POWERSEM PSHM4006

ECO-PACTM 2
CoolMOS Power MOSFET
in ECO-PAC 2
ID25
VDSS
RDSon
PSHM 40/06
N-Channel Enhancement Mode
Low RDSon, High VDSS MOSFET
Package with Electrically Isolated Base
= 38 A
= 600 V
Ω
= 70 mΩ
1)
L4
L6
L9
P18
R18
K12
A1
E10
F10
NTC
Preliminary Data Sheet
K13
MOSFET
Symbol
VDSS
VGS
ID25
ID90
dv/dt
EAS
EAR
Symbol
RDSon
VGSth
IDSS
IGSS
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
VF
RthJC
Conditions
TVJ = 25°C to 150°C
TC = 25°C
TC = 90°C
VDS < VDSS; IF ≤ 50A;diF/dt≤ 200A/µs
TVJ = 150°C
ID = 10 A; L = 36 mH; TC = 25°C
ID = 20 A; L = 5 µH; TC = 25°C
Features
Maximum Ratings
600
V
±20
V
38
A
25
A
6
V/ns
1.8
1
•
ECO-PAC 2 with DCB Base
- Electrical isolation towards the
heatsink
- Low coupling capacitance to the heatsink
for reduced EMI
- High power dissipation
- High temperature cycling capability
of chip on DCB
- solderable pins for DCB mounting
•
fast CoolMOS power MOSFET - 2nd generation
- High blocking capability
- Low on resistance
- Avalanche rated for unclamped
inductive switching (UIS)
- Low thermal resistance
due to reduced chip thickness
•
•
Enhanced total power density
UL registered, E 148688
J
mJ
Conditions
Characteristic Values
(TVJ = 25°C, unless otherwise specified)
min.
typ. max.
VGS = 10 V; ID = ID90
70 m Ω
VDS = 20 V; ID = 3 mA;
3.5
5.5
V
VDS = VDSS; VGS = 0 V; TVJ = 25°C
25 µA
TVJ = 125°C
60
µA
VGS = ±20 V; VDS = 0 V
100 nA
220
nC
55
nC
VGS= 10 V; VDS = 350 V; ID = 50 A
125
nC
30
ns
95
ns
VGS= 10 V; VDS = 380 V;
100
ns
ID = 25 A; RG = 1.8 Ω
10
ns
(reverse conduction) IF = 20 A; VGS = 0 V
0.9
1.1
V
per MOSFET
0.45 K/W
Applications
•
•
•
•
•
Switched mode power supplies (SMPS)
Uninterruptible power supplies (UPS)
Power factor correction (PFC)
Welding
Inductive heating
Advantages
•
•
•
Data according to IEC 60747 refer to a single diode or transistor unless otherwise stated
•
•
Caution: These Devices are sensitive
to electrostatic discharge. Users should
observe proper ESD handling precautions.
1)
Easy to mount with two screws
Space and weight savings
Improved temperature and power
cycling capability
High power density
Small and light weight
CoolMOS is a trademark of Infineon Technologies AG.
 2003 POWERSEM reserves the right to change limits, test conditions and dimensions
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
ECO-PACTM 2
Temperature Sensor NTC
Symbol
Conditions
R25
B25/50
T = 25°C
Characteristic Values
min. typ. max.
4.75
5.0
5.25 kΩ
3375
K
Dimensions in mm (1 mm = 0.0394")
Module
Symbol
TVJ
Tstg
VISOL
Md
Conditions
a
Max. allowable acceleration
Symbol
Conditions
dS
dA
Weight
Creepage distance on surface (Pin to heatsink)
Strike distance in air (Pin to heatsink)
IISOL ≤ 1 mA; 50/60 Hz; t = 1 s
Mounting torque (M4)
Maximum Ratings
-40...+150
-40...+125
3600
1.5 - 2.0
14 - 18
50
°C
°C
V~
Nm
lb.in.
m/s 2
Characteristic Values
min. typ. max.
11.2
mm
11.2
mm
24
g
 2003 POWERSEM reserves the right to change limits, test conditions and dimensions
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20