MCC 60 ITRMS = 2x 100 A = 2x 64 A ITAVM VRRM, DRM = 1600 V Thyristor Module Preliminary data VRRM VDSM VDRM V V 1700 1600 6 7 1 5 4 2 TO-240 AA ITRMS, IFRMS ITAVM TVJ = TVJM TC = 85°C; 180° sine 7 4 5 Maximum Ratings 100 64 A A TVJ = 45°C; VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1150 1230 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1000 1070 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 6610 6350 A2 s A2 s Features ● ● ● ● ● TVJ = TVJM VR = 0 ● 2 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 5000 4810 As A2 s TVJ = TVJM repetitive, IT = 150 A f = 50Hz, tP = 200µs VD = 2/3 VDRM IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/µs 150 A/µs 1000 V/µs 10 5 W W PGAV 0.5 W VRGM 10 V TVJ TVJM Tstg -40...+140 140 -40...+125 °C °C °C 3000 3600 V~ V~ TVJ = TVJM; VDR = 2/3 VDRM RGK = ¥; method 1 (linear voltage rise) PGM TVJ = TVJM IT = ITAVM tP = tP = 30 µs 300 µs VISOL 50/60 Hz, RMS IISOL £ 1 mA t = 1 min t=1s Md Mounting torque (M5) Terminal connection torque (M5) Weight Typical including screws ● ● Space and weight savings Simple mounting with two screws Improved temperature and power cycling Reduced protection circuits Dimensions in mm (1 mm = 0.0394") 2.5-4.0/22-35 Nm/lb.in. 2.5-4.0/22-35 Nm/lb.in. Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions © 2000 IXYS All rights reserved DC motor control Softstart AC motor controller Light, heat and temperature control Advantages ● A/µs (dv/dt)cr ● ● 500 International standard package Direct copper bonded Al2O3-ceramic base plate Planar passivated chips Isolation voltage 3600 V~ Gate-cathode twin pins Applications ● (di/dt)cr 6 MCC 60-16io1 B Conditions I2dt 3 2 1 Symbol ITSM, IFSM 3 Type 90 g 928 VRSM 1-2 MCC 60 Symbol Conditions Characteristic Values IRRM, IDRM TVJ = TVJM; VR = VRRM; VD = VDRM VT, VF 20 mA IT, IF = 200 A; TVJ = 25°C 1.70 V VT0 rT TVJ = 125°C; For power-loss calculations only TVJ = TVJM 0.85 4.8 V mW VGT VD = 6 V; 25°C -40°C 25°C -40°C 1.4 1.6 100 200 V V mA mA VD = 2/3 VDRM 0.2 10 V mA mA IGT VD = 6 V; TVJ TVJ TVJ TVJ = = = = VGD IGD TVJ = TVJM; IL TVJ = 25°C; tP = 10 µs, VD = 6 V IG = 0.45 A; diG/dt = 0.45 A/µs 450 IH TVJ = 25°C; VD = 6 V; RGK = ¥ 200 mA tgd TVJ = 25°C; VD = ½ VDRM IG = 0.45 A; diG/dt = 0.45 A/µs 2 µs tq TVJ = TVJM; IT = 120 A, tP = 200 µs; -di/dt = 10 A/µstyp. VR = 100 V; dv/dt = 20 V/µs; VD = 2/3 VDRM 150 µs QS IRM TVJ = TVJM; IT, IF = 50 A, -di/dt = 0.64 A/µs 110 12 µC A RthJC RthCH per thyristor/diode; DC current per module per thyristor/diode; DC current dS dA a Creepage distance on surface Strike distance through air Maximum allowable acceleration 10 1: IGT, TVJ = 125°C V 2: IGT, TVJ = 25°C 3: IGT, TVJ = -40°C VG 3 2 1 6 4 4: PGAV = 0.5 W 5: PGM = IGD, TVJ = 125°C typ. 5 1 0.1 100 101 5W 6: PGM = 10 W 102 103 IG mA 104 Fig. 1 Gate trigger characteristics 1000 TVJ = 25°C 0.5 0.25 0.1 K/W K/W K/W 12.7 9.6 50 mm mm m/s2 µs tgd typ. 100 Limit 10 Optional accessories for module-type MCC 60 version 1 B Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 200R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1 1 10 mA 100 1000 IG Fig. 2 Gate trigger delay time © 2000 IXYS All rights reserved 2-2