2SB715, 2SB716, 2SB716A Silicon PNP Epitaxial Application • Low frequency high voltage amplifier • Complementary pair with 2SD755, 2SD756 and 2SD756A Outline TO-92MOD 1. Emitter 2. Collector 3. Base 3 2 1 2SB715, 2SB716, 2SB716A Absolute Maximum Ratings (Ta = 25°C) Item Symbol 2SB715 2SB716 2SB716A Unit Collector to base voltage VCBO –100 –120 –140 V Collector to emitter voltage VCEO –100 –120 –140 V Emitter to base voltage VEBO –5 –5 –5 V Collector current IC –50 –50 –50 mA Collector power dissipation PC 750 750 750 mW Junction temperature Tj 150 150 150 °C Storage temperature Tstg –55 to +150 –55 to +150 –55 to +150 °C Electrical Characteristics (Ta = 25°C) 2SB715 Typ 2SB716 2SB716A Max Min Min Item Symbol Min Typ Max Typ Max Unit Test conditions Collector to base breakdown voltage V(BR)CBO –100 — — –120 — — –140 — — V IC = –10 µA, IE = 0 Collector to emitter breakdown voltage V(BR)CEO –100 — — –120 — — –140 — — V IC = –1 mA, RBE = ∞ Collector cutoff current ICBO — — –0.5 — — — — — — µA VCB = –80 V, I E = 0 — — — — — –0.5 — — –0.5 µA VCB = –100 V, IE = 0 250 — 800 250 — 800 250 — 500 VCE = –12 V, IC = –2 mA hFE2 125 — — 125 — — 125 — — VCE = –12 V, IC = –10 mA Base to emitter voltage VBE — — –0.75 — — –0.75 — — –0.75 V VCE = –12 V, IC = –2 mA Collector to emitter saturation voltage VCE(sat) — — –0.2 — — –0.2 — — –0.2 V IC = –10 mA, IB = –1 mA Gain bandwidth product fT — 150 — — 150 — — 150 — MHz VCE = –12 V, IC = –5 mA Collector output capacitance — 1.8 — — 1.8 — — 1.8 — pF DC current transfer ratio hFE1* Note: 1 Cob 1. The 2SB715, 2SB716 and 2SB716A are grouped by h FE1 as follows. D E 2SB715, 2SB716 250 to 500 400 to 800 2SB716A — 2 250 to 500 VCB = –25 V, I E = 0, f = 1 MHz 2SB715, 2SB716, 2SB716A Typical Output Characteristics –10 750 Collector Current IC (mA) Collector Power Dissipation Pc (mW) Maximum Collector Dissipation Curve 500 250 –16 –14 –8 –6 –12 –10 –4 –6 –8 –4 –2 µA –2 IB = 0 0 0 50 100 150 Ambient Temperature Ta (°C) –10 –20 –30 –40 –50 Collector to Emitter Voltage VCE (V) DC Current Transfer Ratio vs. Collector Current Typical Transfer Characteristics –10 –3 DC Current Transfer Ratio hFE Collector Current IC (mA) 1,000 VCE = –12 V Pulse –1.0 –0.3 Ta = 100°C –0.1 –0.03 75 50 25 –0.01 –0.2 0 VCE = –12 V Pulse 800 Ta = 100°C 600 0 –25 400 75 50 25 200 –25 –0.4 –0.6 –0.8 Base to Emitter Voltage VBE (V) 0 –0.01 –0.03 –0.1 –0.3 –1.0 –3 Collector Current IC (mA) –10 –30 3 2SB715, 2SB716, 2SB716A Collector Output Capacitance vs. Collector to Base Voltage Collector Output Capacitance Cob (pF) Gain Bandwidth Product fT (MHz) Gain Bandwidth Product vs. Collector Current 1,000 VCE = –12 V 300 100 30 10 5 –0.01 –0.03 –0.1 –0.3 –1.0 –3 Collector Current IC (mA) –10 –30–50 50 f = 1 MHz IE = 0 20 10 5 2 1.0 0.5 –1 –3 –10 –30 –100 Collector to Base Voltage VCB (V) Area of Safe Operation –100 Ta = 25°C Collector Current IC (mA) IC (max) –50 P D C C –20 O = 75 0 pe ra m W tio n (–50 V, –15 mA) –10 (–100 V, –7.5 mA) –5 (–120 V, –5 mA) (–140 V, –4 mA) –2 2SB715 2SB716A 2SB716 –1 –5 –10 –20 –50 –100 –200 –500 Collector to Emitter Voltage VCE (V) 4 Unit: mm 4.8 ± 0.3 0.65 ± 0.1 0.75 Max 0.7 0.60 Max 0.5 ± 0.1 10.1 Min 2.3 Max 8.0 ± 0.5 3.8 ± 0.3 0.5 1.27 2.54 Hitachi Code JEDEC EIAJ Weight (reference value) TO-92 Mod — Conforms 0.35 g Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Stra§e 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.