PC813 Series PC813 Series AC Input Type & High Noise Reduction Type Photocoupler ■ Features ■ Applications 1. High instantaneous common mode rejection voltage ( CM H : TYP.2kV/ µ s ) 1. Telephones ( PC813 ) 2. Programmable controllers ( PC823/PC843) 2. AC input response 3. Compact dual-in-line package PC813 ( 1ch ) , PC823 ( 2ch ) , PC843 (4ch) 3. System appliances, measuring instruments 4. Signal transmission between circuits of different potentials and impedances 4. High isolation voltage between input and output ( Viso : 5 000V rms ) 5. Recognized by UL, file No. E64380 ■ Outline Dimensions PC813 ( Unit : mm ) Internal connection diagram 4 3 2.54 ± 0.25 3 CTR rank mark Anode mark 0.9 ± 0.2 1 6.5 ± 0.5 PC813 4 2 1 4.58 ± 0.5 2 Anode, Cathode 2 Anode, Cathode 3 Emitter 4 Collector 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 7.62 ± 0.3 1 5 3 7 Anode, Cathode 2 4 6 8 Anode, Cathode 9 11 13 15 Emitter 10 12 14 16 Collector 3.0 ± 0.5 2.7 ± 0.5 3.5 ± 0.5 Internal connection diagram 1 1.2 ± 0.3 θ = 0 to 13 ˚ θ 0.5 ± 0.1 θ 0.26 ± 0.1 2.54 ± 0.25 16 PC823 14 13 12 11 10 9 8 6 PC823 1 2 3 7 8 PC843 5 2 3 4 2 3 4 CTR rank mark 4 0.9 ± 0.2 1.2 ± 0.3 9.66 ± 0.5 3.0 ± 0.5 0.5TYP. 0.26 ± 0.1 0.5 ± 0.1 1 3 Anode,Cathode 2 4 Anode,Cathode θ θ = 0 to 13 ˚ 5 6 0.9 ± 0.2 1.2 ± 0.3 19.82 ± 0.5 7.62 ± 0.3 2.7 ± 0.5 3.5 ± 0.5 6 1 1 rank mark 7 5 θ 3.0 ± 0.5 3.5 ± 0.5 7 6.5 ± 0.5 8 6.5 ± 0.5 2.54 ± 0.25 0.5TYP. 15 Internal connection diagram 7.62 ± 0.3 2.7 ± 0.5 0.5TYP. PC843 0.5 ± 0.1 θ 5 7 Emitter 6 8 Collector “ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device. ” θ = 0 to 13 ˚ 0.26 ± 0.1 θ PC813 Series ■ Absolute Maximum Ratings Input Output Parameter Forward current *1 Peak forward current Power dissipation Collector-emitter voltage Emitter-collector voltage Collector current Collector power dissipation Total power dissipation *2 Isolation voltage Operating temperature Storage temperature *3 Soldering temperature ( Ta = 25˚C ) Symbol IF I FM P V CEO V ECO IC PC P tot V iso T opr T stg T sol Rating ± 50 ±1 70 35 6 50 150 200 5 000 - 30 to + 100 - 55 to + 125 260 Unit mA A mW V V mA mW mW V rms ˚C ˚C ˚C *1 Pulse width<=100 µs, Duty ratio : 0.001 *2 40 to 60% RH, AC for 1 minute *3 For 10 seconds ■ Electro-optical Characteristics Input Output Transfer characteristics Parameter Forward voltage Peak forward voltage Terminal capacitance Collector dark current *4 Current transfer ratio Collector-emitter saturation voltage Isolation voltage Floating capacitance Cut-off frequency Rise time Response time Fall time *5 Instantaneous common mode rejection voltage “ Output : high level ” *5 Instantaneous common mode rejection voltage “ Output : low level ” ( Ta = 25˚C ) Symbol VF V FM Ct I CEO CTR V CE(sat) R ISO Cf fc tr tf CM H CM L *4 Classification table of current transfer ratio is shown below Model No. PC813A PC823A PC843A PC813 PC823 PC843 Rank Mark CTR ( % ) A 50 to 150% A or no mark 20 to 200% Conditions I F = ± 20mA I FM = ± 0.5A V = 0, f = 1kHz V CE = 20V, I F = 0 I F = ± 1mA, V CE = 5V I F = ± 20mA, I C = 1mA DC500V, 40 to 60% RH V = 0, f = 1MHz MIN. 20 5 x 1010 V CE = 5V, I C = 2mA, R L = 100 Ω,-3dB 15 V CE = 2V, I C = 2mA R L = 100 Ω V CM = 600V, I F = 0 V O = 2V, R L = 1.9k Ω ,Vcc=5V V CM = 600V, I F = 16mA V O = 0.8V, R L = 1.9k Ω,Vcc=5V TYP. 1.2 50 0.1 1011 0.6 80 4 5 MAX. 1.4 3.0 250 10 - 7 200 0.2 1.0 18 20 Unit V V pF A % V Ω pF kHz µs µs 2 - kV/ µ s 2 - kV/ µ s PC813 Series *5 Test Circuit for instantaneous common mode rejection voltage 600V VCC(5V) RL VO IF VCM CMH(IF = 0) 0V 5V VO - + VO(MIN.) = 2.0V GND VCM CML(IF = 16mA) VO VO(MAX.) = 0.8V GND Fig. 1 Forward Current vs. Ambient Temperature Fig. 2 Collector Power Dissipation vs. Ambient Temperature 60 Collector power dissipation P C ( mW ) 200 Forward current I F ( mA ) 50 40 30 20 10 0 - 30 0 25 50 75 100 150 100 50 0 - 30 125 0 Fig. 3 Peak Forward Current vs. Duty Ratio 10 000 500 Forward current I F ( mA ) 2 000 1 000 FM ( mA ) 75 100 125 T a = 75˚C 200 Peak forward current I 50 Fig. 4 Forward Current vs. Forward Voltage Pulse width <=100µs T a = 25˚C 5 000 25 Ambient temperature T a ( ˚C ) Ambient temperature T a ( ˚C) 500 200 100 50 50˚C 100 25˚C 0˚C 50 - 25˚C 20 10 5 2 20 10 1 5 5 10 -3 2 5 10 -2 2 5 Duty ratio 10 -1 2 5 1 0 0.5 1.0 1.5 2.0 2.5 Forward voltage V F ( V ) 3.0 3.5 PC813 Series Fig. 5 Current Transfer Ratio vs. Forward Current Fig. 6 Collector Current vs. Collector-emitter Voltage 25 200 VCE = 5V T a = 25˚C Current transfer ratio CTR ( % ) 180 Collector current I C ( mA ) 140 120 100 80 60 1 10 Forward current I F ( mA ) 50 100 20 40 60 80 Ambient temperature T a ( ˚C ) 100 10 -6 10 -7 10 -8 9 10 (V) I F = 20mA 0.14 I C = 1mA 0.12 0.10 0.08 0.06 0.04 0.02 0 - 30 0 20 40 60 80 Ambient temperature T a ( ˚C ) 100 500 V CE = 2V 200 I C = 2mA 100 T a = 25˚C V CE = 20V Response time ( µ s ) 5 5 5 -9 50 20 10 5 2 1 5 tf td tr ts 0.5 - 10 5 - 11 - 30 8 CE Fig.10 Response Time vs. Load Resistance -5 5 6 7 2 3 4 5 Collector-emitter voltage V 0.16 I F = 10mA VCE = 5V 0 1 Fig. 8 Collector-emitter Saturation Voltage vs. Ambient Temperature Collector-emitter saturation voltage V CE(sat) ( V ) Relative current transfer ratio ( % ) 5mA 1mA Fig. 9 Collector Dark Current vs. Ambient Temperature Collector dark current I CEO ( A ) 10 0 0 50 10 10mA 20 0 0.1 100 10 15 5 150 10 P C ( MAX. ) 40 Fig. 7 Relative Current Transfer Ratio vs. Ambient Temperature 10 T a = 25˚C 20mA 20 160 0 - 30 I F = 30 mA 20 0 40 60 80 Ambient temperature T a ( ˚C ) 100 0.2 0.1 0.01 0.1 1 10 Load resistance RL ( k Ω ) 50 PC813 Series Fig.11 Frequency Response Test Circuit for Response Time V CE = 5V I C = 2mA T a = 25˚C Voltage gain A v ( dB ) 0 Input V CC -5 Output 100 Ω Input RD RL Output 10% - 10 90% RL = 10k Ω - 15 1k Ω td ts tr - 20 0.5 1 2 10 5 20 50 100 200 500 Frequency f ( kHz ) Fig.12 Collector-emitter Saturation Voltage vs. Forward Current Test Circuit for Frepuency Response Collector-emitter saturation voltage V CE ( sat ) ( V ) 8 T a = 25˚C I C = 0.5mA 7 1mA V CC 6 3mA 5 RD 4 7mA 3 2 1 0 0 1 2 3 4 5 RL Output 5mA 6 7 8 9 10 Forward current I F ( mA ) ● Please refer to the chapter “ Precautions for Use ” tf Application Circuits NOTICE ●The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. ●Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. ●Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: --- Personal computers --- Office automation equipment --- Telecommunication equipment [terminal] --- Test and measurement equipment --- Industrial control --- Audio visual equipment --- Consumer electronics (ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: --- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- Traffic signals --- Gas leakage sensor breakers --- Alarm equipment --- Various safety devices, etc. (iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- Space applications --- Telecommunication equipment [trunk lines] --- Nuclear power control equipment --- Medical and other life support equipment (e.g., scuba). ●Contact a SHARP representative in advance when intending to use SHARP devices for any "specific" applications other than those recommended by SHARP or when it is unclear which category mentioned above controls the intended use. ●If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export such SHARP devices. ●This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. ●Contact and consult with a SHARP representative if there are any questions about the contents of this publication. 115