2SK3748 Ordering number : EN8250B SANYO Semiconductors DATA SHEET N-Channel Silicon MOSFET 2SK3748 High-Voltage, High-Speed Switching Applications Features • • • • Low ON-resistance, low input capacitance, ultrahigh-speed switching High reliability (Adoption of HVP process) Attachment workability is good by Mica-less package Avalanche resistance guarantee Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Drain-to-Source Voltage Conditions Ratings VDSS VGSS Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) ID* IDP Allowable Power Dissipation PD Unit 1500 V ±20 V PW≤10μs, duty cycle≤1% Tc=25°C 4 A 8 A 3.0 W 65 W Channel Temperature Tch 150 °C Storage Temperature Tstg --55 to +150 °C Avalanche Energy (Single Pulse) *1 EAS IAV 165 mJ Avalanche Current *2 4 A *Shows chip capability *1 VDD=50V, L=20mH, IAV=4A (Fig.1) *2 L≤20mH, single pulse Package Dimensions Product & Package Information unit : mm (typ) 7538A-002 • Package : TO-3PF-3L • JEITA, JEDEC : SC-94 • Minimum Packing Quantity : 30 pcs./magazine 2SK3748-1E 5.5 4.5 15.5 Marking 3.0 Electrical Connection 10.0 3.6 3.5 2.0 5.0 25.0 24.5 2 K3748 2.0 2.0 19.3 LOT No. 4.0 0.75 2 5.45 0.9 3 3 3.3 1 1 2.0 5.45 1 : Gate 2 : Drain 3 : Source SANYO : TO-3PF-3L http://semicon.sanyo.com/en/network 52312 TKIM TC-00002764/72905 MSIM TB-00001688 / 31005QB TSIM TB-00001272 No.8250-1/7 2SK3748 Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage V(BR)DSS Zero-Gate Voltage Drain Current IDSS Conditions Ratings min typ Unit max 1500 ID=1mA, VGS=0V VDS=1200V, VGS=0V Gate-to-Source Leakage Current IGSS Cutoff Voltage VGS(off) VGS=16V, VDS=0V VDS=10V, ID=1mA 2.5 Forward Transfer Admittance | yfs | VDS=20V, ID=2A 1.7 Static Drain-to-Source On-State Resistance RDS(on) ID=2A, VGS=10V Input Capacitance Ciss V 100 μA ±10 μA 3.5 2.8 V S 5 7 790 Ω pF Output Capacitance Coss 140 pF Reverse Transfer Capacitance Crss 70 pF Turn-ON Delay Time td(on) tr 17 ns 75 ns 360 ns Rise Time Turn-OFF Delay Time Fall Time td(off) tf Total Gate Charge Qg Gate-to-Source Charge Qgs Gate-to-Drain “Miller” Charge Qgd Diode Forward Voltage VSD trr Reverse Recovery Time Fig.1 Avalanche Resistance Test Circuit VDS=30V, f=1MHz See Fig.2 VDS=200V, VGS=10V, ID=4A IS=4A, VGS=0V IS=4A, VGS=0V, dis/dt=100A/μs ns 80 nC 6.4 nC 36 nC 0.94 D VOUT PW=10μs D.C.≤0.5% V ns L ≥50Ω RG ID=2A RL=100Ω VIN 1.2 340 Fig.2 Switching Time Test Circuit VDD 200V VIN 10V 0V 116 2SK3748 10V 0V VDD 50Ω G 2SK3748 P.G RGS 50Ω S Ordering Information Device 2SK3748-1E Package Shipping memo TO-3PF-3L 30pcs./magazine Pb Free No.8250-2/7 2SK3748 ID -- VDS 8 VDS=20V 8V 10V 7 6 Tc= --25°C 6V 6 Drain Current, ID -- A Drain Current, ID -- A ID -- VGS 7 Tc=25°C 5 5V 4 3 2 VGS=4V 1 5 25°C 4 3 75°C 2 1 0 0 0 10 20 30 40 50 60 Drain-to-Source Voltage, VDS -- V 70 0 4 6 8 10 12 14 16 Gate-to-Source Voltage, VGS -- V RDS(on) -- VGS 14 2 IT09205 Static Drain-to-Source On-State Resistance, RDS(on) -- Ω ID=2A VGS=10V Tc=75°C 8 6 25°C 4 --25°C 2 2 4 6 8 10 12 14 16 Gate-to-Source Voltage, VGS -- V | yfs | -- ID 4 2 --25 0 25 50 75 100 125 7 5 3 2 150 IT09208 IS -- VSD VGS=0V 10 7 5 1.0 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 2 3 5 7 2 1.0 Drain Current, ID -- A 3 5 7 td(off) 5 0.3 0.6 0.9 1.2 Diode Forward Voltage, VSD -- V 1.5 IT09210 Ciss, Coss, Crss -- VDS 10000 7 5 VDD=200V VGS=10V 7 0 IT09209 SW Time -- ID 1000 f=1MHz 3 2 Ciss, Coss, Crss -- pF 3 2 tf 100 7 5 tr 3 td(on) 2 10 0.1 6 2 °C --25 Tc= C 75° 2 8 Case Temperature, Tc -- °C C 25° 3 10 IT09207 VDS=20V 5 0.1 0.1 Switching Time, SW Time -- ns 20 Source Current, IS -- A Forward Transfer Admittance, | yfs | -- S 7 18 12 0 --50 0 0 14 Tc= 75°C 25°C --25°C Static Drain-to-Source On-State Resistance, RDS(on) -- Ω 10 20 IT09206 RDS(on) -- Tc 16 ID=2A 12 18 1000 7 5 Ciss 3 2 Coss Crss 100 7 5 3 2 10 2 3 5 7 1.0 Drain Current, ID -- A 2 3 IT09211 0 5 10 15 20 25 30 35 40 Drain-to-Source Voltage, VDS -- V 45 50 IT09212 No.8250-3/7 2SK3748 VGS -- Qg 10 8 10 7 5 7 3 2 Drain Current, ID -- A Gate-to-Source Voltage, VGS -- V 9 6 5 4 3 1 3 2 10 20 30 40 50 60 70 Total Gate Charge, Qg -- nC 90 1m s 1 10 0ms DC 0ms op er ati on Tc=25°C Single pulse 2 3 5 7 10 Allowable Power Dissipation, PD -- W 2.0 1.5 1.0 0.5 3 5 7 100 2 3 5 7 1000 2 3 IT16890 PD -- Tc 80 2.5 2 Drain-to-Source Voltage, VDS -- V IT09213 3.0 μs 0μ s Operation in this area is limited by RDS(on). 0.01 1.0 PD -- Ta 3.5 Allowable Power Dissipation, PD -- W 80 10 ID=4A 3 2 2 0 10 IDP=8A(PW≤10μs) 1.0 7 5 0.1 7 5 0 ASO 2 VDS=200V ID=4A 70 65 60 50 40 30 20 10 0 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT09215 0 20 40 60 80 100 120 Case Temperature, Tc -- °C 140 160 IT09216 No.8250-4/7 2SK3748 Magazine Specification 2SK3748-1E No.8250-5/7 2SK3748 Outline Drawing 2SK3748-1E Mass (g) Unit 5.5 mm * For reference No.8250-6/7 2SK3748 Note on usage : Since the 2SK3748 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of May, 2012. Specifications and information herein are subject to change without notice. PS No.8250-7/7