DF6A6.8FUT1 Quad Array for ESD Protection This quad voltage suppressor is designed for applications requiring transient overvoltage protection capability. It is intended for use in voltage and ESD sensitive equipment such as computers, printers, business machines, communication systems, medical equipment, and other applications. Its quad junction common anode design protects four separate lines using only one package. These devices are ideal for situations where board space is at a premium. Specification Features • • • • • SC–88 Package Allows Four Separate Unidirectional Configurations Low Leakage < 1 A @ 5 Volt Breakdown Voltage: 6.4 – 7.2 Volt @ 5 mA Low Capacitance (40 pF typical) ESD Protection Meeting 61000–4–2 Level 4 and 16 kV Human Body Model http://onsemi.com 1 6 2 5 3 4 MARKING DIAGRAM Mechanical Characteristics • • • • 6 Void Free, Transfer–Molded, Thermosetting Plastic Case Corrosion Resistant Finish, Easily Solderable Package Designed for Optimal Automated Board Assembly Small Package Size for High Density Applications SC–88 CASE 419B PLASTIC Rating Symbol Value Unit Peak Power Dissipation @ 8 x 20 s (Note 1) Ppk 75 Watts Steady State Power Dissipation (Note 2) PD 68d 1 2 3 ORDERING INFORMATION Thermal Resistance – Junction to Ambient Derate Above 25°C RJA Maximum Junction Temperature Operating Junction and Storage Temperature Range Lead Solder Temperature (10 seconds duration) 4 68 = Device Marking d = One Digit Date Code = Pin 1 Indicator MAXIMUM RATINGS (TA = 25°C unless otherwise noted) ESD Discharge MIL STD 883C – Method 3015–6 IEC61000–4–2, Air Discharge IEC61000–4–2, Contact Discharge 5 385 mW Device DF6A6.8FUT1 328 3.0 °C/W mW/°C TJmax 150 °C TJ, Tstg –55 to +150 °C VPP Package Shipping SC–88 3000/Tape & Reel kV 16 16 8 TL °C 260 1. Per Waveform Figure 1 2. Mounted on FR–5 Board = 1.0 X 0.75 X 0.062 in. Semiconductor Components Industries, LLC, 2001 May, 2001 – Rev. 0 1 Publication Order Number: DF6A6.8FUT1/D DF6A6.8FUT1 I IF VBR VRWM V IR VF IT V–I Curve ELECTRICAL CHARACTERISTICS Breakdown Voltage VBR @ 5 mA (Volts) Leakage Current IRM @ VRWM = 5 V Typical Capacitance @ 0 V Bias Max VF @ IF = 10 mA Max ZZ @ 5 mA Max ZZK @ 0.5 mA Device Device Marking Min Nom Max (A) (pF) (V) () () DF6A6.8FUT1 68 6.4 6.8 7.2 1.0 40 1.25 30 300 tr 90 50 PEAK VALUE IRSM @ 8 s TYPICAL CAPACITANCE (pF) 1 MHz FREQUENCY % OF PEAK PULSE CURRENT 100 PULSE WIDTH (tP) IS DEFINED AS THAT POINT WHERE THE PEAK CURRENT DECAY = 8 s 80 70 60 HALF VALUE IRSM/2 @ 20 s 50 40 30 tP 20 10 0 40 35 30 25 20 15 10 0 20 40 60 80 0 3 2 4 BIAS VOLTAGE (VOLTS) Figure 1. 8 × 20 s Pulse Waveform Figure 2. Capacitance Ipp , PEAK PULSE CURRENT (AMPS) 0.1 0.01 0.001 0.0001 0.6 1 t, TIME (s) 1 IF, FORWARD CURRENT (A) 45 0.7 0.8 0.9 1.0 1.1 5 10 8 x 20 s per Figure 1 1 1.2 8 9 10 11 VF, FORWARD VOLTAGE (VOLTS) VC, CLAMPING VOLTAGE (VOLTS) Figure 3. Forward Voltage Figure 4. Clamping Voltage versus Peak Pulse Current http://onsemi.com 2 12 DF6A6.8FUT1 PACKAGE DIMENSIONS SC–88 (SOT–363) CASE 419B–01 ISSUE G A G V 6 5 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 4 –B– S 1 2 DIM A B C D G H J K N S V 3 D 6 PL 0.2 (0.008) M B M N J C K H ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ 1.9 mm http://onsemi.com 3 0.65 mm 0.65 mm 0.4 mm (min) 0.5 mm (min) INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC --0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 0.012 0.016 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC --0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20 0.30 0.40 DF6A6.8FUT1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada Email: [email protected] Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada N. American Technical Support: 800–282–9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor – European Support German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET) Email: ONlit–[email protected] French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET) Email: ONlit–[email protected] English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT) Email: [email protected] CENTRAL/SOUTH AMERICA: Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST) Email: ONlit–[email protected] Toll–Free from Mexico: Dial 01–800–288–2872 for Access – then Dial 866–297–9322 ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support Phone: 1–303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001–800–4422–3781 Email: ONlit–[email protected] JAPAN: ON Semiconductor, Japan Customer Focus Center 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031 Phone: 81–3–5740–2700 Email: [email protected] ON Semiconductor Website: http://onsemi.com EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781 *Available from Germany, France, Italy, UK, Ireland For additional information, please contact your local Sales Representative. http://onsemi.com 4 DF6A6.8FUT1/D