MMD MVQI_12

MVQI Series 5X7 Ceramic SMD VCXO
 User Selectable Up to Two Frequencies
 LVDS, LVPECL OR CMOS
 6 Pad Standard Package
 OneClock 
Frequency Range CMOS
10MHZ to 250MHZ
50.000MHZ to 1.50GHZ
Frequency Range LVDS & LVPECL
Temperature Stability*
(See Part Number Guide for Options)
Operating Temperature Range
(See Part Number Guide for Options)
Storage Temperature Range
-55°C to +125°C
Aging (+25°C ±3°C)
±5ppm for first year
Waveform
LVPECL
+2.50 VDC
Supply Voltage ±5% (Vdd)
+3.30 VDC
54mA typ
Supply Current
Load
CMOS
50Ω
LVDS
+2.50 VDC
+3.30 VDC
+2.50 VDC
+3.30 VDC
20mA typ
25mA typ
23mA typ
15pF
10 TTL
Gates or
30pF
100Ω
Vol
.800V typ
1.60V typ
10% Vdd max
1.1V typ
0.9V typ
Voh
1.55V typ
2.35V typ
90% Vdd min
1.5V typ
1.6V typ
.400V typ
.450V typ
.750V typ
Differential Voltage
Rise/Fall Time (10% to 90% of Supply Voltage)
Symmetry (50% of waveform)
250pSec max
4nSec
350pSec max
(See Part Number Guide for Options)
Start-up Time
10mSec max
Period Jitter (RMS)
<2.5pSec
Phase Jitter (12KHZ to 20MHZ)
<1.0pSec typ
Tri-State Operation (Single Frequency Output only)
Control Voltage (Vc)
Vih = 70% of Vdd min to Enable Output
Vil = 30% max or grounded to Disable Output (High Impedance)
1.25 VDC
1.65 VDC
1.25 VDC
1.65 VDC
1.25 VDC
1.65 VDC
±1.00 VDC
±1.50 VDC
±1.00 VDC
±1.50 VDC
±1.00 VDC
±1.50 VDC
Pullability
±100ppm
Linearity
10%
Tristate Current Consumption (Disabled)
16mA
Absolute Maximum Voltage (Vdd)
4.20 Volts DC
* Inclusive of Temperature., Load and Voltage
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Revision:
Subject to change without notice
06/30/11 C
Pg 1 of 5
Mechanical & Environmental Detail
Shock
Marking Detail
Line 1 = MXXXXX
MIL-STD-883, Method 2002 Cond B
Solderability
MIL-STD-883, Method 2003
Solvent Resistance
MIL-STD-202, Method 215
M
=
MMD
XXXXX
=
Frequency in MHZ
=
Internal Code
=
4 Digit Date Code (Year /
Week)
=
Denotes RoHS Compliant
Line 2 = SYYWWL
S
Vibration
MIL-STD-883, Method 2007, Cond A
YYWW
Gross Leak Test
MIL-STD-883, Method 1014, Cond C
L
Fine Leak Test
MIL-STD-883, Method 1014, Cond A2
MSL
Line 3 = XXXXX
Internal use only
May vary with lots
Level 1 per IPC/JEDEC J-STD 20
Black dot to denote Pin 1
Part Number Guide
**Frequency
MVQI
5 X 7 Ceram ic SM D
Frequency
Stability
Output
C = CMOS
L = LVPECL
V = LVDS
Supply Voltage
2 = +2.5 VDC
3 = +3.3 VDC
010
015
020
025
050
100
=
=
=
=
=
=
±10 ppm
±15 ppm
±20 ppm
±25 ppm
±50 ppm
±100 ppm
Sym m etry
Blank = 40/60%
A = 45/55%
Packaging
Blank = Bulk
T = Tape and Reel
Operating Tem perature
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
Please Consult with MMD Sales Department for any other Parameters or Options
**Up to Two Frequencies can be selected
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Revision:
Subject to change without notice
06/30/11 C
Pg 2 of 5
Mechanical Details
7.20 [.283]
MAX
MXXXXX
SYYWW
XXXXX
2.00 [.079]
MAX
2.54 [.100]
5.20 [.205]
MAX
2.54 [.100]
4
5
6
3
2
1
2.54 [.100]
4.20 [.165]
2.40 [.094]
1.30 [.051]
PIN 1 INDICATOR
2.54 [.100]
2.00 [.079]
1.80 [.071]
1.40 [.055]
DIMENSIONS IN BRACKETS ARE IN INCHES
EXTERNAL BYPASS CAPACITOR RECOMMENDED
SUGGESTED
LAND PATTERN
Pin Connections
Pin 1
Pin 2*
Pin 3
Pin 4
Pin 5**
Pin 6
Vc
Tristate or Freq Select
Ground
Output
Complimentary Output ONLY LVPECL & LVDS
Supply Voltage
Dual Frequency Truth Table
Single Frequency Truth Table
Pin 1
Pin 2
Corresponding Frequency
Vc
Tristate
Frequency 1
Pin 1
Pin 2
Corresponding Frequency
Vc
Vc
Logic '0'
Logic '1'
Frequency 1
Frequency 2
*No Tristate available with Dual Frequency Option
** CMOS is No Connection
Typical Phase Noise
Offset Frequency
CMOS
70.000MHZ
LVPECL/LVDS
160.000MHZ
LVPECL/LVDS
622.000MHZ
100Hz
-88dBc/Hz
-85dBc/Hz
-80dBc/Hz
1KHz
-115dBc/Hz
-100dBc/Hz
-97dBc/Hz
10KHz
-120dBc/Hz
-115dBc/Hz
-117dBc/Hz
100KHz
-125dBc/Hz
-118dBc/Hz
-128dBc/Hz
1MHz
-130dBc/Hz
-128dBc/Hz
-138dBc/Hz
10MHz
-145dBc/Hz
-145dBc/Hz
-145dBc/Hz
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Revision:
Subject to change without notice
06/30/11 C
Pg 3 of 5
Test Set Up
Frequency
Voltage
Control
OE
or Fs
Vc
Tristate*
*Pin 2 is frequency select with dual frequency oscillators
Frequency
Control
Voltage
OE
or Fs
Vc
Tristate*
*Pin 2 is frequency select with dual frequency oscillators
Vc
OE
or Fs
Frequency
Voltage
Control
Tristate*
*Pin 2 is frequency select with dual frequency oscillators
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Revision:
Subject to change without notice
06/30/11 C
Pg 4 of 5
Tape & Reel Dimensions
PITCH
TAPE WIDTH
REEL DIA
Q1 Q2
Q3 Q4
Q1 Q2
Q3 Q4
PITCH
TAPE WIDTH
REEL DIA
QTY PER REEL
PIN 1 ORIENT.
8.00 [.315]
16.00 [.630]
180[7 IN]
1000
Q1
NOTES: UNLESS OTHERWISE SPECIFIED
1. Applicable Standards / Specifications
ANSI Y14.5M, Dimensions and Tolerances
EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm
Punched Carrier Taping of Surface Mount Components for Automatic Handling.
2. Dimensions are in millimeters.
3. Tolerances are ±0.10 [.004] mm unless otherwise specified.
4. Do not scale drawing.
DIRECTION OF FEED
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Revision:
Subject to change without notice
06/30/11 C
Pg 5 of 5