F12 A60 -S WT WTF12 F12A60 A60-S Bi-Directional Triode Thyristor Features � Repetitive Peak off -State Voltage:600V � R.M.S On-State Current(IT(RMS)=12A) � Isolation voltage(VISO=1500V AC) � High Commutation dv/dt General Description General purpose switching and phase control applications .These devices are intented to be interfaced directly to mirocontrollers,logic integrated circuits and other low power gate trigger circuits such as fan speed and temperature modulation control,lighting control and static switching relay. By using an internal ceramic pad, the TO220F series provides voltage insulated tab (rated at 2500V RMS) complying with UL standards (file ref.:E347423) Absolute Maximum Ratings (TJ=25℃ symbol unless otherwise specified) Parameter Ratings Units VDRM Peak Repetitive Forward Blocking Voltage(gate open) (Note1) 600 V IT(RMS) Forward Current RMS(All Conduction Angles, TJ=58℃) 12 A 119/130 A Circuit Fusing Considerations (tp=10ms) 71 A2s PGM Peak Gate Power —Forward,(TC=58℃,Pulse With≤1.0us) 5 W PG(AV) Average Gate Power —Forward,(Over any 20ms period) 0.5 W ITSM 2 It Peak Forward Surge Current, (1/2 Cycle, Sine Wave,50/60Hz) IFGM Peak Gate Current—Forward,TJ=125℃(20µs,120PPS) 2 A VRGM Peak Gate Voltage—Reverse,TJ=125℃(20µs,120PPS) 10 V TJ Junction Temperature -40~125 ℃ Tstg Storage Temperature -40~150 ℃ Note1.Although not recommended off -state voltages up to 800v ,may be applied with out damage, but the TRIAC may switch, to the on-state .the rate of rise of current should not exceed 3A/us. Thermal Characteristics Symbol Parameter Value Units RӨJC Thermal Resistance Junction to case 3.3 ℃/W RӨJA Thermal resistance Junction to Ambient 120 ℃/W Rev.A Oct.2011 Copyright@Winsemi Microelectronics Co., Ltd., All right reserved. A60 -S WTF12 F12A60 A60-S Electrical Characteristics(Tc=25℃ unless otherwise specified) Symbol Characteristics Min. Typ. Max. Unit Peak Forward or Reverse Blocking Current TC=25℃ - - 10 µA (VD=VDRM/VRRM) TC=125℃ - - 2 mA Forward "On" Voltage (Note2) (ITM=18A Peak @ TA =25℃) - - 1.4 V Gate Trigger Current (Continuous dc) T2+G+ - - 30 (VD=6 Vdc,RL=10 Ohms) T2+G- - - 30 T2-G- - - 30 Gate Trigger Voltage (Continuous dc) T2+G+ - - 1.5 (VD=6 Vdc,RL=10 Ohms) T2+G- - - 1.5 T2-G- - - 1.5 0.2 - - V - 500 - V/ µs - 10 - A/µs - 25 - mA IDRM VTM IGT VGT VGD dV/dt Gate threshold voltage (TJ=125℃,VD=0.5VDRM) Critical rate of rise of commutation Voltage(VD=0.67VDRM) mA V Critical rate of rise On-State voltage at Commutation (dv/dt)c (VD=400V,Tj=125℃,dIcom/dt=0.5A/µs) Holding Current IH (VD=12Vdc, intiationg current=20mA) Note2.Forward current applied for 1 ms maximum duration ,duty cycle 2/5 Steady, keep you advance A60 -S WTF12 F12A60 A60-S Fig .1 On-State Voltage vs on-State Current Fig.2 On-State current vs maximum Power Disspation Fig . 3 Gate Characteristeristics Fig.4 On-State Current vs Allowable case Temperature Fig.5 Surge On-State Current Ration (Non-Repetitive) Gig.6 Gate Trigger Current vs Junction Temperation 3/5 Steady, keep you advance A60 -S WTF12 F12A60 A60-S Gate Trigger Current vs Junction Fig.7 Fig.7Gate Junction.. Transient Thermal Impedance Fig.8 Fig.8Transient Fig.9 Gate Trigger Characteristics Test Circuit 4/5 Steady, keep you advance A60 -S WTF12 F12A60 A60-S 220F Package Dimension TOTO-220F Unit:mm 5/5 Steady, keep you advance