BFL4026 Ordering number : ENA1797A SANYO Semiconductors DATA SHEET N-Channel Silicon MOSFET BFL4026 General-Purpose Switching Device Applications Features • • ON-resistance RDS(on)=2.8Ω (typ.) 10V drive • Input capacitance Ciss=650pF (typ.) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Drain-to-Source Voltage Conditions Ratings VDSS VGSS Gate-to-Source Voltage Unit 900 V ±30 V 5 A IDc*1 Limited only by maximum temperature Tch=150°C IDpack*2 Tc=25°C (SANYO’s ideal heat dissipation condition)*3 3.5 A Drain Current (Pulse) IDP PW≤10μs, duty cycle≤1% 10 A Allowable Power Dissipation PD 2.0 W Channel Temperature Drain Current (DC) 35 W Tch 150 °C Storage Temperature Tstg --55 to +150 °C Avalanche Energy (Single Pulse) *4 EAS IAV 132 mJ Avalanche Current *5 Tc=25°C (SANYO’s ideal heat dissipation condition)*3 5 A Note : *1 Shows chip capability *2 Package limited *3 SANYO’s condition is radiation from backside. The method is applying silicone grease to the backside of the device and attaching the device to water-cooled radiator made of aluminium. *4 VDD=50V, L=10mH, IAV=5A (Fig.1) *5 L≤10mH, single pulse Package Dimensions Product & Package Information unit : mm (typ) 7528-001 • Package : TO-220F-3FS • JEITA, JEDEC : SC-67 • Minimum Packing Quantity : 50 pcs./magazine 4.7 10.16 3.18 BFL4026-1E Marking Electrical Connection 2 FL4026 3.23 LOT No. 1 2.76 12.98 15.8 15.87 6.68 3.3 2.54 1.47 MAX 3 0.8 1 2.54 2 3 0.5 2.54 1 : Gate 2 : Drain 3 : Source SANYO : TO-220F-3FS http://semicon.sanyo.com/en/network 71112 TKIM/70710QB TKIM TC-00002399 No.A1797-1/7 BFL4026 Electrical Characteristics at Ta=25°C Parameter Symbol Ratings Conditions Drain-to-Source Breakdown Voltage V(BR)DSS Zero-Gate Voltage Drain Current IDSS ID=10mA, VGS=0V VDS=720V, VGS=0V Gate-to-Source Leakage Current IGSS VGS=±30V, VDS=0V Cutoff Voltage VGS(off) Forward Transfer Admittance | yfs | VDS=10V, ID=1mA VDS=20V, ID=2.5A Static Drain-to-Source On-State Resistance RDS(on) ID=2.5A, VGS=10V Input Capacitance Ciss min typ Unit max 900 V 1.0 mA ±100 nA 2.0 4.0 1.4 2.8 V S 2.8 3.6 Ω 650 pF Output Capacitance Coss 100 pF Reverse Transfer Capacitance Crss 35 pF Turn-ON Delay Time td(on) 14 ns Rise Time tr 37 ns Turn-OFF Delay Time td(off) Fall Time tf Total Gate Charge Qg Gate-to-Source Charge Qgs Gate-to-Drain “Miller” Charge Qgd Diode Forward Voltage VSD IS=5A, VGS=0V 0.85 Reverse Recovery Time trr See Fig.3 720 ns Reverse Recovery Charge Qrr IS=5A, VGS=0V, di/dt=100A/μs 4700 nC VDS=30V, f=1MHz See Fig.2 VDS=200V, VGS=10V, ID=5A ≥50Ω RG 10V 0V ns 33 nC 5.3 nC nC 1.2 V Fig.2 Switching Time Test Circuit 10V 0V L VIN VDD=200V ID=2.5A RL=80Ω VIN G S ns 39 16.5 Fig.1 Avalanche Resistance Test Circuit D 117 D BFL4026 VDD 50Ω VOUT PW=10μs D.C.≤0.5% G BFL4026 P.G RGS=50Ω S Fig.3 Reverse Recovery Time Test Circuit BFL4026 D 500μH G S VDD=50V Driver MOSFET Ordering Information Device BFL4026-1E Package Shipping memo TO-220F-3FS 50pcs./magazine Pb Free No.A1797-2/7 BFL4026 ID -- VDS VDS=20V 9 7V 6 6V 4 3 2 5V VGS=4V 5 10 15 20 25 30 35 40 45 Drain-to-Source Voltage, VDS -- V 4 3 25°C 2 --25°C 1 3 4 5 6 7 8 9 10 11 12 13 7 5 7 5 3 2 0.1 7 2 3 5 7 0.1 2 3 5 7 1.0 2 3 SW Time -- ID 7 =1 S 4 VG 3 2 1 --25 0 25 50 75 100 125 150 IT15764 IS -- VSD VGS=0V Single pulse 3 2 1.0 7 5 3 2 0.1 7 5 100 7 5 tf 3 tr 2 td(on) 0.8 1.0 1.2 IT15766 f=1MHz 3 2 Ciss, Coss, Crss -- pF td (off) 0.6 Ciss, Coss, Crss -- VDS 5 3 2 0.4 Diode Forward Voltage, VSD -- V VDD=200V VGS=10V 5 Switching Time, SW Time -- ns .5A =2 ID , 0V 5 0.01 0.2 5 7 10 IT15765 Drain Current, ID -- A 1000 7 5 Ciss 3 2 Co ss 100 7 5 Cr ss 3 2 10 7 0.1 6 3 2 5 3 0.01 7 10 7 5 5°C --2 = Tc °C 75 1.0 12 IT15762 8 2 °C 25 2 10 Case Temperature, Tc -- °C VDS=20V 3 8 Single pulse IT15763 | yfs | -- ID 6 RDS(on) -- Tc 0 --50 15 Source Current, IS -- A Forward Transfer Admittance, | yfs | -- S Gate-to-Source Voltage, VGS -- V 14 4 Gate-to-Source Voltage, VGS -- V Static Drain-to-Source On-State Resistance, RDS(on) -- Ω Static Drain-to-Source On-State Resistance, RDS(on) -- Ω Tc=75°C 2 2 9 6 5 0 10 7 0 0 50 ID=2.5A Single pulse 8 2 IT15761 RDS(on) -- VGS 9 3 5°C 0 75°C 4 1 1 0 25°C 5 --25° C 5 6 25°C 7 Tc= --25°C Drain Current, ID -- A Drain Current, ID -- A 7 15V 10V 8 ID -- VGS 8 Tc=25°C Tc= 7 10 2 3 5 7 1.0 2 Drain Current, ID -- A 3 5 7 10 IT15767 10 0 5 10 15 20 25 30 35 40 Drain-to-Source Voltage, VDS -- V 45 50 IT15768 No.A1797-3/7 BFL4026 VGS -- Qg 10 Drain Current, ID -- A Gate-to-Source Voltage, VGS -- V 5 4 1 3 2 5 10 15 20 25 30 35 Total Gate Charge, Qg -- nC 0.5 40 60 80 100 120 140 Ambient Temperature, Ta -- °C 160 IT15771 EAS -- Ta 120 5 7 1.0 2 3 5 7 10 2 3 5 7100 2 3 Drain-to-Source Voltage, VDS -- V Allowable Power Dissipation, PD -- W 1.0 20 2 3 PD -- Tc 40 1.5 0 *1. Shows chip capability *2. SANYO's ideal heat dissipation condition Tc=25°C Single pulse 0.01 0.1 40 2.0 0 Operation in this area is limited by RDS(on). IT15769 PD -- Ta 2.5 Allowable Power Dissipation, PD -- W 3 2 2 0 1m s IDpack(*2)=3.5A 1.0 7 5 0.1 7 5 3 0 Avalanche Energy derating factor -- % 3 2 s 0μ 6 IDc(*1)=5A s m n 10 ms atio 0 r 10 ope DC 7 IDP=10A (PW≤10μs) 10 8 10 7 5 μs 10 9 ASO 2 VDS=200V ID=5A 5 71000 2 IT15770 35 30 25 20 15 10 5 0 0 20 40 60 80 100 120 Case Temperature, Tc -- °C 140 160 IT15772 100 80 60 40 20 0 0 25 50 75 100 125 Ambient Temperature, Ta -- °C 150 175 IT10478 No.A1797-4/7 BFL4026 Magazine Specification BFL4026-1E No.A1797-5/7 BFL4026 Outline Drawing BFL4026-1E Mass (g) Unit 1.8 mm * For reference No.A1797-6/7 BFL4026 Note on usage : Since the BFL4026 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of July, 2012. Specifications and information herein are subject to change without notice. PS No. A1797-7/7