Analog Power AM2322N N-Channel 30-V (D-S) MOSFET These miniature surface mount MOSFETs utilize a high cell density trench process to provide low rDS(on) and to ensure minimal power loss and heat dissipation. Typical applications are DC-DC converters and power management in portable and battery-powered products such as computers, printers, PCMCIA cards, cellular and cordless telephones. • Low rDS(on) provides higher efficiency and extends battery life • Low thermal impedance copper leadframe SOT-23 saves board space • Fast switching speed • High performance trench technology PRODUCT SUMMARY VDS (V) rDS(on) (Ω) 0.085 @ VGS = 10V 30 0.125 @ VGS = 4.5V ID (A) 2.5 1.7 G D S ABSOLUTE MAXIMUM RATINGS (TA = 25 oC UNLESS OTHERWISE NOTED) Symbol Maximum Units Parameter 30 VDS Drain-Source Voltage V VGS ±20 Gate-Source Voltage TA=25oC Continuous Drain Currenta Pulsed Drain Current o TA=70 C b 2.5 ID IDM a 10 IS Continuous Source Current (Diode Conduction) TA=25 C o TA=70 C 1.25 PD Operating Junction and Storage Temperature Range A 0.46 o Power Dissipationa A 2 W 0.8 TJ, Tstg o C -55 to 150 THERMAL RESISTANCE RATINGS Parameter a Maximum Junction-to-Ambient Symbol t <= 5 sec Steady-State RTHJA Maximum 150 200 Units o C/W Notes a. Surface Mounted on 1” x 1” FR4 Board. b. Pulse width limited by maximum junction temperature 1 PRELIMINARY Publication Order Number: DS-AM2322_F Analog Power AM2322N SPECIFICATIONS (TA = 25oC UNLESS OTHERWISE NOTED) Parameter Symbol Test Conditions VGS(th) IGSS VDS = VGS, ID = 250 uA Limits Unit Min Typ Max Static Gate-Threshold Voltage Gate-Body Leakage Zero Gate Voltage Drain Current On-State Drain Current A IDSS ID(on) A Drain-Source On-Resistance A Forward Tranconductance Diode Forward Voltage rDS(on) gfs VSD 1.0 VDS = 0 V, VGS = 8 V VDS = 16 V, VGS = 0 V 1.5 4 7 100 62 102 85 125 o VDS = 20 V, VGS = 0 V, TJ = 55 C VDS = 5 V, VGS = 4.5 V VGS = 10 V, ID = 2.5 A VGS = 4.5 V, ID = 1.7 A VDS = 5 V, ID = 3.0 A IS = 0.46 A, VGS = 0 V 3 1 10 6 V nA uA A 3.5 0.65 mΩ S V Dynamicb Total Gate Charge Gate-Source Charge Gate-Drain Charge Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-On Delay Time Rise Time Turn-Off Delay Time Fall-Time Qg Qgs Qgd Ciss Coss Crss td(on) tr td(off) tf VDS = 10 V, VGS = 4.5 V, ID = 2.5 A VDS = 15 V, VGS = 0 V, f = 1MHz VDD = 10 V, ID = 1 A , RG = 6 Ω, VGEN = 4.5 V 3.5 0.8 1.0 720 165 60 10 13 14 4 7 2 2 1500 400 200 20 30 30 20 nC pF ns Notes a. Pulse test: PW <= 300us duty cycle <= 2%. b. Guaranteed by design, not subject to production testing. Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typical” must be validated for each customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer. 2 PRELIMINARY Publication Order Number: DS-AM2322_F Analog Power AM2322N Typical Electrical Characteristics Figure 2. On-Resistance Variation with Drain Current and Gate Voltage Figure 1. On-Region Characteristics Figure 3. On-Resistance Variation Figure 4. On-Resistance Variation with with Temperature Drain Current and Temperature Figure 6. Gate Threshold Variation with Figure 5. Transfer Characteristics Temperature 3 PRELIMINARY Publication Order Number: DS-AM2322_F Analog Power AM2322N Typical Electrical Characteristics Figure 7. Gate Charge Characteristic Figure 8. Capacitance Characteristic Figure 10. Breakdown Voltage Variation Figure 9. Maximum Safe Operating Area with Temperature Normalized Thermal Transient Impedance, Junction to Ambient 4 PRELIMINARY Publication Order Number: DS-AM2322_F Analog Power AM2322N Package Information 5 PRELIMINARY Publication Order Number: DS-AM2322_F