.0 INPUT VOLTAGE VIN (V) -5 -5.5 -6 TOPR = 25°C IOUT = 1mA -3.8 20mA -3.6 40mA A -3.4 -10 -4.05 IOUT = 1mA -4.00 40mA 20mA -3.95 -3.90 -3.85 -3.2 -3.5 -4.0 -4 -4.5 -5 INPUT VOLTAGE VIN (V) TOPR = 25°C -3.0 IOUT = 1mA -2.8 -2.6 -2.4 -2.2 -2.5 -10 20mA 40mA TOPR = 25°C -3.10 OUTPUT VOLTAGE VOUT (V) -3.2 -6 -7 -8 -9 INPUT VOLTAGE VIN (V) TC593002 (-3.0V) TC593002 (-3.0V) OUTPUT VOLTAGE VOUT (V) -9 TOPR = 25°C -4.10 OUTPUT VOLTAGE VOUT (V) OUTPUT VOLTAGE VOUT (V) -4.0 -3.05 IOUT = 1mA -3.00 40mA 20mA -2.95 -2.90 -2.85 -3.0 INPUT VOLTAGE VIN (V) DS21438C-page 6 -8 TC594002 (-4.0V) TC594002 (-4.0V) -4.2 -7 INPUT VOLTAGE VIN (V) -3.5 -3 -4 -5 -6 -7 -8 -9 -10 INPUT VOLTAGE VIN (V) 2001-2012 Microchip Technology Inc. TC59 5.0 TYPICAL CHARACTERISTICS (CONTINUED) 3. INPUT/OUTPUT VOLTAGE DIFFERENTIAL vs. OUTPUT CURRENT TC595002 (-4.0V) INPUT/OUTPUT VOLTAGE DIFF. VDIF (V) INPUT/OUTPUT VOLTAGE DIFF. VDIF (V) TC595002 (-5.0V) 800 600 400 TOPR = 25°C 80°C 200 -40°C 0 0 40 20 60 800 600 400 TOPR = 25°C C 80°C 200 -40°C 0 0 100 80 IOUT (mA) 20 40 60 80 100 OUTPUT CURRENT IOUT (mA) INPUT/OUTPUT VOLTAGE DIFF. VDIF (V) TC595002 (-3.0V) 800 600 400 TOPR = 25°C 200 80°C -40°C 0 0 80 20 40 60 OUTPUT CURRENT IOUT (mA) 100 4. SUPPLY CURRENT vs. INPUT VOLTAGE TC595002 (-5.0V) TC595002 (-5.0V) 4.0 SUPPLY CURRENT ISS (µA) SUPPLY CURRENT ISS (µA) 5 4 TOPR = 25°C 80°C 3 2 -40°C 1 0 0 -4 -2 -6 -8 INPUT VOLTAGE VIN (V) 2001-2012 Microchip Technology Inc. 3.5 3.0 2.5 TOPR = 25°C 2.0 -40°C 1.5 1.0 -10 80°C -5 -6 -7 -8 -9 -10 INPUT VOLTAGE VIN (V) DS21438C-page 7 TC59 5.0 TYPICAL CHARACTERISTICS (CONTINUED) 4. SUPPLY CURRENT vs. INPUT VOLTAGE (CONTINUED) TC594002 (-4.0V) TC594002 (-4.0V) 4.0 SUPPLY CURRENT ISS (µA) SUPPLY CURRENT ISS (µA) 5 4 TOPR = 25°C 80°C 3 2 -40°C 1 0 0 -2 -4 -6 -8 3.5 3.0 2.5 2.0 -40°C 1.5 1.0 -10 -4 -5 INPUT VOLTAGE VIN (V) -6 -7 -9 -8 -10 INPUT VOLTAGE VIN (V) TC593002 (-3.0V) TC593002 (-3.0V) 5 4.0 SUPPLY CURRENT ISS (µA) SUPPLY CURRENT ISS (µA) TOPR = 25°C 80°C 4 TOPR = 25°C 3 80°C 2 -40°C 1 0 3.5 3.0 80°C TOPR = 25°C 2.5 2.0 -40°C 1.5 1.0 0 -2 -4 -6 -8 -10 -3 INPUT VOLTAGE VIN (V) -6 -5 -4 -7 -9 -8 -10 INPUT VOLTAGE VIN (V) 5. OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE TC594002 (-4.0V) VIN = -6.0V -5.10 -5.05 20mA IOUT = 1mA -5.00 40mA -4.95 -4.90 -4.85 -40 DS21438C-page 8 -20 0 20 40 60 AMBIENT TEMP. TOPR (°C) 80 VIN = -6.0V -4.10 OUTPUT VOLTAGE VOUT (V) OUTPUT VOLTAGE VOUT (V) TC595002 (-5.0V) -4.05 IOUT = 1mA 20mA -4.00 40mA -3.95 -3.90 -3.85 -40 -20 0 20 40 60 80 AMBIENT TEMP. TOPR (°C) 2001-2012 Microchip Technology Inc. TC59 5.0 TYPICAL CHARACTERISTICS (CONTINUED) 5. OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE (CONTINUED) TC593002 (-3.0V) VIN = -6.0V OUTPUT VOLTAGE VOUT (V) -3.10 -3.05 20mA IOUT = 1mA -3.00 40mA -2.95 -2.90 -2.85 -40 -20 0 20 40 60 80 AMBIENT TEMP. TOPR (°C) 6. SUPPLY CURRENT vs. AMBIENT TEMPERATURE TC595002 (-5.0V) TC594002 (-4.0V) 5 SUPPLY CURRENT ISS (µA) SUPPLY CURRENT ISS (µA) 5 4 VIN = -10V 3 2 -6V 1 0 -40 -20 0 20 40 60 AMBIENT TEMP. TOPR (°C) 80 4 3 VIN = -10V 2 -5V 1 0 -40 -20 0 20 40 60 80 AMBIENT TEMP. TOPR (°C) TC593002 (-3.0V) SUPPLY CURRENT ISS (µA) 5 4 3 VIN = -10V 2 -4V 1 0 -40 -20 0 20 40 60 80 AMBIENT TEMP. TOPR (°C) 2001-2012 Microchip Technology Inc. DS21438C-page 9 TC59 5.0 TYPICAL CHARACTERISTICS (CONTINUED) 7. INPUT TRANSIENT RESPONSE -8 -2 Output Voltage -6 -4 -2 0 -6 -4 -2 0 -4 -2 0 TIME (2 msec/div) INPUT VOLTAGE VIN (V) IOUT = 100mA, CIN L µF, TOPR = 25°C -8 Input Voltage -6 -4 -2 Output O utput Voltage -6 -4 -2 0 OUTPUT VOLTAGE VOUT (V) TIME (2 msec/div) 0 Output O utput Voltage OUTPUT VOLTAGE VOUT (V) -4 0 IOUT = 50mA, CIN, CL = 1µF, TOPR = 25°C Input Voltage Input Voltage INPUT VOLTAGE VIN (V) INPUT VOLTAGE VIN (V) -6 IOUT = 1mA, CIN, CL = 1µF, TOPR = 25°C OUTPUT VOLTAGE VOUT (V) -8 TIME (2 msec/div) TC594002 (-4.0V) TC594002 (-4.0V) IOUT = 50mA, CIN, CL = 1µF, TOPR = 25°C -8 Input Voltage -4 -2 0 -6 Output Voltage -4 -2 0 TIME (2 msec/div) DS21438C-page 10 INPUT VOLTAGE VIN(V) INPUT VOLTAGE VIN (V) -6 OUTPUT VOLTAGE VOUT (V) -8 -6 Input Voltage -4 -2 0 Output Voltage -4 -2 0 OUTPUT VOLTAGE VOUT (V) IOUT = 1mA, CIN, CL = 1µF, TOPR = 25°C TIME (2 msec/div) 2001-2012 Microchip Technology Inc. TC59 5.0 TYPICAL CHARACTERISTICS (CONTINUED) 7. INPUT TRANSIENT RESPONSE (CONT.) TC594002 (-4.0V) TC593002 (-3.0V) -2 0 Output Voltage -4 -2 -6 -4 Input Voltage -2 0 Output Voltage -2 0 0 TIME (2 msec/div) -4 -2 0 Output Voltage -4 -2 IOUT = 100mA, CIN, CL = 1µF, TOPR = 25°C -8 INPUT VOLTAGE VIN (V) INPUT VOLTAGE VIN (V) Input Voltage OUTPUT VOLTAGE VOUT (V) IOUT = 50mA, CIN, CL = 1µF, TOPR = 25°C -6 Input Voltage -4 -2 0 Output O utput Voltage -2 0 0 TIME (2 msec/div) 2001-2012 Microchip Technology Inc. -4 OUTPUT VOLTAGE VOUT (V) TIME (2 msec/div) -8 -6 -4 OUTPUT VOLTAGE VOUT (V) Input Voltage -4 -8 INPUT VOLTAGE VIN (V) INPUT VOLTAGE VIN (V) -6 IOUT = 1mA, CIN, CL = 1µF, TOPR = 25°C OUTPUT VOLTAGE VOUT (V) IOUT = 100mA, CIN, CL = 1µF, TOPR = 25°C -8 TIME (2 msec/div) DS21438C-page 11 TC59 5.0 TYPICAL CHARACTERISTICS (CONTINUED) 8. LOAD TRANSIENT RESPONSE 200 Output Voltage -5.0 150 -4.5 100 -4.0 50 -3.5 1mA 10mA Output Current OUTPUT VOLTAGE VOUT (V) -5.5 -6.0 250 OUTPUT CURRENT IOUT (mA) OUTPUT VOLTAGE VOUT (V) -6.0 TC595002 (-5.0V) 0 VIN = -6.0V, CIN, CL = 1µF, TOPR = 25°C -5.5 250 200 Output Voltage -5.0 150 -4.5 100 50mA Output Current -4.0 -3.5 50 1mA TIME (2 msec/div) OUTPUT CURRENT IOUT (mA) TC595002 (-5.0V) VIN = -6.0V, CIN, CL = 1µF, TOPR = 25°C 0 TIME (2 msec/div) TC595002 (-5.0V) -6.0 250 -5.5 200 Output Voltage 150 -5.0 100mA -4.5 Output Current 50 -4.0 -3.5 100 1mA OUTPUT CURRENT IOUT (mA) OUTPUT VOLTAGE VOUT (V) VIN = -6.0V, CIN, CL = 1µF, TOPR = 25°C 0 TIME (2 msec/div) 200 Output Voltage -5.0 150 -4.5 100 -4.0 50 -3.5 1mA 10mA Output Current 0 TIME (2 msec/div) DS21438C-page 12 OUTPUT VOLTAGE VOUT (V) -5.5 -6.0 250 OUTPUT CURRENT IOUT (mA) OUTPUT VOLTAGE VOUT (V) -6.0 TC594002 (-5.0V) VIN = -5.0V, CIN, CL = 1µF, TOPR = 25°C -5.5 250 200 Output Voltage -5.0 150 -4.5 100 50mA Output Current -4.0 -3.5 1mA 50 OUTPUT CURRENT IOUT (mA) TC594002 (-4.0V) VIN = -5.0V, CIN, CL = 1µF, TOPR = 25°C 0 TIME (2 msec/div) 2001-2012 Microchip Technology Inc. TC59 5.0 TYPICAL CHARACTERISTICS (CONTINUED) 8. LOAD TRANSIENT RESPONSE (CONT.) TC594002 (-4.0V) -5.5 250 200 Output Voltage 150 -5.0 100mA Output Current -4.5 100 -4.0 50 -3.5 1mA OUTPUT CURRENT IOUT (mA) OUTPUT VOLTAGE VOUT (V) -6.0 VIN = -5.0V, CIN, CL = 1µF, TOPR = 25°C 0 TIME (2msec/div) 200 Output Voltage -5.0 150 -4.5 100 -4.0 50 -3.5 1mA 10mA Output Current 0 OUTPUT VOLTAGE VOUT (V) -5.5 -6.0 250 OUTPUT CURRENT IOUT (mA) OUTPUT VOLTAGE VOUT (V) -6.0 TC593002 (-3.0V) -5.5 250 200 Output Voltage -5.0 150 -4.5 100 50mA Output Current 50 -4.0 -3.5 TIME (2 msec/div) VIN = -4.0V, CIN, CL = 1µF, TOPR = 25°C 1mA OUTPUT CURRENT IOUT (mA) TC593002 (-3.0V) VIN = -4.0V, CIN, CL = 1µF, TOPR = 25°C 0 TIME (2 msec/div) TC593002 (-3.0V) -6.0 250 -5.5 200 Output Voltage -5.0 150 100mA Output Current -4.5 100 -4.0 50 -3.5 1mA OUTPUT CURRENT IOUT (mA) OUTPUT VOLTAGE VOUT (V) VIN = -4.0V, CIN, CL = 1µF, TOPR = 25°C 0 TIME (2 msec/div) 2001-2012 Microchip Technology Inc. DS21438C-page 13 TC59 5.0 TYPICAL CHARACTERISTICS (CONTINUED) 9. RIPPLE REJECTION RATE 60 TC595002 (-5.0V) RIPPLE REJECTION RATE RR (dB) RIPPLE REJECTION RATE RR (dB) TC595002 (-5.0V) VIN = -6.0VDC + 1VP-PAC, CL = 1µF IOUT = 20mA, TOPR = 25°C 50 40 30 20 10 0 0.01 0.1 1 10 RIPPLE FREQUENCY (kHz) 60 VIN = -6.0VDC + 1VP-PAC, CL = 1µF IOUT = 20mA, TOPR = 25°C 50 40 30 20 10 0 0.01 0.1 1 10 RIPPLE FREQUENCY (kHz) RIPPLE REJECTION RATE RR (dB) TC595002 (-5.0V) 60 VIN = -6.0VDC + 1VP-PAC, CL = 1µF IOUT = 20mA, TOPR = 25°C 50 40 30 20 10 0 0.01 0.1 1 10 RIPPLE FREQUENCY (kHz) DS21438C-page 14 2001-2012 Microchip Technology Inc. TC59 6.0 PACKAGING INFORMATION 6.1 Package Marking Information 2 3 1 6.2 represents first integer of output voltage 3 represents first decimal of output voltage Symbol Voltage Symbol Voltage A B C D E .0 .1 .2 .3 .4 F H K L M .5 .6 .7 .8 .9 represents voltage polarity Symbol Voltage Symbol Polarity 0 1 2 3 4 5 6 7 8 9 0. 1. 2. 3. 4. 5. 6. 7. 8. 9. 5 – 4 represents assembly lot code Taping Form Component Taping Orientation for 3-Pin SOT-23A (EIAJ SC-59) Devices User Direction of Feed Device Marking W PIN 1 P Standard Reel Component Orientation for TR Suffix Device (Mark Right Side Up) Carrier Tape, Number of Components Per Reel and Reel Size Package 3-Pin SOT-23A 2001-2012 Microchip Technology Inc. Carrier Width (W) Pitch (P) Part Per Full Reel Reel Size 8 mm 4 mm 3000 7 in DS21438C-page 15 TC59 6.3 Package Dimensions Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging SOT-23A-3 .020 (0.50) .012 (0.30) .071 (1.80) .055 (1.40) .118 (3.00) .098 (2.50) PIN 1 .075 (1.90) REF. .122 (3.10) .106 (2.70) .051 (1.30) .035 (0.90) .010 (0.25) .004 (0.09) 10° MAX. .006 (0.15) .000 (0.00) .022 (0.55) .014 (0.35) Dimensions: inches (mm) 7.0 REVISION HISTORY Revision C (December 2012) Added a note to the package outline drawing. DS21438C-page 16 2001-2012 Microchip Technology Inc. TC59 PRODUCT IDENTIFICATION SYSTEM To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. PART CODE TC59 TC59 30 50 02 02 ECB ECB XX XX Output Voltage: 50 = -5.0V; 30 = -3.0V Tolerance: 02 = 2% Temperature/Package: -40°C to +85°C 3-Pin SOT-23A Taping Direction: TR: Standard Taping Sales and Support Data Sheets Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences and recommended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following: 1. 2. Your local Microchip sales office The Microchip Worldwide Site (www.microchip.com) Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using. New Customer Notification System Register on our web site (www.microchip.com/cn) to receive the most current information on our products. 2001-2012 Microchip Technology Inc. DS21438C-page17 TC59 NOTES: DS21438C-page18 2001-2012 Microchip Technology Inc. Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights. Trademarks The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, PIC32 logo, rfPIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MTP, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries. Analog-for-the-Digital Age, Application Maestro, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE, rfLAB, Select Mode, SQI, Serial Quad I/O, Total Endurance, TSHARC, UniWinDriver, WiperLock, ZENA and Z-Scale are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. GestIC and ULPP are registered trademarks of Microchip Technology Germany II GmbH & Co. & KG, a subsidiary of Microchip Technology Inc., in other countries. All other trademarks mentioned herein are property of their respective companies. © 2001-2012, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. ISBN: 9781620768228 QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV == ISO/TS 16949 == 2001-2012 Microchip Technology Inc. Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. DS21438C-page 19 Worldwide Sales and Service AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://www.microchip.com/ support Web Address: www.microchip.com Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon Hong Kong Tel: 852-2401-1200 Fax: 852-2401-3431 India - Bangalore Tel: 91-80-3090-4444 Fax: 91-80-3090-4123 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 India - Pune Tel: 91-20-2566-1512 Fax: 91-20-2566-1513 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Japan - Osaka Tel: 81-6-6152-7160 Fax: 81-6-6152-9310 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Cleveland Independence, OH Tel: 216-447-0464 Fax: 216-447-0643 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Farmington Hills, MI Tel: 248-538-2250 Fax: 248-538-2260 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Santa Clara Santa Clara, CA Tel: 408-961-6444 Fax: 408-961-6445 Toronto Mississauga, Ontario, Canada Tel: 905-673-0699 Fax: 905-673-6509 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 China - Beijing Tel: 86-10-8569-7000 Fax: 86-10-8528-2104 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 China - Chongqing Tel: 86-23-8980-9588 Fax: 86-23-8980-9500 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 China - Hangzhou Tel: 86-571-2819-3187 Fax: 86-571-2819-3189 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 China - Hong Kong SAR Tel: 852-2943-5100 Fax: 852-2401-3431 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 Taiwan - Hsin Chu Tel: 886-3-5778-366 Fax: 886-3-5770-955 China - Shenzhen Tel: 86-755-8864-2200 Fax: 86-755-8203-1760 Taiwan - Kaohsiung Tel: 886-7-213-7828 Fax: 886-7-330-9305 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 Taiwan - Taipei Tel: 886-2-2508-8600 Fax: 886-2-2508-0102 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 UK - Wokingham Tel: 44-118-921-5869 Fax: 44-118-921-5820 China - Xiamen Tel: 86-592-2388138 Fax: 86-592-2388130 China - Zhuhai Tel: 86-756-3210040 Fax: 86-756-3210049 DS21438C-page 20 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Japan - Tokyo Tel: 81-3-6880- 3770 Fax: 81-3-6880-3771 11/29/12 2001-2012 Microchip Technology Inc.