Converter - Brake - Inverter Module PSIPM 35/12 Preliminary Data Sheet C1 V15 U15 H15 A15 A10 A5 N15 L15 J15 D15 Q15 O15 L1 F15 F1 H1 S15 V11 V13 P1 R1 N1 U1 V1 t e e h r s e a t d a n d u l e l t i v t i n t s e a t t m c n p te odu elo pr dev V4 V7 Three Phase Rectifier Brake Chopper Three Phase Inverter V RRM I FAVM I FSM VCES = 1200 V IC25 = 30 A VCE(sat) = 2.6 V VCES = 1200 V IC25 = 49 A VCE(sat) = 3.1 V = 1600 V = 68 A = 300 A ECO-TOPTM 1 Input Rectifiers Symbol Test Conditions I* TC = 100 °C, I dAV FSM V (per circuit) 68 TVJ = 25°C; t = 10 ms; sin 50 Hz RRM Symbol IR Test Conditions VR = VRRM, TVJ = TVJM Features Maximum Ratings A 300 A 1600 V Characteristic Value ≤ 3 mA VR = VRRM, TVJ = 25°C ≤ 0.5 mA V IF = 55 A, TVJ = 25 °C ≤ 1.46 V V For power-loss calculations only F r TO T RthJC per diode; DC 0.8 V 13 mΩ 1.1 K/W • • • • • • • • Package with DCB ceramic base plate High level of integration - only one power semiconductor module required for the whole drive Planar glass passivated chips NPT IGBT technology with low saturation voltage, low switching losses, high RBSOA and short circuit ruggedness Epitaxial free wheeling diodes with hiperfast and soft reverse recovery Temperature sense included Leads suitable for PC board soldering UL Release applied Application: AC motor drives with Caution: These Devices are sensitive to electrostatic discharge. Users should observe proper ESD handling precautions. • • • Input from single or three phase grid Three phase synchronous or asynchronous motor Electric braking operations 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 PSIPM 35/12 Output Inverter IGBTs Symbol Conditions VCES TVJ = 25°C to 150°C VGES IC25 IC80 ICM VCEK tSC (SCSOA) Ptot Symbol VCE(sat) VGE(th) ICES IGES td(on) tr td(off) tf Eon Eoff Maximum Ratings 1200 V t e e h r s e a t d a n d u l e l t i v t i n t s e a t t m c n p te odu elo pr dev ± 20 V TC = 25°C TC = 80°C 49 33 A A VGE = ±15 V; RG = 47 Ω; TVJ = 125°C RBSOA, Clamped inductive load; L = 100 µH 50 A VCES VCE = VCES; VGE = ±15 V; RG = 47 Ω; TVJ = 125°C non-repetitive TC = 25°C Conditions µs 208 W Characteristic Values (TVJ = 25°C, unless otherwise specified) min. typ. max. IC = 50 A; VGE = 15 V; TVJ = 25°C TVJ = 125°C IC = 1 mA; VGE = VCE VCE = VCES; 10 VGE = 0 V; 3.1 3.5 4.5 TVJ = 25°C TVJ = 125°C VCE = 0 V; VGE = ± 20 V Inductive load, TVJ = 125°C VCE = 600 V; IC = 30 A VGE = 15/0 V; RG = 47 Ω Cies VCE = 25 V; VGE = 0 V; f = 1 MHz RthJC (per IGBT) 3.7 V V 6.5 V 1.1 4.2 mA mA 180 nA 100 70 500 70 4.6 3.4 ns ns ns ns mJ mJ 1.65 nF 0.6 K/W Output Inverter Reverse Diodes (FRED) Symbol Conditions IF25 IF80 TC = 25°C TC = 80°C 49 31 Symbol Conditions Characteristic Values min. typ. max. VF IF = 30 A; IRM t rr IF = 30 A; diF/dt = 500 A/µs; TVJ = 125°C VR = 600 V; VGE = 0 V RthJC Maximum Ratings TVJ = 25°C TVJ = 125°C 2.4 1.77 27 150 A A 2.7 V V A ns 1.3 K/W 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 PSIPM 35/12 Brake Chopper IGBT Symbol Conditions Maximum Ratings VCES TVJ = 25°C to 150°C 1200 V ± 20 V 30 21 A A VGE = ±15 V; RG = 82 Ω; TVJ = 125°C RBSOA, Clamped inductive load; L = 100 µH 35 VCES A tSC (SCSOA) VCE = VCES; VGE = ±15 V; RG = 82 Ω; TVJ = 125°C non-repetitive 10 µs P tot TC = 25°C 130 W VGES IC25 IC80 I CM VCEK TC = 25°C TC = 80°C t e e h s r e a t d a n d u l e l t i v t i n t s e a t t m c n te odu elop r p dev Symbol Conditions Characteristic Values (TVJ = 25°C, unless otherwise specified) min. VCE(sat) VGE(th) ICES IGES td(on) tr t d(off) tf Eon Eoff Cies RthJC IC = 25 A; VGE = 15 V; TVJ = 25°C TVJ = 125°C IC = 0.6 mA; VGE = VCE VCE = VCES; VGE = 0 V; typ. max. 2.6 2.9 4.5 TVJ = 25°C TVJ = 125°C VCE = 0 V; VGE = ± 20 V 3.3 V V 6.5 V 0.9 3.7 mA mA 100 nA Inductive load, TVJ = 125°C VCE = 600 V; IC = 17.5 A VGE = 15/0 V; RG = 82 Ω 100 75 500 70 2.7 2.1 ns ns ns ns mJ mJ VCE = 25 V; VGE = 0 V; f = 1 MHz 1 nF (per IGBT) 0.96 K/W Brake Chopper Diode (FRED) Symbol Conditions IF25 IF80 TC = 25°C TC = 80°C Symbol Conditions VF IF = 17.5 A; TVJ = 25°C TVJ = 125°C 2.48 1.84 I RM trr IF = 15 A; diF/dt = 400 A/µs; TVJ = 125°C VR = 600 V; VGE = 0 V 16 130 RthJC Maximum Ratings 26 17 A A Characteristic Values min. typ. max. 2.79 V V A ns 2.3 K/W 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 PSIPM 35/12 Temperature Sensor NTC Symbol R25 B25/50 Conditions Characteristic Values min. typ. max. T = 25°C 4.75 t e e h s r e a t d a n d u l e l t i v t i n t s e a t t m c n p te odu elo pr dev 5.0 3375 5.25 kΩ K Module Symbol TVJ Tstg VISOL Md a Symbol dS dA Weight Conditions Maximum Ratings -40...+125 -40...+125 °C °C IISOL ≤ 1 mA; 50/60 Hz 2500 V~ Mounting torque (M5) 3 26 50 Nm lb.in. m/s 2 Max. allowable acceleration Conditions Characteristic Values min. typ. max. Creepage distance on surface (Pin to heatsink) Strike distance in air (Pin to heatsink) 11.2 11.2 mm mm 86 g Package style and outline Dimensions in mm (1mm = 0.0394“) 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20