CPH5504 Ordering number : EN6793B SANYO Semiconductors DATA SHEET CPH5504 NPN Epitaxial Planar Silicon Transistor High-Current Switching Applications Applications • DC-DC converter, relay drivers, lamp drivers, motor drivers, flash Features • • • Composite type with 2 NPN transistors in one package facilitating high-density mounting The CPH5504 is composed of 2 chips each equivaient to the CPH3205 Ultrasmall package facilitates miniaturization in end products. (mounting height : 0.9mm) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Conditions Ratings Unit VCBO VCES Collector-to-Emitter Voltage Collector-to-Emitter Voltage VCEO VEBO IC Emitter-to-Base Voltage Collector Current Collector Current (Pulse) ICP IB PC Base Current Collector Dissipation Total Power Dissipation 100 V 100 V 50 V 6 V 3 A 6 Junction Temperature PT Tj Storage Temperature Tstg mA Mounted on a ceramic board (600mm2×0.8mm) 0.9 W Mounted on a ceramic board (600mm2×0.8mm) 1.2 W 150 °C --55 to +150 °C Product & Package Information unit : mm (typ) 7017A-009 • Package : CPH5 • JEITA, JEDEC : SC-74A, SOT-25 • Minimum Packing Quantity : 3,000 pcs./reel 5 4 CPH5504-TL-E 0.15 Packing Type : TL Marking 3 LOT No. ED 0.05 1.6 2.8 0.2 0.6 Package Dimensions 2.9 A 600 0.9 0.2 0.6 TL 1 2 0.95 0.4 1 : Collector 2 : Collector 3 : Base 4 : Emitter Common 5 : Base Electrical Connection 5 4 3 SANYO : CPH5 1 2 http://semicon.sanyo.com/en/network 62712 TKIM/62005EA MSIM TB-00001409/21401 TSIM TA-2946 No. 6793-1/7 CPH5504 Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current Emitter Cutoff Current DC Current Gain ICBO IEBO VCB=40V, IE=0A VEB=4V, IC=0A hFE1 VCE=2V, IC=100mA VCE=2V, IC=3A hFE2 Gain-Bandwidth Product fT Cob Output Capacitance VCE(sat) Base-to-Emitter Saturation Voltage VBE(sat) V(BR)CBO Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time Fall Time Ratings min typ Unit max 200 1 μA 1 μA 560 70 VCE=10V, IC=500mA Collector-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Conditions 380 MHz VCB=10V, f=1MHz IC=1A, IB=50mA 13 80 120 mV pF IC=2A, IB=100mA IC=2A, IB=100mA 140 210 mV 0.88 1.2 V IC=10μA, IE=0A 100 V V(BR)CES V(BR)CEO IC=100μA,RBE=0Ω 100 V IC=1mA, RBE=∞ 50 V V(BR)EBO ton IE=10μA, IC=0A 6 tstg tf See specified Test Circuit. V 35 ns 300 ns 22 ns Switching Time Test Circuit IB1 PW=20μs D.C.≤1% IB2 OUTPUT INPUT RB VR 50Ω RL + + 100μF 470μF VBE= --5V VCC=25V 10IB1= --10IB2=IC=1A Ordering Information Device CPH5504-TL-E Package Shipping memo CPH5 3,000pcs./reel Pb Free No. 6793-2/7 CPH5504 IC -- VCE Collector Current, IC -- A VCE=2V 80mA A 4.0 60mA 3.5 40mA 2.5 3.0 2.5 20mA 2.0 10mA 1.5 5.0mA 2.0 Ta=75°C 25°C --25°C 100m 4.5 IC -- VBE 3.0 Collector Current, IC -- A 5.0 1.5 1.0 1.0 0.5 0.5 IB=0mA 0 0 0.4 0.8 1.2 1.6 0 Collector-to-Emitter Voltage, VCE -- V Gain Bandwidth Product, f T -- MHz DC Current Gain, hFE Ta=75°C 3 --25°C 25°C 100 7 5 3 2 10 0.01 2 3 5 7 2 0.1 3 5 7 2 1.0 Collector Current, IC -- A 0.8 1.0 IT02465 VCE=10V 7 5 3 2 100 7 5 3 2 0.01 3 2 3 5 7 0.1 2 3 5 7 1.0 2 Collector Current, IC -- A IT02466 Cob -- VCB 100 0.6 f T -- IC 1000 5 2 0.4 Base-to-Emitter Voltage, VBE -- V VCE=2V 7 0.2 IT02464 hFE -- IC 1000 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 2 10 7 5 5 IC / IB=20 7 5 3 IT02467 VCE(sat) -- IC 1000 f=1MHz 7 Output Capacitance, Cob -- pF 0 2.0 5 3 2 100 °C 75 = Ta 7 5 °C 25 °C 25 -- 3 2 3 2 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 Collector-to-Base Voltage, VCB -- V Base-to-Emitter Saturation Voltage, VBE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 2 Ta 7 5 5 =7 °C °C 25 --25 3 °C 2 2 3 5 7 0.1 2 3 5 7 1.0 Collector Current, IC -- A 5 2 3 5 IT02470 7 0.1 2 3 5 7 1.0 2 3 5 IT02469 VBE(sat) -- IC 5 5 100 3 Collector Current, IC -- A IC / IB=50 7 2 IT02468 VCE(sat) -- IC 1000 10 0.01 10 0.01 5 7 IC / IB=50 3 2 1000 Ta= --25°C 7 75°C 5 25°C 3 2 100 0.01 2 3 5 7 0.1 2 3 5 7 1.0 Collector Current, IC -- A 2 3 5 IT02471 No. 6793-3/7 CPH5504 ASO 1m s op s ati on 0.1 7 5 Ta=25°C Single pulse Mounted on a ceramic board (600mm2×0.8mm) 1unit 3 2 0.01 0.1 2 3 5 7 1.0 2 3 5 7 10 2 Collector-to-Emitter Voltage, VCE -- V 3 1.0 To t 0.9 al 0.8 1u nit Di ss ip ati on 0.6 0.4 0.2 Mounted on a ceramic board (600mm2×0.8mm) 0 5 7 IT02472 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT02473 PC(TR2) -- PC(TR1) 1.0 Collector Dissipation, PC(TR2) -- W s 0m er 3 2 ms s 0μ DC 10 50 10 1.0 7 5 1.2 Collector Dissipation, PC -- W IC=3A 3 2 PC -- Ta 1.4 ICP=6A 0μ 10 Collector Current, IC -- A 10 7 5 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 Mounted on a ceramic board (600mm2×0.8mm) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Collector Dissipation, PC(TR1) -- W 0.9 1.0 IT02474 No. 6793-4/7 CPH5504 Embossed Taping Specification CPH5504-TL-E No. 6793-5/7 CPH5504 Outline Drawing CPH5504-TL-E Land Pattern Example Mass (g) Unit 0.02 mm * For reference Unit: mm 2.4 1.4 0.6 0.95 0.95 No. 6793-6/7 CPH5504 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of June, 2012. Specifications and information herein are subject to change without notice. PS No. 6793-7/7