RECTRON 2SB709A SEMICONDUCTOR TECHNICAL SPECIFICATION SOT-23 BIPOLAR TRANSISTORS TRANSISTOR(PNP) FEATURES * Power dissipation PCM : 0.2 W(Tamb=25OC) SOT-23 COLLECTOR 3 MECHANICAL DATA * * * * * BASE Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.008 gram 0.055(1.40) 0.047(1.20) 1 2 EMITTER 0.006(0.15) 0.003(0.08) 0.043(1.10) 0.035(0.90) 0.020(0.50) 0.012(0.30) 0.004(0.10) 0.000(0.00) 0.100(2.55) 0.089(2.25) 0.020(0.50) 0.012(0.30) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 1 0.019(2.00) 0.071(1.80) O Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. 0.118(3.00) 0.110(2.80) 3 2 For capacitive load ,derate current by 20%. Dimensions in inches and (millimeters) o MAXIMUM RATINGS ( @ TA = 25 C unless otherwise noted ) SYMBOL VALUE UNITS Collector-base voltage CHARACTERISTICS VCBO -45 V Collector-emitter voltage VCEO -45 V Emitter-base voltage VEBO -7 V IC -200 mA TJ,Tstg -55-150 Collector current-continuous Junction and Storage temperature O C o ELECTRICAL CHARACTERISTICS ( @ TA = 25 C unless otherwise noted ) MIN MAX UNITS Collector-base breakdown voltage (IC= -10mA, IE=0) V(BR)CBO -45 - V Collector-emitter breakdown voltage (IC= -2mA, IB=0) V(BR)CEO -45 - V Emitter-base breakdown voltage (IE= -10mA, IC=0) V(BR)EBO -7 - V CHARACTERISTICS SYMBOL Collector cut-off current (VCB= -20V, IE=0) ICBO - -0.1 mA Emitter cut-off current (VCE= -10V, IB=0) ICEO - -100 mA DC current gain (VCE= -10V, IC= -2mA) hFE 160 460 - VCE(sat) Collector-emitter saturation voltage (IC= -100mA, IB= -10mA) Transition frequency (VCE= -10V, IC= -1mA, f= 200MHZ) Collector output capacitance (VCB= -10V, IE= 0, f= 1MHz) - -0.5 V fT 60 - MHz Cob - 2.7 PF CLASSIFICATION OF hFE RANK Q R S Range 160-260 210-340 290-460 Marking BQ1 BR1 BS1 2006-3 240 -120 200 IC, COLLECTOR CURRENT (mA) PC, COLLECTOR POWER DISSIPATION (mW) RATING AND CHARACTERISTICS CURVES ( 2SB709A) 160 120 80 40 0 0 20 40 60 80 100 120 140 O TA= 25 C -100 -80 IB= -300uA -60 IB= -250uA IB= -200uA -40 IB= -150uA IB= -100uA -20 IB= -50uA 0 0 160 -2 TA, AMBIENT TMEPERATURE (OC) Figure1 PC-TA -8 -10 -12 Figure2 IC-VCE VCE= 5V TA= 25 OC -350 IB, BASE CURRENT (uA) -50 -40 -30 -20 -10 -300 -250 -200 -150 -100 -50 0 -150 -300 0 0 -450 -0.6 IB, BASE CURRENT (uA) -1.2 -1.8 VBE, BASE TO EMITTER VOLTAGE (V) Figure3 IC-IB Figure4 IB-VBE -240 IC, COLLECTOR CURRENT (uA) IC, COLLECTOR CURRENT (mA) -6 -400 -60 0 -4 VCE, COLLECTOR TO EMITTER VOLTAGE(V) VCE= -5V -200 TA= 75 C O 25OC -25 C O -160 -120 -80 -40 0 0 -0.4 -0.8 -1.2 -1.6 -2.0 VBE, BASE TO EMITTER VOLTAGE (V) Figure5 IC-VBE RECTRON VCE(sat), COLLECTOR TO EMITTER SATURATION VOLTAGE (V) -10 IC/IB=10 -3 -1 25OC -0.3 -0.1 TA= 75 OC -25OC -0.03 -0.01 -0.003 -0.001 0 20 40 60 80 100 120 140 160 hFE, FORWARD CURRENT TRANSFER RATIO RATING AND CHARACTERISTICS CURVES ( 2SB709A) 600 VCE= -10V 500 400 TA= 75 OC 300 25OC -25OC 200 100 0 -1 -3 IC, COLLECTOR CURRENT (mA) VCE= -10V TA= 25 OC 120 100 80 60 40 20 -1 -3 -10 -30 -100 -100 -300 -300 -1000 8 -1000 IE= 0 f= 1MHz TA= 25 OC 7 6 5 4 3 2 1 0 -1 -3 IE, EMITTER CURRENT (mA) -10 -30 -100 VCB, COLLECTOR TO BASE VOLTAGE (V) Figure8 fT-IE Figure9 Cob-VCB 6 VCB= -5V f= 1KHz Rg= 2KW TA= 25 OC 5 NF, NOISE FIGURE (dB) fT, TRANSITION FREQUENCY (MHz) 160 0 -30 Figure7 hFE-IC Cob, COLLECTOR OUTPUT CAPACITANCE (pF) Figure6 VCE(sat)-IC 140 -10 IC, COLLECTOR CURRENT (mA) 4 3 2 1 0 0.01 0.03 0.1 0.3 1 3 10 IE, EMITTER CURRENT (mA) Figure10 NF-IE RECTRON RATING AND CHARACTERISTICS CURVES ( 2SB709A) 20 16 14 h PARAMETER f= 100Hz 1KHz 10 hfe 100 12 8 10KHz 6 4 30 hoe (uS) 10 hje (KW) 3 2 0 0.1 0.3 1 3 1 10 VCE= -5V f= 270Hz TA= 25 OC hre (x10-4) 0.1 0.3 IE, EMITTER CURRENT (A) 1 3 10 IE, EMITTER CURRENT (V) Figure11 NF-IE Figure12 h PARAMETER-IE 300 IE= 2mA f= 270Hz TA= 25 OC hfe 100 h PARAMETER NF, NOISE FIGURE (dB) 300 VCB= -5V Rg= 50KW TA= 25 OC 18 30 hoe (uS) 10 hre (x10 -4) 3 1 -1 -3 hje (KW) -10 -30 -100 VCE, COLLECTOR TO EMITTER VOLTAGE (V) Figure13 h PARAMETER-VCE RECTRON DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. RECTRON