TI UM6K31N

2.5V Drive Nch + Nch MOSFET
UM6K31N
Dimensions (Unit : mm)
Structure
Silicon N-channel MOSFET
UMT6
(SC-88)
<SOT-363>
Features
1) High speed switing.
2) Small package(UMT6).
3) Low voltage drive(2.5V drive).
(6)
(1)
(5)
(2)
(4)
(3)
Application
Switching
Abbreviated symbol : K31


Packaging specifications
Package
Type
Code
Basic ordering unit (pieces)
UM6K31N
Inner circuit
Taping
TN
3000

(6)
∗2
∗2

∗1
(1)
(2)
(3)
∗1 ESD PROTECTION DIODE
∗2 BODY DIODE
Absolute maximum ratings (Ta = 25C)
Symbol
Parameter
Drain-source voltage
Gate-source voltage
Source current
(Body Diode)
(4)
∗1








Drain current
(5)
Continuous
Pulsed
Continuous
Pulsed
Power dissipation
Channel temperature
Range of storage temperature
VDSS
VGSS
ID
IDP
Is
Isp
PD
*1
*1
*2
Tch
Tstg
Limits
Unit
60
20
V
V
250
1
125
1
mA
A
mA
A
(1) Tr1 SOURCE
(2) Tr1 GATE
(3) Tr2 DRAIN
(4) Tr2 SOURCE
(5) Tr2 GATE
(6) Tr1 DRAIN
150
mW / TOTAL
120
mW / ELEMENT
150
C
55 to +150
C
*1 Pw10s, Duty cycle1%
*2 Each terminal mounted on a recommended land.



Thermal resistance
Parameter
Channel to ambient
Symbol
*
Rth (ch-a)
Limits
Unit
833
1042
°C / W /TOTAL
°C / W /ELEMENT
* Each terminal mounted on a recommended land.
www.rohm.com
c 2010 ROHM Co., Ltd. All rights reserved.
○

1/5
2010.04 - Rev.A
UM6K31N
Data Sheet
Electrical characteristics (Ta = 25C)
<It is the same ratings for Tr1 and Tr2.>
Parameter
Gate-source leakage
Symbol
Gate threshold voltage
Static drain-source on-state
resistance
Forward transfer admittance
Typ.
Max.
Unit
Conditions
-
-
10
A
VGS=20V, VDS=0V
60
-
-
V
ID=1mA, VGS=0V
IDSS
-
-
1
A
VDS=60V, VGS=0V
VGS (th)
1.0
-
2.3
V
VDS=10V, ID=1mA
-
1.7
2.4
-
2.1
3.0
IGSS
Drain-source breakdown voltage V(BR)DSS
Zero gate voltage drain current
Min.
RDS (on)*
ID=250mA, VGS=10V

ID=250mA, VGS=4.5V
-
2.3
3.2
-
3.0
12.0
ID=250mA, VGS=4.0V
l Yfs l*
0.25
-
-
S
ID=250mA, VDS=10V
ID=10mA, VGS=2.5V
Input capacitance
Ciss
-
15
-
pF
VDS=25V
Output capacitance
Coss
-
4.5
-
pF
VGS=0V
Reverse transfer capacitance
Crss
-
2.0
-
pF
f=1MHz
Turn-on delay time
td(on) *
-
3.5
-
ns
ID=100mA, VDD 30V
tr *
-
5
-
ns
VGS=10V
td(off) *
-
18
-
ns
RL 300
tf *
-
28
-
ns
RG=10
Rise time
Turn-off delay time
Fall time
*Pulsed
Body diode characteristics (Source-Drain) (Ta = 25C)
<It is the same ratings for Tr1 and Tr2.>
Parameter
Forward voltage
Symbol
VSD *
Min.
Typ.
Max.
-
-
1.2
Unit
V
Conditions
Is=250mA, VGS=0V
*Pulsed
www.rohm.com
c 2010 ROHM Co., Ltd. All rights reserved.
○
2/5
2010.04 - Rev.A
UM6K31N
Data Sheet
Electrical characteristic curves
0.5
0.4
VGS= 10V
VGS= 4.5V
VGS= 4.0V
0.3
0.2
VGS= 2.8V
0.4
0.3
VGS= 2.8V
0.2
0.1
0.1
1
Ta= 25C
Pulsed
VGS= 10V
VGS= 4.5V
VGS= 4.0V
DRAIN CURRENT : ID[A]
Ta= 25C
Pulsed
DRAIN CURRENT : ID[A]
DRAIN CURRENT : ID[A]
0.5
VDS= 10V
Pulsed
0.1
Ta=125C
Ta=75C
Ta=25C
Ta= -25C
0.01
0.001
VGS= 2.5V
VGS= 2.5V
0.0001
0
0
0.4
0.6
0.8
0
1
DRAIN-SOURCE VOLTAGE : VDS[V]
VGS= 2.5V
VGS= 4.0V
VGS= 4.5V
VGS= 10V
10
1
0.1
0.001
0.01
0.1
1
100
VGS= 10V
Pulsed
0.1
0.001
0.01
STATIC DRAIN-SOURCE ON-STATE
RESISTANCE : RDS(on)[]
STATIC DRAIN-SOURCE ON-STATE
RESISTANCE : RDS(on)[]
Ta=125C
Ta=75C
Ta=25C
Ta= -25C
0.1
0.1
100
VGS= 4.5V
Pulsed
10
1
DRAIN-CURRENT : ID[A]
Fig.7 Static Drain-Source On-State
Resistance vs. Drain Current(Ⅳ)
www.rohm.com
c 2010 ROHM Co., Ltd. All rights reserved.
○
0.01
0.1
1
DRAIN-CURRENT : ID[A]
Fig.8 Static Drain-Source On-State
Resistance vs. Drain Current(Ⅳ)
3/5
Ta=125C
Ta=75C
Ta=25C
Ta= -25C
0.01
0.1
1
DRAIN-CURRENT : ID[A]
1
0.1
0.001
GS[V]
1
0.1
0.001
1
Ta=125C
Ta=75C
Ta=25C
Ta= -25C
10
3
Fig.3 Typical Transfer Characteristics
Fig.6 Static Drain-Source On-State
Resistance vs. Drain Current(Ⅲ)
1
VGS= 2.5V
Pulsed
2
GATE-SOURCE VOLTAGE : V
Fig.5 Static Drain-Source On-State
Resistance vs. Drain Current(Ⅱ)
1
0.1
0.001
0.01
1
DRAIN-CURRENT : ID[A]
100
10
0
10
1
Fig.4 Static Drain-Source On-State
Resistance vs. Drain Current(Ⅰ)
VGS= 4.0V
Pulsed
8
Ta=125C
Ta=75C
Ta=25C
Ta= -25C
10
DRAIN-CURRENT : ID[A]
100
6
Fig.2 Typical Output Characteristics(Ⅱ)
STATIC DRAIN-SOURCE ON-STATE
RESISTANCE : RDS(on)[]
STATIC DRAIN-SOURCE ON-STATE
RESISTANCE : RDS(on)[]
Ta= 25C
Pulsed
4
DRAIN-SOURCE VOLTAGE : VDS[V]
Fig.1 Typical Output Characteristics(Ⅰ)
100
2
STATIC DRAIN-SOURCE ON-STATE
RESISTANCE : RDS(on)[]
0.2
FORWARD TRANSFER
ADMITTANCE : |Yfs| [S]
0
VDS= 10V
Pulsed
0.1
Ta= -25C
Ta=25C
Ta=75C
Ta=125C
0.01
0.001
0.01
0.1
1
DRAIN-CURRENT : ID[A]
Fig.9 Forward Transfer Admittance
vs. Drain Current
2010.04 - Rev.A
VGS=0V
Pulsed
0.1
Ta=125C
Ta=75C
Ta=25C
Ta=-25C
0.01
0.001
0
0.5
1
1.5
SOURCE-DRAIN VOLTAGE : VSD [V]
Fig.10 Reverse Drain Current
vs. Sourse-Drain Voltage
CAPACITANCE : C [pF]
100
Ta=25C
f=1MHz
VGS=0V
8
1000
Ta=25C
Pulsed
SWITCHING TIME : t [ns]
1
Data Sheet
STATIC DRAIN-SOURCE ON-STATE
RESISTANCE : RDS(ON)[]
REVERSE DRAIN CURRENT : Is [A]
UM6K31N
6
ID= 0.01A
4
ID= 0.25A
2
0
td(off)
tf
Ta=25C
VDD= 30V
VGS=10V
RG=10
Pulsed
100
10
tr
td(on)
1
0
2.5
5
7.5
10
GATE-SOURCE VOLTAGE : VGS[V]
Fig.11 Static Drain-Source On-State
Resistance vs. Gate Source Voltage
0.01
0.1
1
DRAIN-CURRENT : ID[A]
Fig.12 Switching Characteristics
Ciss
10
Crss
Coss
1
0.01
0.1
1
10
100
DRAIN-SOURCE VOLTAGE : VDS [V]
Fig.13 Typical Capacitance
vs. Drain-Source Voltage
www.rohm.com
c 2010 ROHM Co., Ltd. All rights reserved.
○
4/5
2010.04 - Rev.A
UM6K31N
Data Sheet
Measurement circuits
Pulse width
VGS
ID
VDS
RL
50%
10%
D.U.T.
RG
90%
50%
10%
VGS
VDS
VDD
10%
90%
td(on)
tr
ton
90%
td(off)
tf
toff
Fig.1-2 Switching waveforms
Fig.1-1 Switching time measurement circuit
Notice
This product might cause chip aging and breakdown under the large electrified environment.
Please consider to design ESD protection circuit.
www.rohm.com
c 2010 ROHM Co., Ltd. All rights reserved.
○
5/5
2010.04 - Rev.A
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010A