CLARE CPC1510G

CPC1510
1-Form-A Solid State Relay with
Integrated Current Limit
Parameter
Blocking Voltage
Rating
250
Units
VP
Load Current
200
Max RON
15
mA
Ω
Description
The CPC1510 is a 1-Form-A normally open Solid
State Relay with an integrated current limit feature
that can replace electromechanical relays while
enhancing the robustness of wireline-interface
applications.
Features
•
•
•
•
•
•
•
•
•
Integrated Active Current-Limit Protection
Thermal Shutdown
Linear AC or DC Operation
Low Power Consumption
Clean, Bounce-free Switching
High Surge Capability
Low Power Drive Requirements
Surface Mount version available
Tape & Reel packaging available
The relay is constructed using a GaAIAs LED for
actuation control and an integrated monolithic
die for the switch output. The die, fabricated in a
high-voltage dielectrically isolated technology, is
comprised of a photodiode array, switch control
with active current limiting circuitry, and MOSFET
switches. The active current limit circuitry in the
CPC1510 also provides a thermal shutdown feature
offering excellent power cross immunity for improved
survivability in harsh environments.
Applications
• General Telecom Switching
• Hook Switch
• Ringing Relay
• Dial Pulsing
• Ground Start
• Ground Fault Protection
• Instrumentation
• Automatic Tuning/Balancing
• Flying Capacitor
• Analog Multiplex
• Peripherals
• Automatic Tuning/Balancing
• Transducer Driver
• Security
• Medical Equipment
These enhancements greatly improves the
robustness of end systems using this device
compared to systems using relays without the
integrated current limit. In addition, the active
current limit circuitry enables the CPC1510 to pass
FCC 68.302 and other regulatory voltage surge
requirements when adequate overvoltage protection
is provided. The CPC1510 relay may be used
in both unidirectional DC applications as well as
bi-directional AC applications.
Approvals
• UL - File # E76270
Ordering Information
Part #
CPC1510G
Pin Configuration
+ Control
– Control
Do Not Use
CPC1510 Pinout
CPC1510 Pinout
AC/DC Configuration
DC Only Configuration
1
6
2
5
3
4
Load
+ Control
Do Not Use
– Control
Load
Do Not Use
1
6
2
5
3
4
Description
6 Pin 0.250" Wide, Through Hole (50/Tube)
CPC1510GS
6 Pin 0.250" Wide, Surface Mount (50/Tube)
CPC1510GSTR
6 Pin 0.250" Wide, Surface Mount (1000/Reel)
+ Load
Switching Characteristics of
Normally Open (Form A) Devices
– Load
10ms
CONTROL
+
90%
LOAD
10%+
10%+
TON
DS-CPC1510-R01
www.clare.com
TOFF
1
CPC1510
Absolute Maximum Ratings
Parameter
Blocking Voltage
Ratings
250
Units
VP
Reverse Input Voltage
5
V
Input Control Current
50
mA
1
A
Peak (10ms)
1
150
mW
Total Power Dissipation 2
800
mW
Isolation Voltage Input to Output
3750
Vrms
Operational Temperature
-40 to +85
°C
Storage Temperature
-40 to +125
°C
Input Power Dissipation
1
Derate Linearly 1.33 mW/˚C
2
Derate Linearly 1.67 mW/˚C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Electrical absolute maximum ratings are at 25°C
Electrical Characteristics
Parameter
Output Characteristics @ 25°C
Conditions
Symbol
IF=5mA, VL=±5V, t=5ms
ILMT
IF=5mA, IL=100mA
RON
VL=200V
ILEAK
Min
Typ
Max
Units
300
366
450
600
700
920
6
11
15
1.5
2.8
3.75
-
0.02
1
µA
2
ms
Current Limit
AC/DC Configuration
DC Configuration
mA
On-Resistance
AC/DC Configuration
DC Configuration
Off-State Leakage Current
Ω
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
IF=5mA, IL=100mA
TON
TOFF
IF=0mA, VL=1.0V
IF=0mA, VL=50V
-
0.30
0.16
CO
-
-
-
pF
IF
5
-
-
mA
Input Characteristics @ 25°C
Input Control Current
IL=100mA
Input Dropout Current
IL=100mA
IF
0.2
-
-
mA
LED Forward Voltage
Common Characteristics @ 25°C
IF=10mA
VF
1.15
1.29
1.45
V
-
CI/O
-
3
-
pF
Input to Output Capacitance
2
www.clare.com
R01
CPC1510
PERFORMANCE DATA*
35
25
20
15
10
5
25
20
15
10
1.17
1.19
1.21
1.23
20
15
10
5
0
0
1.25
8
10
9
LED Forward Voltage Drop (V)
11
12
0.75
13
1.05
CPC1510
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25ºC)
1.35
1.65
1.95
2.25
LED Current (mA)
On-Resistance (Ω)
25
CPC1510
Typical Turn-On Time
(N=50 Ambient Temperature = 25ºC)
(Load Current = 100mADC; IF = 5mADC)
25
CPC1510
Typical Turn-Off Time
(N=50 Ambient Temperature = 25ºC)
(Load Current = 100mADC; IF = 5mADC)
20
15
10
5
0
0.75
1.05
1.35
1.65
1.95
2.25
20
Device Count (N)
Device Count (N)
Device Count (N)
CPC1510
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25ºC)
(Load Current = 100mADC)
5
0
25
25
30
Device Count (N)
Device Count (N)
30
CPC1510
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25ºC)
(Load Current = 100mADC; IF = 5mADC)
Device Count (N)
35
CPC1510
Typical LED Forward Voltage Drop
(N=50 Ambient Temperature = 25ºC)
IF = 5mADC
15
10
5
0
0.23
LED Current (mA)
0.26
0.29
0.32
0.35
20
15
10
5
0
0.38
0.12
0.17
Turn-On (ms)
CPC1510
Typical Load Current vs. Temperature
(N=50 Anbient Temperature = 25ºC)
DC Configuration
IF = 10mA
IF = 5mA
AC/DC Configuration
300
IF = 10mA
IF = 5mA
200
100
0.025
0.020
0.015
0.010
0.005
-40
-20
0
20
40
60
80
100
0
120
0.25
0.20
IF = 5mA
0.10
0.05
-40
-20
0
20
40
60
Temperature (ºC)
80
100
LED Forward Voltage Drop (V)
Turn-Off (ms)
0.30
0
0.2
IF = 10mA
-20
0
20
40
60
80
-40 -20
0
20
100
40
60
80
100 120
Temperature (ºC)
Temperature (ºC)
CPC1510
Typical Turn-Off vs. Temperature
(Load Current = 100mADC)
0.15
0.3
0
-40
Temperature (ºC)
0.35
IF = 5mA
0.4
0.1
1.8
CPC1510
Typical Turn-On vs.LED Forward Current
(Load Current = 100mADC)
CPC1510
Typical LED Forward Voltage Drop
vs. Temperature
0.40
0.35
1.6
1.4
1.2
IF = 50mA
1.0
IF = 10mA
IF = 5mA
0.8
Turn-On (ms)
0
0.37
0.5
0.030
400
0.32
CPC1510
Typical Turn-On vs. Temperature
(Load Current = 100mADC)
0.6
Turn-On (ms)
500
0.27
Turn-Off (ms)
CPC1510
Typical Leakage vs. Temperature
(Measured across Pins 4 & 6)
0.035
Leakage (µA)
Load Current (mA)
600
0.22
0.30
0.25
0.20
0.15
0.10
0.05
0.00
-20
0
20
40
60
Temperature (ºC)
80
100
120
0
5
10
15
20
25
30
35
40
45
50
Forward Current (mA)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
R01
www.clare.com
3
CPC1510
PERFORMANCE DATA*
CPC1510
Typical On-Resistance vs. Temperature
(Load Current = Max rated at Temp.)
AC/DC Configuration
CPC1510
Typical Turn-Off vs. LED Forward Current
(Load Current = 100mADC)
0.12
25
0.08
0.06
0.04
0.02
0
3.0
5
10
15
20
25
30
35
40
45
IF = 10mA
10
5
-40
-20
0
20
40
60
80
Temperature (ºC)
CPC1510
Typical IF for Switch Operation
vs. Temperature
(Load Current = 100mADC)
CPC1510
Typical IF for Switch Dropout
vs. Temperature
(Load Current = 100mADC)
3.0
1.5
1.0
0.5
-20
0
20
40
60
Temperature (ºC)
80
100
1.5
1.0
-40
-20
0
20
40
60
Temperature (ºC)
3
IF = 10mA
2
1
150
2.0
0
4
-40
-20
0
20
40
60
80
100
Temperature (ºC)
0.5
-40
IF = 5mA
5
0
Load Current (mA)
2.0
6
100
2.5
LED Current (mA)
LED Current (mA)
15
LED Forward Current (mA)
2.5
0
20
0
50
IF = 5mA
On-Resistance (Ω)
On-Resistance (Ω)
Turn-Off (ms)
0.10
0
CPC1510
Typical On-Resistance vs. Temperature
(Load Current = Max rated at Temp.)
DC Configuration
80
100
CPC1510
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25ºC)
IF = 5mADC
100
50
0
-50
-100
-150
-2.5 -2.0 -1.5 -1.0 -0.5
0
0.5 1.0 1.5 2.0 2.5
Load Voltage (V)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
4
www.clare.com
R01
Manufacturing Information
Soldering
Recommended soldering processes are limited to
245ºC component body temperature for 10 seconds.
Washing
Clare does not recommend ultrasonic cleaning or the
use of chlorinated solvents.
MECHANICAL DIMENSIONS
6 Pin Through Hole (G)
3.302 ± 0.051
(0.130 ± 0.002)
7.239 TYP
(0.285 TYP)
0.254 TYP
(0.010 TYP)
2.540 ± 0.127
6-0.800 DIA. (0.100 ± 0.005)
(6-0.031 DIA.)
6.350 ± 0.127
(0.250 ± 0.005)
6 Pin Surface Mount (“GS” Suffix)
8.382 ± 0.381
(0.330 ± 0.015)
7.620 ± 0.254
(0.300 ± 0.010)
5.080 ± 0.127
(0.200 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
PC Board Pattern
(Top View)
2.540 ± 0.127
(0.100 ± 0.005)
9.525 ± 0.254
(0.375 ± 0.010)
4.445 ± 0.127
(0.175 ± 0.005)
0.254 ± 0.0127
(0.010 ± 0.0005)
7.620 ± 0.127
(0.300 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
9.144 ± 0.508
(0.360 ± 0.020)
3.302 ± 0.051
(0.130 ± 0.002)
PC Board Pattern
(Top View)
8.382 ± 0.381
(0.330 ± 0.015)
7.620 ± 0.254
(0.300 ± 0.010)
8.305 ± 0.127
(0.327 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
0.635 ± 0.127
(0.025 ± 0.005)
1.905 ± 0.127
(0.075 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
1.499 ± 0.127
(0.059 ± 0.005)
Tape and Reel Packaging for Surface Mount Package
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
W = 16.30 MAX
(0.642 MAX)
B0 = 10.10
(0.398)
Top Cover
Tape
Embossment Carrier
Embossment
K1 = 3.80
(0.150)
P = 12.00
(0.472)
K0 = 4.90
(0.193)
User Direction of Feed
A0 = 10.10
(0.398)
Dimensions
mm
(inches)
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions
at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever,
and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property
right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support
or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make
changes to its products at any time without notice.
5
Specification: DS-CPC1510-R01
©Copyright 2005, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
10/31/05