PRELIMINARY PRODUCT INFORMATION GaAs INTEGRATED CIRCUIT uPG2181T5R HIGH POWER DP4T SWITCH FOR WiMAX DESCRIPTION The uPG2181T5R is a GaAs MMIC high power DP4T switch which was developed for WiMAX. This device can operate from 2.3GHz to 3.8GHz, with low insertion loss and high isolation. This device is housed in a 20-pin RQFN Rectangle Quad Flat Non-Leaded package, and this is suitable for high-density surface mounting. FEATURES Supply Voltage Control Voltage Low Insertion Loss High Isolation Power Handling High-density surface mounting : VDD = 2.8 to 3.2V 3.0V TYP. : Vcont H = 1.5 to VDD VDD TYP. : Vcont L = 0 to 0.2V 0V TYP. : Lins1 = 0.8dB TYP. @ f = 2.3 to 2.7GHz, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : Lins2 = 1.0dB TYP. @ f = 3.3 to 3.8GHz, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : ISL1 = 28dB TYP.@ f = 2.3 to 2.7GHz, TX to RX, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : ISL2 = 24dB TYP.@ f = 3.3 to 3.8GHz, TX to RX, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : ISL3 = 25dB TYP.@ f = 2.3 to 2.7GHz, TX to ANT, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : ISL4 = 21dB TYP.@ f = 3.3 to 3.8GHz, TX to ANT, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : ISL5 = 25dB TYP.@ f = 2.3 to 2.7GHz, RX to ANT, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : ISL6 = 22dB TYP.@ f = 3.3 to 3.8GHz, RX to ANT, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : Pin 1dB = +40.0dBm TYP.@ f = 2.5/3.5GHz, TX to ANT, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : Pin 1dB = +35.0dBm TYP.@ f = 2.5/3.5GHz, RX to ANT, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : 20-pin RQFN package 2.5 3.5 0.6 mm APPLICATION Antenna Switch for WiMAX CPE (Customer Premises Equipment) ORDERING INFORMATION Part Number uPG2181T5R – E2 Order Number uPG2181T5R – E2 A Package Marking 20-pin plastic RQFN Pb-Free 2181 Supplying Form Embossed tape 8 mm wide Pin1,6 face the perforation side of the tape Qty 3 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. Part number for sample order : uPG2181T5R-A Caution Electro-static sensitive devices The information in this document is being issued in advance of the production cycle for device. The parameters for the device may change before final production or NEC Compound Semiconductor Devices, at its own discretion, may withdraw the device prior to its production. Document No. PG*****EJW2V0PM ( 4th edition ) Date Published July 2007 C NEC Electronics Corporation 2007 uPG2181T5R PIN CONNECTIONS Top View Bottom View Pin NO. Pin Name Pin No. Pin Name 16 15 14 13 12 11 11 12 13 14 15 16 1 GND 11 GND 2 GND 12 ANT1 3 Rx 13 GND 17 10 10 17 18 9 9 8 18 19 4 GND 14 Tx 7 20 5 ANT4 15 GND 6 GND 16 GND 7 ANT3 17 VDD 8 GND 18 Vcont2 9 GND 19 Vcont1 10 ANT2 20 Vcont0 2181 19 8 20 7 1 2 3 4 5 6 6 5 4 3 2 1 Exposed pad : GND TRUTH TABLE CONTROL VOLTAGE ON PATH Tx 2 Rx VDD Vcont0 Vcont1 Vcont2 ANT1 ANT2 ANT3 ANT4 ANT1 ANT2 ANT3 ANT4 High Low Low Low ON OFF OFF OFF OFF OFF OFF OFF High High Low Low OFF ON OFF OFF OFF OFF OFF OFF High Low High Low OFF OFF ON OFF OFF OFF OFF OFF High High High Low OFF OFF OFF ON OFF OFF OFF OFF High Low Low High OFF OFF OFF OFF ON OFF OFF OFF High High Low High OFF OFF OFF OFF OFF ON OFF OFF High Low High High OFF OFF OFF OFF OFF OFF ON OFF High High High High OFF OFF OFF OFF OFF OFF OFF ON Preliminary Product Information uPG2181T5R ABSOLUTE MAXIMUM RATINGS (TA = +25ഒXnless otherwise specified) Parameter Symbol Ratings Unit Supply Voltage VDD 4.2 V Switch Control Voltage Vcont 4.2 V Input Power-Tx (ON Port) Pin-Tx +41 dBm Input Power-Rx (ON Port) Pin-Rx +36 dBm Input Power-Tx (OFF Port) Pin-Tx (OFF) +25 dBm Input Power-Rx (OFF Port) Pin-Rx (OFF) +25 dBm Power Dissipation PD 800 mW Operating Ambient Temperature TA -45 to +85 ഒ Storage Temperature Tstg -55 to +150 ഒ RECOMMENDED OPERATING RANGE (TA = +25ഒXnless otherwise specified) Parameter Operating Frequency Supply Voltage Symbol MIN. TYP. MAX. Unit fopt1 2.3 - 2.7 GHz fopt2 3.3 - 3.8 GHz VDD 2.8 3.0 3.2 V Switch Control Voltage H Vcont H 1.5 VDD VDD V Switch Control Voltage L Vcont L 0 0 0.2 V Preliminary Product Information 3 uPG2181T5R ELECTRICAL CHARACTERISTICS (TA = +25ഒ, Vcont (H) = 3.0V, Vcont (L) = 0V, DC blocking capacitor = 6pF, Z0 = 50˖, unless otherwise specified) Parameter Symbol Conditions MIN. TYP. MAX. Insertion Loss1 Lins1 f = 2.3 to 2.7GHz, Tx to ANT1/2/3/4 - 0.80 1.05 dB Insertion Loss2 Lins2 f = 3.3 to 3.8GHz, Tx to ANT1/2/3/4 - 1.00 1.30 dB Insertion Loss3 Lins3 f = 2.3 to 2.7GHz, Rx to ANT1/2/3/4 - 0.80 1.05 dB Insertion Loss4 Lins4 f = 3.3 to 3.8GHz, Rx to ANT1/2/3/4 - 1.00 1.30 dB Isolation1 ISL1 f = 2.3 to 2.7GHz, Tx to Rx 25 28 - dB Isolation2 ISL2 f = 3.3 to 3.8GHz, Tx to Rx 21 24 - dB Isolation3 ISL3 f = 2.3 to 2.7GHz, Tx to ANT1/2/3/4 22 25 - dB Isolation4 ISL4 f = 3.3 to 3.8GHz, Tx to ANT1/2/3/4 18 21 - dB Isolation5 ISL5 f = 2.3 to 2.7GHz, Rx to ANT1/2/3/4 22 25 - dB Isolation6 ISL6 f = 3.3 to 3.8GHz, Rx to ANT1/2/3/4 19 22 - dB On Port Return Loss1 RLin1 f = 2.3 to 2.7GHz, All port - 15 - dB On Port Return Loss2 RLin2 f = 3.3 to 3.8GHz, All port - 15 - dB Unused Port Return Loss1 URLin1 f = 2.3 to 2.7GHz, Tx / Rx port - 13 - dB Unused Port Return Loss2 URLin2 f = 3.3 to 3.8GHz, Tx / Rx port - 13 - dB 1dB Loss Compression Input PowerNote Pin f = 2.5GHz, Tx to ANT1/2/3/4 - +40.0 - dBm f = 3.5GHz, Tx to ANT1/2/3/4 - +40.0 - dBm f = 2.5GHz, Rx to ANT1/2/3/4 - +35.0 - dBm f = 3.5GHz, Rx to ANT1/2/3/4 - +35.0 - dBm OIP3 1 f = 2.5GHz, Tx to ANT1/2/3/4 - +63.0 - dBm OIP3 2 f = 2.5GHz, Rx to ANT1/2/3/4 - +57.0 - dBm 3rd Order Output Intercept Point Supply Current IDD RF None - 600 1100 uA Switch Control Current Icont RF None - 1 2 uA Switch Control Speed tSW 50% CTL to 90/10% RF - 250 - ns Note. Pin 4 1dB 1dB is measured the input power level when the insertion loss increases more 1dB than that of linear range. Preliminary Product Information uPG2181T5R EVALUATION CIRCUIT ANT1 Tx VDD 6pF 1000pF 16 6pF 15 14 13 12 11 6pF 17 ANT2 10 18 Vcont2 1000pF 9 19 Vcont1 8 1000pF 20 ANT3 7 1 2 3 4 5 6 6pF 6pF 6pF 1000pF Vcont0 Rx ANT4 The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. Preliminary Product Information 5 uPG2181T5R MOUNTING PAD DIMENSIONS 20-PIN PLASTIC RQFN UNIT: mm MOUNTING PAD Remark The mounting pad layouts in this document are for reference only. 6 Preliminary Product Information uPG2181T5R PACKAGE DIMENSIONS 20-PIN PLASTIC RQFN UNIT: mm 6 Preliminary Product Information uPG2181T5R Preliminary Product Information 7 uPG2181T5R July, 2007. 8 Preliminary Product Information 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.