PHILIPS DC6M603X6-15A

DC6M4/5/6 series
6 MHz DC/DC
step-down converter
Small, highly efficient switching converters
with ultra-low output voltage ripple
Ideal for mobile and battery driven devices, the DC6M4/5/6 series combine the advantages of a high
frequency DC/DC buck converter with high performance and small package (1.0 mm * 1.4 mm). The
6 MHz switching frequency allows use of inductors as small as 470 nH to save board space. Another
key advantage is the ultra-low output voltage ripple performance of only 7 mV (typ).
Key features
`` Ultra-low output voltage ripple of 7 mV (typ)
`` Very small WLCSP6 package for board space reduction
`` Optimized for load range of 40 mA to 650 mA with an efficiency of up to 95%
`` Input voltage range 2.3 V - 5.5 V
`` Available with output currents of 425, 500, 650 mA
`` Low quiescent current of 0.2 µA (typ) in shutdown
`` Inrush, short circuit & temperature protection
`` Available with Auto/PWM mode select, output voltage `
select or power good/XSHUTDOWN option
Conversion efficiency
Ultra-low output voltage ripple performance
Key applications
`` Mobile phones
`` PC tablets
`` DSCs (Digital Still Cameras)
`` Video cameras
`` Game pads
`` Notebooks, Netbooks, and Ultrabooks
30
Vripple
(mVpp)
25
20
15
VIN = 4.2 V
VIN = 3.6 V
VIN = 3.0 V
10
5
0
0
100
200
300
400
500
600
IOUT (mA)
700
100
efficiency
(%)
80
60
DC6M601X6/285S
40
20
0
0
100
200
300
400
500
600
IOUT (mA)
700
NXPs new DC6M4/5/6 product series are an ideal solution for
mobile applications and battery driven devices.
Selection guide
VIN
(V)
Operation
frequency
(MHz)
Shutdown
current typ
(µA)
Output
voltage
ripple typ
(mV)
Efficiency
up to
(%)
IOUT
(mA)
425
500
2.3
5.5
6
0.2
7
95
650
Output
voltage
V*
DC6Mx01/xxxS
Modulation select
(Auto or forced PWM)
1.8
2.85
1.8 / 2.85
1.2
1.5
1.8
1.2 / 1.5
1.2 / 1.8
1.5 / 1.8
1.2
1.5
1.8
2.85
1.2 / 1.5
1.2 / 1.8
1.5 / 1.8
DC6M401X6/18S
DC6M401X6/285S
DC6M501X6/12S
DC6M501X6/15S
DC6M501X6/18S
DC6M601X6/12S
DC6M601X6/15S
DC6M601X6/18S
DC6M601X6/285S
-
DC6Mx02/xxxxxA
Voltage select
PWM/PFM Auto
Modulation
DC6M402X6/18285A
DC6M502X6/1215A
DC6M502X6/1218A
DC6M502X6/1518A
DC6M602X6/1215A
DC6M602X6/1218A
DC6M602X6/1518A
DC6Mx02/xxxxxF
Voltage select
Forced PWM
DC6M502X6/1215F
DC6M502X6/1218F
DC6M502X6/1518F
DC6M602X6/1215F
DC6M602X6/1218F
DC6M602X6/1518F
DC6Mx03/xxxA
XSHUTDOWN
PWM/PFM Auto
Modulation
DC6M503X6/12A
DC6M503X6/15A
DC6M503X6/18A
DC6M603X6/12A
DC6M603X6/15A
DC6M603X6/18A
-
* Other output voltages are available on request
Three different operation mode versions can be ordered:
`` DC6Mx01 - Modulation select: automatic pulse frequency modulation (PFM) / pulse width modulation (PWM) or forced PWM
mode operation. Selection via the A1 MODE pin.
`` DC6Mx02 - Output voltage select: switch between 2 different output voltages VOUT, e.g. /1218 means 1.2 V or 1.8 V to be
selected via the A1 MODE pin.
`` DC6Mx03 – Power good/XSHUTDOWN output: e.g. enabling a camera device through the A1 pin.
MHz frequency
supports
small inductors
6 MHz 6
frequency
supports
small inductors
WLCSP6 package
6 MHz frequency supports small inductors
5.40mm.
Size: 1.36 x 0.96 x 0.47 mm
0.2 ±0.02
A1
B2
B1
C2
C1
1.36
±0.05
4.7µ
0603
4.7µ
0603
A2
0.26
±0.05
0.27
±0.02
Higher
Higher
Higher
frequency
frequency
frequency
0.96
±0.05
3.70mm.
0.47±0.03
3 MHz
3 MHz
3 MHz
1008
1µ
DC3
Mxx
0.4
±0.05
Side view
Bottom view
balls facing up
Smaller
Smaller
Smaller
inductor
inductor
inductor
Area: 20mm2 Height: 2.5 mm
2 2
Area:
20mm
Height:
2.5mm
Area:
20mm
Height:
2.5 mm
4.05mm.
Package outline
Auto moulation or forwed PWM
output voltage 1 or voltage 2
high if power good
A2
B1
B2
C1
C2
VIN
SW
EN
FB
GND
Supply input voltage
Output voltage switch regulator
Enable
Control feedback
Ground
Pinning
2.2µ
0402
Reduced
Reduced
Reduced
board
space
board space
board space
2.2µ
0402
MODE select
or voltage select
or power good
3.05mm.
A1
DC6
Mxx
0805
470n
2
Area: 12mm
Height: 1.0 mm
Area:
12mm2 Height:
1.0mm
2
Area: 12mm Height: 1.0 mm
Comparison
- typical
inductor
size
DC/DCfrequency
frequency
Comparaison
- typical
inductor
size
vs.vs.
DC/DC
Comparison - typical inductor size vs. DC/DC frequency
www.nxp.com
© 2012 NXP Semiconductors N.V.
All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The
Date of release: October 2012
information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and
Document order number: 9397 750 17340
may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof
Printed in the Netherlands
does not convey nor imply any license under patent- or other industrial or intellectual property rights.
6 MHz
6 MHz
6 MHz