GR874 Sexless Connector Crimp/Solder Attachment For RG214, RG9, RG225, RG393 TECHNICAL DATA SHEET PE4352 GR874 Sexless Connector Crimp/Solder Attachment For RG214, RG9, RG225, RG393 Configuration Connector Connector Specification Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style GR874 Sexless MIL-C-39012 RG214,RG9,RG225,RG393 Crimp/Solder Straight Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Temperature Operating Range, deg C -65 to +165 Size Length, in [mm] Width/Dia., in [mm] 1.95 [49.53] 0.81 [20.57] Weight, lbs [g] 0.068 [30.84] Connector Type Contact Material and Plating Contact Plating Specification Body Material and Plating Dielectric Type GR874 Sexless Silver QQ-S-365 Brass, Nickel Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level GR874 Sexless Connector Crimp/Solder Attachment For RG214, RG9, RG225, RG393 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: GR874 Sexless Connector Crimp/Solder Attachment For RG214, RG9, RG225, RG393 PE4352 URL: http://www.pasternack.com/gr874-sexless-standard-rg214-rg9-rg225-rg393-connector-pe4352-p.aspx PE4352 REV 1 © 2013 Pasternack Enterprises All Rights Reserved PE4352 REV CONTACT: SOLDER FERRULE: .429" HEX CRIMP TOOL CRIMP SIZE REQUIRED 3. INSTALL RING (5) ON EXTENSION (4) INSERT CONTACT (7) THRU PTFE (6) TOGETHER SCREW IN TO CONTACT (3) ALIGN SLOTTED, PUSH BODY (8) OVER ASSEMBLY UNTIL PTFE (6) BOTTOMS ON TO BODY SHOULDER. SCREW NUT (2) SECURELY THEN CRIMP FERRULE (1). 2. SOLDER CONTACT (3) TO CENTER CONDUCTOR. FLAIR BRAID BACK, INSERT EXTENSION (4) OVER CONTACT (3) & DIELECTRIC. SLIDE FERRULE (1) OVER BRAID AGAINST EXTENSION (4). 1. STRIP CABLE TO DIMENSION SHOWN SLIDE FERRULE (1) & NUT (2) OVER CABLE. ASSEMBLY PROCEDURES REV. - CAD FILE 050802 SCALE N/A SIZE A 2233 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4352 DWG TITLE GR874 Sexless Connector Crimp/Solder Attachment For RG214, RG9, RG225, RG393 PE4352 CAD Drawing 2