Advanced Technical Information MUBW 35-12 E7 Converter - Brake - Inverter Module (CBI2) NPT3-IGBT 21 D11 D13 22 D15 D7 D1 T1 16 7 1 D12 2 D14 3 D16 T7 11 D3 T3 17 15 14 18 D2 T5 8 5 12 NTC 19 6 T2 D5 20 D4 T4 4 D6 13 T6 9 10 Three Phase Rectifier V RRM = 1600 V I FAVM = 42 A I FSM = 300 A 24 Brake Chopper Three Phase Inverter VCES = 1200 V VCES = 1200 V IC25 = 35 A IC25 = 52 A VCE(sat) = 2.3 V VCE(sat) = 2.2 V Application: AC motor drives with Input Rectifier Bridge D11 - D16 Symbol Conditions Maximum Ratings VRRM 1600 V IFAV IDAVM IFSM TC = 80°C; sine 180° TC = 80°C; rectangular; d = 1/3; bridge TVJ = 25°C; t = 10 ms; sine 50 Hz 30 80 300 A A A Ptot TC = 25°C 100 W Symbol Conditions VF IF = 35 A; TVJ = 25°C TVJ = 125°C 1.2 1.2 IR VR = VRRM; TVJ = 25°C TVJ = 125°C 0.4 RthJC Characteristic Values (TVJ = 25°C, unless otherwise specified) min. typ. max. (per diode) IXYS reserves the right to change limits, test conditions and dimensions. © 2002 IXYS All rights reserved 1.4 V V 0.02 mA mA • • • • Input from single or three phase grid Three phase synchronous or asynchronous motor electric braking operation Features • High level of integration - only one power semiconductor module required for the whole drive • Inverter with NPT3 IGBTs - low saturation voltage - positive temperature coefficient - fast switching - short tail current • Epitaxial free wheeling diodes with Hiperfast and soft reverse recovery • Industry standard package with insulated copper base plate and soldering pins for PCB mounting • Temperature sense included 1.3 K/W 228 23 1-4 Advanced Technical Information Output Inverter T1 - T6 MUBW 35-12 E7 Equivalent Circuits for Simulation Symbol Conditions VCES TVJ = 25°C to 150°C 1200 V VGES Continuous ± 20 V IC25 IC80 TC = 25°C TC = 80°C 52 36 A A ICM VCEK RBSOA; VGE = ±15 V; RG = 39 Ω; TVJ = 125°C Clamped inductive load; L = 100 µH 50 VCES A tSC (SCSOA) VCE = 900 V; VGE = ±15 V; RG = 39 Ω; TVJ = 125°C non-repetitive 10 µs T1 - T6 / D1 - D6 Ptot TC = 25°C 225 W IGBT (typ. at VGE = 15 V; TJ = 125°C) V0 = 0.95 V; R0 = 45 mΩ Symbol Conditions Maximum Ratings Characteristic Values (TVJ = 25°C, unless otherwise specified) min. typ. max. VCE(sat) IC = 35 A; VGE = 15 V; TVJ = 25°C TVJ = 125°C VGE(th) IC = 1 mA; VGE = VCE ICES VCE = VCES; VGE = 0 V; TVJ = 25°C TVJ = 125°C IGES td(on) tr td(off) tf Eon Eoff 2.2 2.5 4.5 2.8 V V 6.5 V 0.4 mA mA 200 nA 0.4 VCE = 0 V; VGE = ± 20 V Inductive load, TVJ = 125°C VCE = 600 V; IC = 35 A VGE = ±15 V; RG = 39 Ω 150 60 700 50 4.2 3.5 ns ns ns ns mJ mJ Cies QGon VCE = 25 V; VGE = 0 V; f = 1 MHz VCE = 600V; VGE = 15 V; IC = 35 A 2 250 nF nC RthJC (per IGBT) 0.55 K/W Conduction D11 - D16 Rectifier Diode (typ. at TJ = 125°C) V0 = 0.83 V; R0 = 11 mΩ Free Wheeling Diode (typ. at TJ = 125°C) V0 = 1.26V; R0 = 15 mΩ T7 / D7 IGBT (typ. at VGE = 15 V; TJ = 125°C) V0 = 1.37 V; R0 = 62 mΩ Free Wheeling Diode (typ. at TJ = 125°C) V0 = 1.39 V; R0 = 56 mΩ Thermal Response D11 - D16 Rectifier Diode (typ.) Cth1 = 0.106 J/K; Rth1 = 1.06 K/W Cth2 = 0.79 J/K; Rth2 = 0.239 K/W T1 - T6 / D1 - D6 Output Inverter D1 - D6 Symbol Conditions IF25 IF80 TC = 25°C TC = 80°C Symbol Conditions VF Maximum Ratings 50 33 A A Characteristic Values min. typ. max. IF = 35 A; VGE = 0 V; TVJ = 25°C TVJ = 125°C 1.8 V V IRM trr IF = 30 A; diF/dt = -500 A/µs; TVJ = 125°C VR = 600 V; VGE = 0 V 27 150 A ns RthJC (per diode) © 2002 IXYS All rights reserved 2.8 IGBT (typ.) Cth1 = 0.201 J/K; Rth1 = 0.419 K/W Cth2 = 1.25 J/K; Rth2 = 0.131 K/W Free Wheeling Diode (typ.) Cth1 = 0.116 J/K; Rth1 = 0.973 K/W Cth2 = 0.879 J/K; Rth2 = 0.217 K/W T7 / D7 IGBT (typ.) Cth1 = 0.156 J/K; Rth1 = 0.545 K/W Cth2 = 1.162 J/K; Rth2 = 0.155 K/W Free Wheeling Diode (typ.) Cth1 = 0.043 J/K; Rth1 = 2.738 K/W Cth2 = 0.54 J/K; Rth2 = 0.462 K/W 1.19 K/W 2-4 Advanced Technical Information MUBW 35-12 E7 Brake Chopper T7 Symbol Conditions VCES TVJ = 25°C to 150°C 1200 V VGES Continuous ± 20 V VGEM Transient ± 30 V IC25 IC80 TC = 25°C TC = 80°C 35 25 A A ICM VCEK RBSOA; VGE = ±15 V; RG = 82 Ω; TVJ = 125°C Clamped inductive load; L = 100 µH 35 VCES A tSC (SCSOA) VCE = VCES; VGE = ±15 V; RG = 82 Ω; TVJ = 125°C non-repetitive 10 µs Ptot TC = 25°C 180 W Symbol Conditions VCE(sat) IC = 20 A; VGE = 15 V; TVJ = 25°C TVJ = 125°C VGE(th) IC = 0.6 mA; VGE = VCE ICES VCE = VCES; VGE = 0 V; TVJ = 25°C TVJ = 125°C IGES td(on) tr td(off) tf Eon Eoff Cies QGon Maximum Ratings Characteristic Values (TVJ = 25°C, unless otherwise specified) min. typ. max. 2.3 2.6 4.5 3 V V 6.5 V 0.8 mA mA 200 nA 0.8 VCE = 0 V; VGE = ± 20 V Inductive load, TVJ = 125°C VCE = 600 V; IC = 20 A VGE = ±15 V; RG = 82 Ω 100 75 500 70 3.1 2.4 ns ns ns ns mJ mJ VCE = 25 V; VGE = 0 V; f = 1 MH z VCE = 600V; VGE = 15 V; IC = 20 A 1000 70 pF nC RthJC 0.7 K/W Brake Chopper D7 Symbol Conditions VRRM TVJ = 25°C to 150°C IF25 IF80 TC = 25°C TC = 80°C Symbol Conditions VF IF = 20 A; TVJ = 25°C TVJ = 125°C 2.6 VR = VRRM; TVJ = 25°C TVJ = 125°C IF = 20 A; diF/dt = -400 A/µs; TVJ = 125°C VR = 600 V IR IRM trr RthJC © 2002 IXYS All rights reserved Maximum Ratings 1200 V 16 11 A A Characteristic Values min. typ. max. 3.6 V V 0.06 0.07 mA mA 13 110 A ns 3.2 K/W 3-4 Advanced Technical Information MUBW 35-12 E7 Temperature Sensor NTC Symbol Conditions Characteristic Values min. typ. max. R25 B25/50 T = 25°C 4.75 5.0 3375 5.25 kΩ K Module Symbol Conditions Maximum Ratings TVJ TJM Tstg -40...+150 150 -40...+125 °C °C °C VISOL IISOL ≤ 1 mA; 50/60 Hz 2500 V~ Md Mounting torque (M5) 2.7 - 3.3 Nm Symbol Conditions Characteristic Values min. typ. max. Rpin-chip 5 dS dA Creepage distance on surface Strike distance in air RthCH with heatsink compound Weight 6 6 mΩ mm mm 0.02 K/W 180 g 023 Dimensions in mm (1 mm = 0.0394") © 2002 IXYS All rights reserved 4-4