CALIBRATED LAMP LIGHT LIGHT SOURCE SERIES SOURCE L7810, L7810-02 (Xenon Lamp) L7820, L7820-02 (Deuterium Lamp) Easy to reproduce highly stable light!! L7810, L7810-02 Left: Lamp Housing Right: Power Supply TLSOF0151 L7820, L7820-02 Left: Lamp Housing Right: Power Supply TLSOF0159 These light sources deliver the extremely high levels of "stability" and "repeatability" essential to calibrated light sources. These are available as an optimal set including a lamp, lamp housing and power supply, so that anyone can easily reproduce a highly stable light output. The L7810-02 xenon lamp light source is calibrated over a wide spectral range from 200 nm to 800 nm, while the L7820-02 deuterium lamp light source is calibrated in the UV range from 200 nm to 400 nm. Since we are certified as an ASNITE-Calibration laboratory, we are capable of calibrating spectral irradiance over a wide range from 200 nm to 800 nm (L7810-02). The spectral range at wavelengths shorter than 250 nm is calibrated based on the ASNITE calibration system (Accreditation System of National Institute of Technology and Evaluation), while the spectral range at wavelengths longer than 250 nm is calibrated based on the JCSS (Japan Calibration Service System). As of August 2009, Hamamatsu Photonics is the only company certified as an ASNITE-Calibration laboratory in the "Light" field. Manufactured upon receiving your order. APPLICATIONS ●Light level control of light source ●Sensitivity control of optical sensor ●Light intensity measurement and studies of photoreactions (Light resistance, light curing, etc.) ●Quality control of photometric equipment (Medical analysis equipment, semiconductor inspection systems, imaging devices, etc) SPECIFICATIONS Type No. Lamp Input Wattage Spectral Distribution Calibrated ASNITE Calibration Range 1 JCSS Type of Calibration Calibration Unit Output Window Material (Lamp Housing) Output Window Diameter Optical Axis Height Warm-up Time Timer Input Voltage (AC) Power Consumption Cooling (Lamp Housing, Power Supply) Ambient Operating Temperature Operating Range Temperature During Calibration Humidity Dimensions Lamp Housing (excluding projecting parts) Power Supply (W × H × D) Carrying Case 2 Lamp Housing Weight Power Supply Total Weight 3 Recalibration Interval 4 Guaranteed Lamp Service Life 5 L7810 L7810-02 L7820 L7820-02 Deuterium lamp Xenon lamp 30 W 150 W 185 nm to 400 nm 185 nm to 2000 nm — — 200 nm to 245 nm (5 nm intervals) 200 nm to 245 nm (5 nm intervals) 250 nm to 400 nm (10 nm intervals) 250 nm to 800 nm (10 nm intervals) Spectral irradiance µW·cm-2·nm-1 Synthetic quartz 25 mm 28 mm 140 mm (150 mm including plastic feet) 10 minutes or more Hour display (lamp housing) Hour display (power supply) 100 V to 240 V, 50 Hz / 60 Hz 90 VA 350 VA Forced air cooling 0 °C to +40 °C +23 °C to +27 °C 20 % to 70 % (no condensation) 100 mm × 280 mm × 100 mm 117 mm × 90 mm × 200 mm 144 mm × 90 mm × 282 mm 480 mm × 380 mm × 205 mm Approx. 2.2 kg Approx. 2.9 kg Approx. 2.2 kg Approx. 3.2 kg Approx. 9.5 kg Approx. 11 kg 100 hours in operation 500 hours NOTE: 1Spectral irradiance is measured at a point 50 cm away from the reference plane of the lamp housing. 2Carrying case specially designed to contain one set of calibrated lamp light source and accessories. 3Total weight including a set of calibration lamp light source and carrying case. 4This is a general guide for recalibration to maintain calibration reliability. Please contact our sales office for recalibration fee. 5This is the total amount of time that the lamp can be recalibrated to serve as a calibrated light source. COMPARISON OF SPECTRAL IRRADIANCE (Reference Data) 50 cm away from the light source TLSOB0063EB 10 HIGH POWER 100 1 CONVENTIONAL HALOGEN LAMP 0.1 TLSOB0065EB 110 CALIBRATED XENON LIGHT SOURCE L7810 (250 nm to 800 nm) L7810-02 (200 nm to 800 nm) CALIBRATED DEUTERIUM LIGHT SOURCE L7820 (250 nm to 400 nm) L7820-02 (200 nm to 400 nm) WIDE SPECTRAL RANGE 0.01 RELATIVE INTENSITY (%) SPECTRAL IRRADIANCE (µW . cm-2. nm-1) 100 LIGHT INTENSITY DRIFT (Typ.) 90 HIGH STABILITY 80 70 60 50 40 30 20 10 0.001 200 250 300 350 400 450 500 550 600 650 700 750 800 0 10 20 30 WAVELENGTH (nm) ASNITE calibration This is the logo mark for the Accreditation System of National Institute of Technology and Evaluation (ASNITE), an independent administrative agency in Japan. NITE independently implements calibration standards based on international standards. 40 50 60 70 80 90 100 110 OPERATING TIME (h) JCSS In spectral regions not covered by the range specified by JCSS, NITE carries out accreditation to make calibration using international and foreign national standards. The Product Management Dept. of Hamamatsu Photonics K. K. was accredited as an ASNITE calibration company in the "Light" field on May 7, 2004 and is entitled to issue calibration certificates bearing the ASNITE logo mark (ASNITE accreditation symbol). This is the logo mark for the traceability system approved by the Japan Calibration Service System (JCSS) based on the Measurement Law. The Product Management Dept. of Hamamatsu Photonics K. K. was accredited as a calibration company in the "Light" field on May 21, 1999, and then became a registered company on August 4, 2009 according to the legal revisions. And is entitled to issue calibration certificates bearing the JCSS logo mark (JCSS accreditation symbol). Those calibration certificates assure the traceability to National Measurement Standards and can be used, for example, as a traceability certificate for ISO9000 series. DIMENSIONAL OUTLINES (Unit: mm) L7810, L7810-02 (Xenon Lamp) LAMP HOUSING 140 OUTPUT WINDOW 28 REFERRENCE SURFACE OF CALIBRATION 5 10 50 CONNECTOR * 77 SIDE VIEW 60 FRONT VIEW 280 COOLING FAN 100 5 100 BOTTOM VIEW M4 39 78 4-M4 Plastic feet attached as standard features. These can be removed to use their holes for installation of lamp housing. 39 78 TLSOA0066EC POWER SUPPLY FRONT VIEW SIDE VIEW REAR VIEW CONNECTOR * TIME COUNTER LAMP ON CALIBRATED XENON 90 LIGHT SOURCE POWER OUTPUT TIME COUNTER RESET OUTPUT CURRENT POWER INTER LOCK OVER HEAT 100-240V~350VA 50/60Hz (A dc) 144 282 COOLING FAN * For cable to connect lamp housing with power supply, length: 2 m TLSOA0090EB DIMENSIONAL OUTLINES (Unit: mm) L7820, L7820-02 (Deuterium Lamp) LAMP HOUSING COOLING FAN FRONT VIEW 280 60 SIDE VIEW 140 OUTPUT WINDOW 25 5 10 50 CONNECTOR * REFERRENCE SURFACE OF CALIBRATION 100 100 BOTTOM VIEW 39 78 4-M4 Plastic feet attached as standard features. These can be removed to use their holes for installation of lamp housing. 39 78 TLSOA0072ED POWER SUPPLY FRONT VIEW SIDE VIEW REAR VIEW CONNECTOR * CALIBRATED DEUTERIUM LIGHT SOURCE POWER POWER OUTPUT 90 LAMP OUTPUT 117 200 * For cable to connect lamp housing with power supply, length: 1.8 m WARRANTY COOLING FAN TLSOA0091EB This device is guaranteed for one year after delivery date from us. The warranty extends only to replacement of the products. The warranty dose not cover damage due to misuse of natural calamity. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2009 Hamamatsu Photonics K.K. WEB SITE www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] TLSO1054E04 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected] OCT. 2009 IP