SUBMINIATURE SOLID STATE LAMPS Features ! LONG ! LOW AM2520SRC09 SUPER BRIGHT RED PACKAGE. The Super Bright Red source color devices are made VIEWING ANGLE. ! Z-BEND SUPER BRIGHT RED Description ! SUBMINIATURE ! WIDE AM2520SRD09 with Gallium Aluminum Arsenide Red Light Emitting LEAD. LIFE - SOLID STATE RELIABILITY. Diode. PACKAGE PROFILE. ! PACKAGE : 1000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: CDA0473 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: OCT/28/2001 DRAWN:M.F.CAI PAGE: 1 OF 4 Selection Guide Par t No . Dic e Iv (mc d ) @ 20 mA L en s Ty p e Viewin g An g le Mi n . Ty p . 2θ1/2 AM2520SRD09 SUPER BRIGHT RED (GaAlAs) RED DIFFUSED 50 150 40° AM2520SRC09 SUPER BRIGHT RED (GaAlAs) WATER CLEAR 120 600 20° Un its Tes t Co n d it io n s Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°°C Sy m b o l P ar am et er λpeak λD ∆λ1/2 D ev i c e Ty p . Peak Wavelength Super Bright Red 660 nm IF=20mA Dominate Wavelength Super Bright Red 640 nm IF=20mA Spectral Line Halfwidth Super Bright Red 20 nm IF=20mA pF VF=0V;f=1MHz 2.5 V IF=20mA 10 uA V R = 5V C Capacitance Super Bright Red 45 VF Forward Voltage Super Bright Red 1.85 IR Reverse Current Super Bright Red Max . Absolute Maximum Ratings at TA=25°°C P ar am et er S u p er B r i g h t R ed Un its Power dissipation 100 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: CDA0473 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: OCT/28/2001 DRAWN:M.F.CAI PAGE: 2 OF 4 Super Bright Red AM2520SRD09, AM2520SRC09 SPEC NO: CDA0473 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: OCT/28/2001 DRAWN:M.F.CAI PAGE: 3 OF 4 AM2520SRD09, AM2520SRC09 SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: CDA0473 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: OCT/28/2001 DRAWN:M.F.CAI PAGE: 4 OF 4