BNC Twinax Jack Connector Crimp/Solder Attachment For RG108, 78 Ohm Twinax TECHNICAL DATA SHEET PE4235 BNC Twinax Jack Connector Crimp/Solder Attachment For RG108, 78 Ohm Twinax Configuration Connector Connector Specification Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style BNC Twinax Jack MIL-C-39012 RG108,78 Ohm Twinax Crimp/Solder Straight Electrical Specifications Impedance, Ohms 78 Mechanical Specifications Temperature Operating Range, deg C -65 to +165 Size Length, in [mm] Width/Dia., in [mm] 1.6 [40.64] 0.57 [14.48] Weight, lbs [g] 0.041 [18.6] Connector Type Contact Material and Plating Contact Plating Specification Body Material and Plating Dielectric Type BNC Twinax Jack Silver QQ-S-365 Brass, Nickel Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level BNC Twinax Jack Connector Crimp/Solder Attachment For RG108, 78 Ohm Twinax from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: BNC Twinax Jack Connector Crimp/Solder Attachment For RG108, 78 Ohm Twinax PE4235 URL: http://www.pasternack.com/bnc-twinax-jack-standard-rg108-78-ohm-twinax-connector-pe4235-p.aspx PE4235 REV 1 © 2013 Pasternack Enterprises All Rights Reserved PE4235 REV * WHEN SOLDERING CONTACTS MAKE SURE SAME SEX IS ON BOTH ENDS OF WIRE IDENTIFIED BY THE BARE COPPER WIRE. FERRULE: .255" HEX CRIMP TOOL CRIMP SIZE REQUIRED 3. SLIDE ASSEMBLY FORWARD INTO BODY & TIGHTEN. CRIMP FERRULE. REV. - CAD FILE 042309 SCALE N/A SIZE A 147 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4235 DWG TITLE 2. SOLDER CONTACTS (4) TO CENTER CONDUCTOR THROUGH HOLE IN CONTACT. SLIDE FRONT INSULATOR (5) OVER CONTACTS. 1. SLIDE FERRULE (1) ONTO CABLE. STRIP CABLE TO DIMENSIONS SHOWN. SLIDE EXTENSION (2) BETWEEN BRAID & DIELECTRIC. SLIDE FERRULE OVER BRAID. SLIDE REAR INSULATOR (3) OVER CENTER CONDUCTORS & DIELECTRICS RESTING AGAINST EXTENSION (2). ASSEMBLY PROCEDURES BNC Twinax Jack Connector Crimp/Solder Attachment For RG108, 78 Ohm Twinax PE4235 CAD Drawing 2