Ordering number : ENA1408B Bi-CMOS LSI LV49152V Class-D Audio Power Amplifier BTL 15W × 2ch Overview The LV49152V is a 15W per channel stereo digital power amplifier that takes analog inputs. The LV49152V uses unique SANYO-developed feedback technology to achieve excellent audio quality despite being a class D amplifier and can be used to implement high quality flat display panel (FDP) based systems. Features • BTL output, class D amplifier system • Unique SANYO-developed feedback technology achieves superb audio quality • High-efficiency class D amplifier • Soft muting function reduces impulse noise at power on/off • Full complement of built-in protection circuits : over current protection, thermal protection, and low power supply voltage protection circuits • Built in Power limiter Functions • Power : 15W × 2ch output (VD = 15V, RL = 8Ω, fin = 1kHz, AES17, THD + N = 10%) • Efficiency : 93% (VD = 15V, RL = 8Ω, fin = 1kHz, PO = 15W) • THD + N : 0.08% (VD = 15V, RL = 8Ω, fin = 1kHz, PO = 1W, Filter : AES17) : 90μVrms (Filter : A-weight) • Noise • Package SSOP44J (275mil) Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. N0409 SY / 40109 MS 20090312-S00013 / 21809 MS PC No.A1408-1/24 LV49152V Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Symbol Conditions Maximum supply voltage VD Supply voltage Allowable power dissipation Pd max Package thermal resistance θjc Maximum junction temperature Tj max Operating temperature Storage temperature Ratings Unit 20 V Our PCB, Soldered * 5.05 W Our PCB, Soldered * 2.1 °C/W 3.6 °C/W 150 °C Topr -25 to +75 °C Tstg -50 to +150 °C Our PCB, Not soldered * * : Mounted on a specified board 110.0mm × 100.0mm × 1.5mm, glass epoxy (two-layer) Recommended Operating Range at Ta = 25°C Parameter Symbol Ratings Conditions min typ Unit max Supply voltage range VD Supply voltage 9 15 Load impedance range RL Speaker load 4 8 18 V Ω Electrical Characteristics at Ta = 25°C, VD = 15V, RL = 8Ω, L = 33μH (TOKO : A7502BY-330M), C = 0.1μF, CL = 0.47μF Parameter Symbol Ratings Conditions min typ Unit max Standby current Ist STBY = L, MUTE = L 1 10 μA Mute current Imute STBY = H, MUTE = L 14 20 26 mA Quiescent current ICCO STBY = H, MUTE = H 35 45 55 mA Voltage gain VG fin = 1kHz, VO = 0dBm 28 30 32 dB Offset voltage Voffset Rg = 0 150 mV Total harmonic distortion THD+N PO = 1W, fin = 1kHz, AES17 0.4 % Output power PO@10% THD+N = 10%, AES17 13 15 W Channel separation CHsep. Rg = 0, VO = 0dBm, DIN AUDIO 55 70 dB Ripple rejection ratio SVRR fr = 100Hz, Vr = 0dBm, Rg = 0, DIN AUDIO 50 60 dB Noise VNO Rg = 0, A-weight 300 μVrms High-level input voltage VIH STBY and MUTE pin 3 VD V Low-level input voltage VIL STBY and MUTE pin 0 1 V -150 0.08 90 Under voltage protection UPPER UV_UPPER VD voltage measure 8.0 V Under voltage protection LOWER UV_LOWER VD voltage measure 7.0 V Note : The values of these characteristics were measured in the SANYO test environment. The actual values in an end system will vary depending on the printed circuit board pattern, the external components actually used, and other factors. No.A1408-2/24 LV49152V Package Dimensions unit : mm (typ) 3285 TOP VIEW BOTTOM VIEW Exposed Die-Pad 15.0 23 0.5 5.6 7.6 44 1 22 0.22 0.65 0.2 1.7max (0.68) (1.5) SIDE VIEW SANYO : SSOP44J(275mil) Allowable power dissipation, Pd max - W 8 Pd max - Ta Mounted on a specified board : 110.0 × 100.0 × 1.5mm3 glass epoxy (two-layer) 6 Soldered = 5.05W 4 Not Soldered = 3.35W 2 0 —25 0 25 50 75 100 125 150 Ambient temperature, Ta - C PVD1 PVD1 OUT1+ OUT1+ BOOT1+ VDD1 BOOT1- OUT1- OUT1- PGND1 PGND1 PGND2 PGND2 OUT2- OUT2- BOOT2- VDD2 BOOT2+ OUT2+ OUT2+ PVD2 PVD2 Pin Assignment 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 MUTE STBY VIN1+ VIN1- PLC VIN2- VIN2+ MUTECAP VCC BIASCAP VBIAS VREG5 GND NC NC NC NC NC NC NC NC NC LV49152 Top view No.A1408-3/24 LV49152V Block Diagram and Application Circuit Example 1 (RL = 8Ω) 470μF + 0-5V 1 2 0-5V 1μF VIN1+ 1μF 1μF VIN 2+ + 1μF 1μF 4 6 8 9 10 1μF 11 1μF PVD1 FB 12 1μF 13 14 15 16 17 18 19 20 21 22 1μF 44 43 42 VIN1PLC OUTPUT 41 REC. & CONT. 40 VIN2- VDD1 7 22μF 1μF STBY 3 5 0 to 20kΩ PVD1 MUTE 37 OUTPUT VCC BIASCAP 36 FB PGND1 VBIAS VREG5 GND PGND1 START SEQUENCE POWER LIMITER PGND2 PGND2 FB NC1 NC4 REC. & CONT. 26 OUTPUT NC7 NC8 NC9 25 FB PVD2 PVD2 OUT1- RL 0.1μF 0.1μF OUT133μH VD OUT2- 33μH OUT20.1μF BOOT20.22μF 0.1μF 0.47μF 28 27 NC6 0.47μF BOOT1- 32 29 NC5 0.1μF 33 30 VDD2 0.1μF 0.22μF 34 OUTPUT NC3 BOOT1+ 35 31 NC2 33μH OUT1+ 39 38 MUTECAP OUT1+ RL BOOT2+ OUT2+ 0.1μF 0.1μF OUT2+ 33μH 24 23 1μF + 470μF No.A1408-4/24 LV49152V Application Circuit Example 2 (RL = 6Ω) 470μF + 0-5V 1 2 0-5V 1μF VIN1+ 1μF 1μF VIN 2+ + 1μF 1μF 4 6 8 9 10 1μF 11 1μF PVD1 FB 12 1μF 13 14 15 16 17 18 19 20 21 22 1μF 44 43 42 VIN1PLC OUTPUT 41 REC. & CONT. 40 VIN2- VDD1 7 22μF 1μF STBY 3 5 0 to 20kΩ PVD1 MUTE 37 OUTPUT VCC BIASCAP 36 FB PGND1 VBIAS VREG5 GND PGND1 START SEQUENCE POWER LIMITER PGND2 PGND2 FB NC1 NC4 REC. & CONT. 26 OUTPUT NC7 NC8 NC9 25 FB PVD2 PVD2 OUT1- RL 0.1μF 0.15μF OUT122μH VD OUT2- 22μH OUT20.1μF BOOT20.22μF 0.15μF 0.68μF 28 27 NC6 0.68μF BOOT1- 32 29 NC5 0.15μF 33 30 VDD2 0.1μF 0.22μF 34 OUTPUT NC3 BOOT1+ 35 31 NC2 22μH OUT1+ 39 38 MUTECAP OUT1+ RL BOOT2+ OUT2+ 0.1μF 0.15μF OUT2+ 22μH 24 23 1μF + 470μF No.A1408-5/24 LV49152V Application Circuit Example 3 (RL = 4Ω) 470μF + 0-5V 1 2 0-5V 1μF VIN1+ 1μF 1μF VIN 2+ + 1μF 1μF 4 6 8 9 10 1μF 11 1μF PVD1 FB 12 1μF 13 14 15 16 17 18 19 20 21 22 1μF 44 43 42 VIN1PLC OUTPUT 41 REC. & CONT. 40 VIN2- VDD1 7 22μF 1μF STBY 3 5 0 to 20kΩ PVD1 MUTE 37 OUTPUT VCC BIASCAP 36 FB PGND1 VBIAS VREG5 GND PGND1 START SEQUENCE POWER LIMITER PGND2 PGND2 FB NC1 NC4 REC. & CONT. 26 OUTPUT NC7 NC8 NC9 25 FB PVD2 PVD2 OUT1- RL 0.1μF 0.22μF OUT115μH VD OUT2- 15μH OUT20.1μF BOOT20.22μF 0.22μF 1μF 28 27 NC6 1μF BOOT1- 32 29 NC5 0.22μF 33 30 VDD2 0.1μF 0.22μF 34 OUTPUT NC3 BOOT1+ 35 31 NC2 15μH OUT1+ 39 38 MUTECAP OUT1+ RL BOOT2+ OUT2+ 0.1μF 0.22μF OUT2+ 15μH 24 23 1μF + 470μF No.A1408-6/24 LV49152V Pin Equivalent Circuit Pin No. 1 Pin name MUTE I/O I Description Equivalent Circuit Mute control pin VD 250kΩ 1 10kΩ 100kΩ GND 2 STBY I Standby control pin VD 250kΩ 2 10kΩ 100kΩ GND 3 VIN1+ I Input pin, CH1 plus VD 3 300Ω 30kΩ VBIAS GND 4 VIN1- I Input pin, CH1 minus VD 4 300Ω 30kΩ VBIAS GND 5 PLC I Power level control pin VD 5 200Ω GND Continued on next page. No.A1408-7/24 LV49152V Continued from preceding page. Pin No. 6 Pin name VIN2- I/O I Description Equivalent Circuit Input pin, CH2 minus VD 300Ω 6 30kΩ VBIAS GND 7 VIN2+ I Input pin, CH2 plus VD 300Ω 7 30kΩ VBIAS GND 8 MUTECAP O Muteing sysytem capcitor connection VD VDD 20kΩ 10kΩ 8 GND 9 VCC O Internal power supply VD decupling capacitor connection 9 GND 10 BIASCAP O Internal regulator VD decupling capacitor connection 100kΩ 10 1kΩ 1kΩ 100kΩ GND Continued on next page. No.A1408-8/24 LV49152V Continued from preceding page. Pin No. 11 Pin name VBIAS I/O O Description Equivalent Circuit Internal regulator VD decupling capacitor connection 500Ω 11 500Ω GND 12 VREG5 O Internal regulator VD decupling capacitor connection 12 500Ω GND 13 GND Analog Ground 14 NC Non connection 15 NC Non connection 16 NC Non connection 17 NC Non connection 18 NC Non connection 19 NC Non connection 20 NC Non connection 21 NC Non connection 22 NC Non connection 23 PVD2 CH2 power supply 24 PVD2 25 OUT2+ CH2 power supply O Output pin, CH2 plus VD 25 GND 26 OUT2+ O Output pin, CH2 plus VD 26 GND Continued on next page. No.A1408-9/24 LV49152V Continued from preceding page. Pin No. Pin name BOOT2+ I/O 27 I/O Boot strap pin, CH2 plus Description 28 VDD2 O CH2 internal regulator decupling capacitor 29 BOOT2- I/O Boot strap pin, CH2 minus 30 OUT2- O Output pin, CH2 minus Equivalent Circuit connection VD 30 GND 31 OUT2- O Output pin, CH2 minus VD 31 GND 32 PGND2 CH2 Power Ground 33 PGND2 CH2 Power Ground 34 PGND1 CH1 Power Ground 35 PGND1 36 OUT1- CH1 Power Ground O Output pin, CH1 minus VD 36 GND 37 OUT1- O Output pin, CH1 minus VD 37 GND 38 BOOT1- I/O Boot strap pin, CH1 minus 39 VDD1 O CH1 internal regulator decupling capacitor 40 BOOT1+ I/O Boot strap pin, CH1 plus connection Continued on next page. No.A1408-10/24 LV49152V Continued from preceding page. Pin No. 41 Pin name OUT1+ I/O O Description Output pin, CH1 plus Equivalent Circuit VD 41 GND 42 OUT1+ O Output pin, CH1 plus VD 42 GND 43 PVD1 CH1 power supply 44 PVD1 CH1 power supply No.A1408-11/24 LV49152V Operation Mode Summary STBY mode (STBY = L and MUTE = L) Each bias becomes off state when the regulator in IC has been turned off. The most of circuits becomes off state. The supply current : 1μA (typical). MUTE mode (STBY = H and MUTE = L) Each bias becomes on state when the regulator in IC has been turned on. When more than half of the circuits are active, the amplifier in the output stages become off. The supply current : 20mA (typical). Operation mode (STBY = H and MUTE = H) The LV49152V operates as D-class amplifier. The output signal is synchronized with the input signal. The supply current : 45mA (typical) Function image No.A1408-12/24 LV49152V ON TIME/OFF TIME ON TIME Please secure ON TIME of 350msec or more for reducing Pop noise. Function image ON TIME • • • the time until the MUTE pin is set to high level after the STBY pin is set to high level OFF TIME Please secure OFF TIME of 1000msec or more for reducing Pop noise. Function image OFF TIME • • • the time until the STBY pin is set to low level after the MUTE pin is set to low level No.A1408-13/24 LV49152V SOFT MUTE The soft mute circuit is able to use fade in/fade out function, and can set Rise time and fall time by the time constant of the MUTECAP capacitor. FADE IN Mute rise time is Applpx.450msec in our recommended external components. 5V/DIV. MUTE pin MUTECAP pin [OUT+] vs [OUT-] Mute rise time Function image FADE OUT Mute fall time is Applpx.450msec in our recommended external components. 5V/DIV. MUTE pin MUTECAP pin [OUT+] vs [OUT-] Mute fall time Function image No.A1408-14/24 LV49152V Power supply lowering protection circuit Since the instable operation in the low voltage is prevented by using this circuit, after the voltage of the PVD pin is monitored and the voltage below the Attack voltage (PVD = 8V typ.), AMP is turned off. Also, to prevent the instable operation when the voltage of the PVD pin is decreased by any cause during operations, the Attack voltage (PVD = 7V typ.) is set. The voltage of Attack and Recover has hysteresis (About 1V) to prevent ON/OFF continuous action of the power supply lowering protection circuit. Function image Also, this IC is designed to turn off AMP in the same sequence that the MUTE is on as a pop noise measures when the plug of products are put off. Over current protection circuit The over current protection circuit is a protection circuit * to protect the output DMOS from the over current and corresponds to any mode of the power supply, GND and a load short. The protection operation is performed when the current reaches the detection current value set out in IC and the output DMOS is compulsorily turned off for about 20μsec. After compulsorily tuning off the output DMOS, when the Amplifier is automatically reset in usual operation and the over current flows continuously, the protection operation is performed again. Function image * The over current protection circuit is a function to avoid the abnormal state like the output short-circuit temporarily. Unfortunately, we cannot guarantee that IC is not destroyed. No.A1408-15/24 LV49152V Thermal protection circuit The LV49152V includes a thermal protection circuit to prevent damage to or destruction of the IC should abnormal internal heat generation occur. This means that should the IC junction temperature (Tj) rise above about 175°C due to inadequate heat dissipation or other reason, the thermal protection circuit will operate to stop IC operation should the temperature rise further. If the temperature is reduced by lowering the input level or other means, the thermal protection circuit will recover automatically (about 105°C). Recovery Attack Hystsrisis Temperature (Tj) rise Internal TSD DET. Shut down PWM Internal TSD DET. Temperature (Tj) fall Shut down PWM 40 50 60 70 80 90 100 110 110 130 110 150 160 170 180 190 200 Junction temperature Tj [°C] Function image * The thermal protection circuit is a function to avoid the abnormal state temporarily. Unfortunately, we cannot guarantee that IC is not destroyed. No.A1408-16/24 LV49152V PLC The PLC (power level control) function is able to control the maximum index modulation by setting a value of external PLC resistance R1 voluntarily, and prevent a PWM signal from becoming the over modulation mode. In addition, this circuit can be use as output power limit circuit because the PLC function can set the maximum index modulation voluntarily, and variable from 2W to 15W with output power linearly in the state that made the power supply voltage and load resistance fixation. Because the PLC function can set the suitable rated output with the same power supply voltage/speaker regardless of screen size in flat screen televisions by this, set can plan the commonization of the board. Furthermore, The PLC function can reduce abnormal noise in the hard clip so that output wave pattern becomes the soft clip when it limited output power. MAX. Power Half Power Min. Power PLC R1 5 LV49152V 1μF GND 13 Function image Measuring condition VD = 15V, RL = 8Ω, L = 33μH (TOKO : A7502BY-330M), C = 0.1uF,CL = 0.47μF,Ta = 25°C R1 -- PO@THD + N = 10% 18 R1 [kΩ] Po@10% [W] 3.0 0.694 3.6 1.073 4.7 1.982 6.2 3.642 10 7.5 5.562 8 8.2 6.855 9.1 8.591 10 10.64 VD = 15V RL = 8Ω fin = 1kHz THD + N = 10% 2ch-Drive AES17 PO@THD + N = 10% – W 16 14 12 6 4 13 15.32 2 15 15.94 0 20 16.01 0 2 4 6 8 10 12 14 16 18 20 R1 – kΩ Setting example of the output power limit value * When it is used this function as output power limit, please use the high-precision resistance such as the metal film resistor when precision of the electricity value is necessary. * The value of external PLC resistance R1 please connects more than 3kΩ. * When it is changed a value of external PLC resistance R1, please turn off an amplifier. No.A1408-17/24 LV49152V Cut-off frequency calculation method and the output LC filter setting L OUT+ C CL RL C L OUT- The cut off frequency fc of the output LC filter is calculated by the following formula. fc = 1 2π√2LCL Also, by setting the cut off frequency fc, the value of CL and L is calculated by using the following formula. 1 CL = 2√2 × π RLfc L= √2 × RL 4π fc In general, the value from 20% to 30% of CL is set to C. In case of fc = 30kHz RL [Ω] L [μH] CL [μF] C [μF] Q 4 15 1 0.22 0.650 6 22 0.68 0.15 0.636 8 33 0.47 0.1 0.704 16 68 0.22 0.047 0.739 Above formula is common calculation method and is a measure of constant setting. In fact, it is necessary to set with each set that considers the speaker characteristics. In addition, please set the fixed number to become Q ≤ 1 in currents in the fc neighborhood increasing if Q value of the LC filter is big. No.A1408-18/24 LV49152V Glaph deta L = 33μH (TOKO : A7502BY-330M), C = 0.1μF, CL = 0.47μF Ist -- VD 0.15 RL = 8Ω Rg = 0 STBY = L MUTE = L Standby current, Ist – μA Standby current, Ist – μA 0.15 0.1 0.05 0 0 2 4 6 8 10 12 14 16 Ist -- Ta VD = 15V RL = 8Ω Rg = 0 STBY = L MUTE = L 0.1 0.05 0 – 50 18 Externally applied voltage, VD – V Imute -- VD 20 15 10 5 0 0 2 4 6 8 10 12 14 16 15 10 5 VD = 15V RL = 8Ω Rg = 0 STBY = H MUTE = L 0 – 50 18 ICC -- VD Quiescent current, ICC – mA Quiescent current, ICC – mA 20 10 0 2 4 6 8 10 12 14 16 30 20 10 VD = 15V RL = 8Ω Rg = 0 STBY = H MUTE = H 0 – 50 18 0 50 100 Ambient temperature, Ta – °C VCC -- VD 20 RL = 8Ω Rg = 0 15 VCC -- Ta VD = 15V RL = 8Ω Rg = 0 15 VCC – V VCC – V 100 40 Externally applied voltage, VD – V 20 50 ICC -- Ta 50 30 0 0 Ambient temperature, Ta – °C RL = 8Ω Rg = 0 STBY = H MUTE = H 40 100 20 Externally applied voltage, VD – V 50 50 Imute -- Ta 25 RL = 8Ω Rg = 0 STBY = H MUTE = L Muting current, Imute – mA Muting current, Imute – mA 25 0 Ambient temperature, Ta – °C 10 5 10 5 0 0 2 4 6 8 10 12 14 Externally applied voltage, VD – V 16 18 0 – 50 0 50 100 Ambient temperature, Ta – °C No.A1408-19/24 LV49152V BIASCAP -- VD 10 10 RL = 8Ω Rg = 0 8 BIASCAP – V BIASCAP – V 8 6 4 2 BIASCAP -- Ta VD = 15V RL = 8Ω Rg = 0 6 4 2 0 0 2 4 6 8 10 12 14 16 0 – 50 18 Externally applied voltage, VD – V VBIAS -- VD 10 10 RL = 8Ω Rg = 0 8 VBIAS – V VBIAS – V 8 6 4 0 0 100 VBIAS -- Ta VD = 15V RL = 8Ω Rg = 0 6 4 2 4 6 8 10 12 14 16 0 – 50 18 Externally applied voltage, VD – V 5 4 4 VREG5 – V 5 3 3 2 2 1 1 4 6 8 10 12 14 16 VD = 15V RL = 8Ω Rg = 0 0 – 50 0 2 18 Externally applied voltage, VD – V 6 RL = 8Ω Rg = 0 5 4 4 VDD – V 5 3 2 1 1 0 2 4 6 8 10 12 14 Externally applied voltage, VD – V 100 50 16 18 VDD -- Ta VD = 15V RL = 8Ω Rg = 0 3 2 0 0 Ambient temperature, Ta – °C VDD -- VD 6 100 50 VREG5 -- Ta 6 RL = 8Ω Rg = 0 0 0 Ambient temperature, Ta – °C VREG5 -- VD 6 VREG5 – V 50 2 2 VDD – V 0 Ambient temperature, Ta – °C 0 – 50 0 100 50 Ambient temperature, Ta – °C No.A1408-20/24 LV49152V VG -- VD 32 32 RL = 8Ω fin = 1kHz VO = 0dBm 31 Gain, VG – dB Gain, VG – dB 31 30 29 VG -- Ta VD = 15V RL = 8Ω fin = 1kHz VO = 0dBm 30 29 28 9 12 15 28 – 50 18 Externally applied voltage, VD – V THD+N -- VD 5 3 2 CH2 0.1 7 CH1 5 3 2 0.01 7 5 RL = 8Ω fin = 1kHz PO = 1W 2ch-Drive AES17 3 2 0.001 12 9 15 3 2 CH2 0.1 7 CH1 5 3 2 0.01 7 5 3 2 VD = 15V RL = 8Ω fin = 1kHz PO = 1W 2ch-Drive AES17 0.01 – 50 18 CHsep. -- VD – 50 Channel separation, CHsep. – dB Channel separation, CHsep. – dB 0 – 60 – 70 CH1→CH2 CHsep. -- Ta – 60 – 70 CH1→CH2 CH2→CH1 – 80 – 50 – 80 15 18 Externally applied voltage, VD – V Ripple rejection ratio, SVRR – dB Ripple rejection ratio, SVRR – dB 0 RL = 8Ω fin = 100Hz Rg = 0 VDr = 0dBm DIN AUDIO – 20 – 40 CH1 – 60 CH2 – 80 9 12 15 Externally applied voltage, VD – V 0 100 50 Ambient temperature, Ta – °C SVRR -- VD 0 100 VD = 15V RL = 8Ω Rg = 0 VO = 0dBm DIN AUDIO CH2→CH1 12 50 Ambient temperature, Ta – °C RL = 8Ω fin = 1kHz Rg = 0 VO = 0dBm DIN AUDIO 9 100 5 Externally applied voltage, VD – V – 50 50 THD+N -- Ta 1 7 Total harmonic distortion, THD+N – % Total harmonic distortion, THD+N – % 1 7 0 Ambient temperature, Ta – °C 18 – 20 SVRR -- Ta VD = 15V RL = 8Ω Rg = 0 VDr = 0dBm DIN AUDIO – 40 CH1 – 60 CH2 – 80 – 50 0 100 50 Ambient temperature, Ta – °C No.A1408-21/24 LV49152V VNO -- VD 1 Noise, VNO – mVrms 5 7 5 Noise, VNO – mVrms 7 VNO -- Ta 1 RL = 8Ω Rg = 0 A-weight 3 2 0.1 CH2 CH1 7 5 3 3 VD = 15V RL = 8Ω Rg = 0 Rplc = 20kΩ A-weight 2 0.1 CH2 7 CH1 5 3 2 2 0.01 9 12 15 0.01 – 50 18 0 Externally applied voltage, VD – V fO -- VD 450 RL = 8Ω Rg = 0 Oscillating frequency, fO – kHz Oscillating frequency, fO – kHz 450 400 CH1 350 CH2 300 12 9 15 fO -- Ta 400 CH1 350 CH2 300 – 50 18 0 40 DUTY – % DUTY – % CH2 CH1 50 CH1 40 30 30 20 20 10 10 9 12 18 15 VD = 15V RL = 8Ω Rg = 0 0 – 50 0 0 Externally applied voltage, VD – V fin = 1kHz THD+N = 10% 2ch-Drive AES17 28 100 7 5 3 2 Ω RL =4 Ω RL 24 =6 RL 20 Output power, PO – W 32 100 50 Ambient temperature, Ta – °C PO -- VD 36 Output power, PO – W 100 DUTY -- Ta 60 CH2 50 50 Ambient temperature, Ta – °C DUTY -- VD RL = 8Ω Rg = 0 100 VD = 15V RL = 8Ω Rg = 0 Externally applied voltage, VD – V 60 50 Ambient temperature, Ta – °C Ω =8 16 12 8 4 0 10 7 5 3 2 PO -- VIN VD = 15V fin = 1kHz 2ch-Drive AES17 RL = 4Ω RL 1 7 5 3 2 = 8Ω 0.1 7 5 3 2 0.01 9 12 15 Externally applied voltage, VD – V 18 10 2 3 5 7 100 2 3 5 7 1000 Input voltage, VIN – mVp No.A1408-22/24 10 7 5 3 2 THD+N -- PO VD = 15V RL = 8Ω 2ch-Drive AES17 1 7 5 Total harmonic distortion, THD+N – % Total harmonic distortion, THD+N – % LV49152V Hz 7k fin 3 2 .6 =6 Hz 0.1 7 5 fin 3 2 k =1 fin = z 100H 0.01 0.001 2 3 5 70.01 2 3 5 7 0.1 2 3 5 7 1 10 7 5 3 2 1 7 5 3 2 THD+N -- f VD = 15V RL = 8Ω PO = 1W 2ch-Drive AES17 0.1 7 5 3 2 CH1 CH2 0.01 7 5 3 2 0.001 2 3 5 7 10 2 3 5 7100 10 2 3 5 7 100 10 7 5 3 2 THD+N -- PO VD = 15V RL = 6Ω 2ch-Drive AES17 z kH 1 7 5 fin 7 6.6 = 3 2 fin = 0.1 7 5 3 2 L = 22μH C = 0.15μF CL = 0.68μF z 1kH z 100H fin = 0.01 0.001 2 3 5 70.01 2 3 5 7 0.1 2 3 5 7 1 10 7 5 3 2 1 7 5 3 2 2 0.01 7 5 3 2 2 3 5 7100 Hz = k .67 6 3 2 Hz 1k fin = 0.1 7 5 3 2 L = 15μH C = 0.22μF CL = 1μF fin = 0.01 0.001 2 3 5 70.01 2 3 5 70.1 2 3 5 7 1 5 7100k CH1 CH2 L = 22μH C = 0.15μF CL = 0.68μF 2 3 5 7 100 Hz 100 10 7 5 3 2 2 3 5 7 1k 2 3 5 7 10k 2 3 5 7100k 1 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 0.001 2 3 5 7 10 2 3 5 7100 THD+N -- f VD = 15V RL = 4Ω PO = 1W 2ch-Drive AES17 CH1 CH2 L = 15μH C = 0.22μF CL = 1μF 10 2 3 5 7 100 Output power, PO – W 10 2 3 THD+N -- f 10 THD+N -- PO fin 5 7 10k Frequency, f – Hz VD = 15V RL = 4Ω 2ch-Drive AES17 1 7 5 2 3 0.1 7 5 3 2 0.001 2 3 5 7 10 Total harmonic distortion, THD+N – % Total harmonic distortion, THD+N – % 3 5 7 1k VD = 15V RL = 6Ω PO = 1W 2ch-Drive AES17 Output power, PO – W 10 7 5 2 3 Frequency, f – Hz Total harmonic distortion, THD+N – % Total harmonic distortion, THD+N – % Output power, PO – W 2 3 5 7 1k 2 3 5 7 10k 2 3 5 7100k 2 3 5 7100k Frequency, f – Hz Response -- f Phase -- f 20 VD = 15V RL = 8Ω PO = 1W 0 Phase – deg Response – dB 0 – 10 – 20 – 40 – 20 – 60 – 30 10 – 80 2 3 5 7100 2 3 5 7 1k 2 3 5 710k 2 3 5 7100k 2 3 5 71000k Frequency, f – Hz VD = 15V RL = 8Ω PO = 1W 10 2 3 5 7 100 2 3 5 7 1k 2 3 5 7 10k Frequency, f – Hz No.A1408-23/24 LV49152V CHsep. -- f 5 – 70 CH1→CH2 CH2→CH1 2 CH2 0.1 CH1 7 5 3 0.01 10 2 3 5 7 100 2 3 5 7 1k 2 3 5 7 10k 2 3 5 7100k 1 2 3 5 7 10 2 3 5 7100 2 3 5 7 1k 2 3 5 710k 2 3 5 7100k Frequency, f – Hz Rg – Ω SVRR -- fr Efficiency -- PO 100 VD = 15V RL = 8Ω Rg = 0 Vr = 0dBm DIN AUDIO RL = 8Ω RL = 4Ω 80 Efficiency – % Ripple rejection ratio, SVRR – dB 3 2 – 80 – 20 VD = 15V RL = 8Ω A-weight 7 – 60 0 VNO -- Rg 1 VD = 15V RL = 8Ω Rg = 0 VO = 0dBm DIN AUDIO Noise, VNO – mVrms Channel separation, CHsep. – dB – 50 – 40 60 40 CH1 – 60 VD = 15V fin = 1kHz 2ch-Drive AES17 20 CH2 – 80 10 0.001 2 3 5 7 100 2 3 5 7 1k 2 3 5 7 10k Ripple Frequency, fr – Hz 2 3 5 7100k 0 2 4 6 8 10 12 14 16 18 20 Output power, PO – W SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of Nobember, 2009. Specifications and information herein are subject to change without notice. PS No.A1408-24/24