PF1038-02 E0C63455 4-bit Single Chip Microcomputer ● 4-bit E0C63000 Core CPU ● Built-in Dot-matrix LCD Driver ● High Speed Instruction Cycle (2-6CPI) ■ DESCRIPTION The E0C63455 is a CMOS 4-bit microcomputer composed of a CMOS 4-bit core CPU, ROM, RAM, dot-matrix type LCD driver, serial interface and counters. And the E0C63455 can be operated with high speed and spend little current. ■ FEATURES ● CMOS LSI 4-bit parallel processing ..... E0C63000 core CPU ● Main clock ............................................. 32.768kHz (Typ.) crystal / 60kHz (Typ.) CR ● Sub clock .............................................. 1.8MHz (Typ.) CR / 4MHz (Max.) ceramic ● Instruction set ........................................ 46 types (411 instructions with all), 8 typs addressing mode ● Instruction execution time ..................... 32.768kHz 4MHz : 61µsec, : 0.5µsec, ● ROM capacity ....................................... Code ROM Data ROM : 4,096 words × 13 bits : 2,048 words × 4 bits 122µsec, 183µsec 1.0µsec, 1.5µsec ● RAM capacity ........................................ Data memory : 1,024 words × 4 bits Display memory : 480 bits (120 words × 4 bits) ● I/O port .................................................. I : 4 bits (Pull-up resistors may be supplemented) O : 4 bits (It is possible to switch the 2 bits to special output) I/O : 8 bits (It is possible to switch the 4 bits to serial I/F input/output) ● LCD driver ............................................. 60 segments × 8 commons ● Clock timer ............................................ 1 ch. ● Stopwatch timer .................................... 1 ch. ● Programmable timer ............................. 8 bits × 2 ch. ● Watchdog timer ..................................... Built-in ● Serial interface ...................................... 8-bit clock synchronous ● Sound generator ................................... With envelope and 1-shot output functions ● Interrupts ............................................... External : Kye interrupt Internal : Clock timer interrupt : Stopwatch timer interrupt : Programmable timer interrupt : Serial interface interrupt 1 system 4 systems 2 systems 2 systems 1 system ● Power supply voltage ............................ 2.2 to 6.4V (Min. 1.8V with OSC1 crystal oscillation circuit only) ● Operating temperature range ............... -20°C to 70°C ● Current consumption ............................ 1.0µA (32.768kHz, LCD OFF, 3.0V, HALT) 4.0µA (32.768kHz, LCD ON, 3.0V, RUN) 1,000µA (4MHz, LCD ON, 3.0V, RUN) ● Package ................................................ QFP5-128pin / QFP8-128pin (plastic), Die form 1 E0C63455 ■ BLOCK DIAGRAM ROM 4,096 words × 13 bits System Reset Control RESET Core CPU E0C63000 OSC1 OSC2 OSC3 OSC4 OSC Interrupt Generator RAM Stopwatch Timer 1,024 words × 4 bits Clock Timer Data ROM 2,048 words × 4 bits Programmable Timer COM0–7 SEG0–59 LCD Driver 60 SEG × 8 COM K00–K03 Input Port TEST VDD VC1, VC2, VC4, VC5 CA–CF VD1 VSS VREF Power Controller BZ Sound Generator Serial Interface I/O Port P00–P03 P10–P13 Output Port R00–R03 ■ PIN CONFIGURATION QFP5-128pin 102 65 103 64 E0C63455 INDEX 39 128 1 2 38 No. Pin name No. Pin name No. Pin name No. Pin name 1 SEG12 33 N.C. 65 N.C. 97 SEG41 2 SEG11 34 N.C. 66 N.C. 98 N.C. 3 N.C. 35 N.C. 67 N.C. 99 N.C. 4 N.C. 36 N.C. 68 N.C. 100 N.C. 5 N.C. 37 N.C. 69 VC1 101 SEG40 6 N.C. 38 N.C. 70 VC2 102 SEG39 7 N.C. 39 N.C. 71 VC4 103 SEG38 8 SEG10 40 N.C. 72 VC5 104 SEG37 9 SEG9 41 OSC3 73 CF 105 SEG36 10 SEG8 42 OSC4 74 CE 106 SEG35 11 SEG7 43 VDD 75 CD 107 SEG34 12 SEG6 44 RESET 76 CC 108 SEG33 13 SEG5 45 TEST 77 CB 109 SEG32 14 SEG4 46 VREF 78 CA 110 SEG31 15 SEG3 47 R03 79 SEG59 111 SEG30 16 SEG2 48 R02 80 SEG58 112 SEG29 17 SEG1 49 R01 81 SEG57 113 SEG28 18 SEG0 50 R00 82 SEG56 114 SEG27 19 COM7 51 P13 83 SEG55 115 SEG26 20 COM6 52 P12 84 SEG54 116 SEG25 21 COM5 53 P11 85 SEG53 117 SEG24 22 COM4 54 P10 86 SEG52 118 SEG23 23 COM3 55 P03 87 SEG51 119 SEG22 24 COM2 56 P02 88 SEG50 120 SEG21 25 COM1 57 P01 89 SEG49 121 SEG20 26 COM0 58 P00 90 SEG48 122 SEG19 27 BZ 59 K03 91 SEG47 123 SEG18 28 VSS 60 K02 92 SEG46 124 SEG17 29 OSC1 61 K01 93 SEG45 125 SEG16 30 OSC2 62 K00 94 SEG44 126 SEG15 31 VD1 63 N.C. 95 SEG43 127 SEG14 32 N.C. 64 N.C. 96 SEG42 128 SEG13 N.C. : No Connection E0C63455 QFP8-128pin 96 65 64 97 E0C63455 INDEX 33 128 1 32 No. Pin name No. Pin name No. Pin name No. Pin name 1 N.C. 33 65 97 N.C. N.C. N.C. 2 N.C. 34 66 98 SEG40 VC1 N.C. 3 N.C. 35 67 99 VC2 SEG39 N.C. 4 N.C. 36 68 100 SEG38 VC4 N.C. 5 SEG10 37 69 101 SEG37 VC5 N.C. 6 SEG9 38 70 102 SEG36 CF OSC3 7 SEG8 39 71 103 SEG35 CE OSC4 8 SEG7 40 72 104 SEG34 CD VDD 9 SEG6 41 73 105 SEG33 CC RESET 10 SEG5 42 74 106 SEG32 CB TEST 11 SEG4 43 75 107 SEG31 CA VREF 12 SEG3 44 76 SEG59 108 SEG30 R03 13 SEG2 45 77 SEG58 109 SEG29 R02 14 SEG1 46 78 SEG57 110 SEG28 R01 15 SEG0 47 79 SEG56 111 SEG27 R00 16 COM7 48 80 SEG55 112 SEG26 P13 17 COM6 49 81 SEG54 113 SEG25 P12 18 COM5 50 82 SEG53 114 SEG24 P11 19 COM4 51 83 SEG52 115 SEG23 P10 20 COM3 52 84 SEG51 116 SEG22 P03 21 COM2 53 85 SEG50 117 SEG21 P02 22 COM1 54 86 SEG49 118 SEG20 P01 23 COM0 55 87 SEG48 119 SEG19 P00 24 BZ 56 88 SEG47 120 SEG18 K03 25 VSS 57 89 SEG46 121 SEG17 K02 26 58 90 SEG45 122 SEG16 K01 OSC1 27 59 91 SEG44 123 SEG15 K00 OSC2 28 60 92 SEG43 124 SEG14 N.C. VD1 29 61 93 SEG42 125 SEG13 N.C. N.C. 30 62 94 SEG41 126 SEG12 N.C. N.C. 31 63 95 127 SEG11 N.C. N.C. N.C. 32 64 96 128 N.C. N.C. N.C. N.C. N.C. : No Connection ■ PIN DESCRIPTION Pin name VDD VSS VD1 VC1, VC2, VC4, VC5 VREF CA–CF OSC1 Pin No. QFP5-128pin QFP8-128pin 43 40 28 25 31 28 69, 70, 66, 67, 71, 72 68, 69 46 43 78–73 75–70 29 26 In/Out – – – – O O Power (+) supply pin Power (–) supply pin Oscillation/internal logic system regulated voltage output pin LCD system power supply pin 1/4 bias generated internally LCD system power supply testing pin LCD system boosting/reducing capacitor connecting pin Crystal or CR oscillation input pin (selected by mask option) Crystal or CR oscillation output pin (selected by mask option) Ceramic or CR oscillation input pin (selected by mask option) Ceramic or CR oscillation output pin (selected by mask option) Input port I/O port I/O port (switching to serial I/F input/output is possible by software) Output port Output port Output port (switching to TOUT signal output is possible by software) Output port (switching to FOUT signal output is possible by software) LCD common output pin LCD segment output pin O I I Sound output pin Initial reset input pin Testing input pin O – I OSC2 30 27 O OSC3 41 38 I OSC4 42 39 O 62–59 58–55 54–51 59–56 55–52 51–48 I I/O I/O R00 R01 R02 50 49 48 47 46 45 O O O R03 47 44 O K00–K03 P00–P03 P10–P13 COM0–COM7 SEG0–SEG59 BZ RESET TEST 26–19 23–16 18–8, 2–1, 15–5, 127–98, 128–101, 97–79 94–76 27 24 44 41 45 42 Function 3 E0C63455 ■ ELECTRICAL CHARACTERISTICS ● Absolute Maximum Ratings (VSS=0V) Rating Value Symbol Unit Supply voltage -0.5 to 7.0 VDD V Input voltage (1) -0.5 to VDD + 0.3 VI V Input voltage (2) -0.5 to VD1 + 0.3 VIOSC V Permissible total output current *1 ΣIVDD 10 mA -20 to 70 °C Operating temperature Topr -65 to 150 °C Storage temperature Tstg 260°C, 10sec (lead section) – Soldering temperature / time Tsol 250 mW Permissible dissipation *2 PD ∗1: The permissible total output current is the sum total of the current (average current) that simultaneously flows from the output pin (or is drawn in). ∗2: In case of plastic package. ● Recommended Operating Conditions Condition Supply voltage Oscillation frequency Symbol VDD VSS=0V fOSC1 Crystal oscillation CR oscillation fOSC3 CR oscillation Ceramic oscillation Remark OSC3 oscillation OFF OSC1 CR oscillation OSC3 oscillation ON Min. 1.8 2.2 2.2 – 40 (Ta=-20 to 70°C) Typ. Max. Unit 3.0 6.4 V 3.0 6.4 V 3.0 6.4 V 32.768 – kHz 60 80 kHz 1,800 kHz 4,100 kHz ● DC Characteristics (Unless otherwise specified: VDD=3.0V, VSS=0V, fOSC1=32.768kHz, Ta=25°C, VD1/VC1/VC2/VC4/VC5 are internal voltage, C1–C8=0.2µF) Min. Typ. Condition Characteristic Max. Unit Symbol 0.8·VDD K00–03,P00–03, P10–13 High level input voltage (1) VDD V VIH1 RESET, TEST, P10–13 VIH2 0.9·VDD VDD High level input voltage (2) V VIL1 K00–03,P00–03, P10–13 0 0.2·VDD V Low level input voltage (1) VIL2 0.1·VDD V RESET, TEST, P10–13 0 Low level input voltage (2) IIH K00–03, P00–03, P10–13 0.5 VIH=3.0V 0 High level input current µA RESET, TEST IIL1 K00–03, P00–03, P10–13 VIL1=VSS 0 -0.5 Low level input current (1) µA No Pull-up RESET, TEST IIL2 K00–03, P00–03, P10–13 VIL2=VSS -7 -5 -12 Low level input current (2) µA With Pull-up RESET, TEST IOH1 VOH1=0.9·VDD R00–03, P00–03, P10–13 -2 High level output current (1) mA IOH2 VOH2=0.9·VDD BZ -2 High level output current (2) mA IOL1 VOL1=0.1·VDD R00–03, P00–03, P10–13 3 Low level output current (1) mA IOL2 VOL2=0.1·VDD BZ 3 Low level output current (2) mA IOH3 VOH3=VC5-0.05V COM0–7 -25 Common output current µA IOL3 VOL3=VSS+0.05V 25 µA IOH4 VOH4=VC5-0.05V SEG0–59 -10 Segment output current µA IOL4 VOL4=VSS+0.05V 10 µA (Unless otherwise specified: VDD=5.0V, VSS=0V, fOSC1=32.768kHz, Ta=25°C, VD1/VC1/VC2/VC4/VC5 are internal voltage, C1–C8=0.2µF) Min. Typ. Condition Characteristic Max. Unit Symbol 0.8·VDD K00–03,P00–03, P10–13 High level input voltage (1) VDD V VIH1 RESET, TEST, P10–13 VIH2 0.9·VDD VDD High level input voltage (2) V VIL1 K00–03,P00–03, P10–13 0 0.2·VDD V Low level input voltage (1) VIL2 0.1·VDD V RESET, TEST, P10–13 0 Low level input voltage (2) IIH K00–03, P00–03, P10–13 0.5 VIH=5.0V 0 High level input current µA RESET, TEST IIL1 K00–03, P00–03, P10–13 VIL1=VSS 0 -0.5 Low level input current (1) µA No Pull-up RESET, TEST IIL2 K00–03, P00–03, P10–13 VIL2=VSS -12 -9 -20 Low level input current (2) µA With Pull-up RESET, TEST IOH1 VOH1=0.9·VDD R00–03, P00–03, P10–13 -5 High level output current (1) mA IOH2 VOH2=0.9·VDD BZ -5 High level output current (2) mA IOL1 VOL1=0.1·VDD R00–03, P00–03, P10–13 7.5 Low level output current (1) mA IOL2 VOL2=0.1·VDD BZ 7.5 Low level output current (2) mA IOH3 VOH3=VC5-0.05V COM0–7 -25 Common output current µA IOL3 VOL3=VSS+0.05V 25 µA IOH4 VOH4=VC5-0.05V SEG0–59 -10 Segment output current µA IOL4 VOL4=VSS+0.05V 10 µA 4 E0C63455 ● Analog Circuit Characteristics and Current Consumption (Unless otherwise specified: VDD=3.0V, VSS=0V, fOSC1=32.768kHz, CG=25pF, RCR1=600kΩ, RCR2=47kΩ, Ta=25°C, VD1/VC1/VC2/VC4/VC5 are internal voltage, C1–C8=0.2µF) Characteristic Symbol Condition Min. Typ. Max. Unit LCD drive voltage VC1 Connect 1MΩ load resistor between VSS and VC1 LC0–3="0" 0.975 V (when VC1 standard is selected) (without panel load) LC0–3="1" 0.990 LC0–3="2" 1.005 LC0–3="3" 1.020 LC0–3="4" 1.035 LC0–3="5" 1.050 LC0–3="6" 1.065 LC0–3="7" Typ. 1.080 Typ. LC0–3="8" ×0.88 1.095 ×1.12 LC0–3="9" 1.110 LC0–3="10" 1.125 LC0–3="11" 1.140 LC0–3="12" 1.155 LC0–3="13" 1.170 LC0–3="14" 1.185 LC0–3="15" 1.200 VC2 Connect 1MΩ load resistor between VSS and VC2 2·VC1 2·VC1 V (without panel load) ×0.9 V VC4 Connect 1MΩ load resistor between VSS and VC4 3·VC1 3·VC1 (without panel load) ×0.9 V VC5 Connect 1MΩ load resistor between VSS and VC5 4·VC1 4·VC1 (without panel load) ×0.9 LCD drive voltage VC1 Connect 1MΩ load resistor between VSS and VC1 1/2·VC2 1/2·VC2 V (when VC2 standard is selected) (without panel load) ×0.95 +0.1 1.95 V VC2 Connect 1MΩ load resistor between VSS and VC2 LC0–3="0" 1.98 (without panel load) LC0–3="1" 2.01 LC0–3="2" 2.04 LC0–3="3" 2.07 LC0–3="4" 2.10 LC0–3="5" 2.13 LC0–3="6" 2.16 LC0–3="7" Typ. Typ. 2.19 LC0–3="8" ×0.88 ×1.12 2.22 LC0–3="9" 2.25 LC0–3="10" 2.28 LC0–3="11" 2.31 LC0–3="12" 2.34 LC0–3="13" 2.37 LC0–3="14" 2.40 LC0–3="15" VC4 Connect 1MΩ load resistor between VSS and VC4 3/2·VC2 3/2·VC2 V (without panel load) ×0.95 VC5 Connect 1MΩ load resistor between VSS and VC5 2·VC2 V 2·VC2 (without panel load) ×0.95 Current consumption IOP During HALT (32kHz crystal), LCD power OFF *1,*2 1 2 µA During HALT (32kHz crystal), LCD power ON (VC1 standard) *1,*2 6 12 µA During HALT (32kHz crystal), LCD power ON (VC2 standard) *1,*2 4 8 µA During HALT (60kHz CR), LCD power OFF *2 23 45 µA During HALT (60kHz CR), LCD power ON (VC1 standard) *2 30 60 µA During HALT (60kHz CR), LCD power ON (VC2 standard) *2 26 50 µA During execution (32kHz crystal), LCD power ON (VC1 standard) *1,*2 10 19 µA During execution (60kHz CR), LCD power ON (VC1 standard) *2 45 80 µA During execution (2MHz ceramic), LCD power ON (VC1 standard) 500 700 µA During execution (4MHz ceramic), LCD power ON (VC1 standard) 1,000 1,200 µA During execution (1,800kHz CR), LCD power ON (VC1 standard) 700 1,000 µA ∗1: VDC = "0" ∗2: OSCC = "0" 5 E0C63455 ■ BASIC EXTERNAL CONNECTION DIAGRAM I/O P00–P03 P10 (SIN) P11 (SOUT) P12 (SCLK) P13 (SRDY) E0C63455 VD1 VREF [The potential of the substrate (back of the chip) is VSS.] OSC1 C1 C2 C3 + CP C4 C9 CGX RCR1 K00–K03 CA CB CC CD CE CF TEST VDD X'tal Output R00 R01 R02 (TOUT) R03 (FOUT) OSC2 ∗1 OSC3 CGC CR OSC4 Piezo VSS ∗3 ∗1: Crystal oscillation ∗2: CR oscillation ∗3: Ceramic oscillation Coil X'tal CGX RCR1 CR CGC CDC RCR2 C1–C8 C9 CP CRES Crystal oscillator Trimmer capacitor Resistor for OSC1 CR oscillation Ceramic oscillator Gate capacitor Drain capacitor Resistor for OSC3 CR oscillation Capacitor Capacitor Capacitor RESET terminal capacitor 32.768 kHz, CI (Max.) = 34 kΩ 5–25 pF 520 kΩ (60 kHz) 4 MHz (3.0 V) 30 pF 30 pF 34 kΩ (1.8 MHz) 0.2 µF 0.1 µF 3.3 µF 0.1 µF Note: The above table is simply an example, and is not guaranteed to work. 6 ∗2 CRES C5 C6 C7 C8 BZ VC1 VC2 VC4 VC5 RESET CDC ∗2 RCR2 Input COM0 | COM7 SEG0 | SEG59 LCD panel 60 × 8 (1.8 V) 2.2 V | 6.4 V E0C63455 ■ PAD LAYOUT ● Diagram of Pad Layout 20 15 10 5 1 25 105 30 Y X (0, 0) 95 4.02 mm 35 Die No. 100 40 90 45 85 50 55 60 65 70 75 80 3.77 mm Chip thickness: 400 µm Pad opening: 85 µm ● Pad Coordinates No. Pad name 1 OSC3 2 OSC4 3 VDD 4 RESET 5 TEST 6 VREF 7 R03 8 R02 9 R01 10 R00 11 P13 12 P12 13 P11 14 P10 15 P03 16 P02 17 P01 18 P00 19 K03 20 K02 21 K01 22 K00 23 VC1 24 VC2 25 VC4 26 VC5 27 CF X 1,507 1,392 1,277 1,162 1,047 932 817 702 587 472 357 242 127 12 -103 -218 -333 -448 -563 -678 Y 1,892 1,892 1,892 1,892 1,892 1,892 1,892 1,892 1,892 1,892 1,892 1,892 1,892 1,892 1,892 1,892 1,892 1,892 1,892 1,892 No. Pad name 28 CE 29 CD 30 CC 31 CB 32 CA 33 SEG59 34 SEG58 35 SEG57 36 SEG56 37 SEG55 38 SEG54 39 SEG53 40 SEG52 41 SEG51 42 SEG50 43 SEG49 44 SEG48 45 SEG47 46 SEG46 47 SEG45 X -1,764 -1,764 -1,764 -1,764 -1,764 -1,764 -1,764 -1,764 -1,764 -1,764 -1,764 -1,764 -1,764 -1,764 -1,764 -1,764 -1,764 -1,764 -1,764 -1,764 -793 -908 -1,764 1,892 1,892 1,386 48 49 50 SEG44 SEG43 SEG42 -1,764 -1,764 -1,764 -1,764 1,271 1,156 1,041 926 51 52 53 54 SEG41 SEG40 SEG39 SEG38 Y 811 696 581 466 351 236 121 6 -110 -225 -340 -455 -570 -685 -800 -915 -1,030 -1,145 -1,260 -1,375 Unit: µm Y -1,721 -1,606 -1,491 -1,376 -1,261 -1,146 -1,031 -916 -801 -686 -571 -456 -341 -226 -111 4 119 234 349 464 No. Pad name X Y 55 SEG37 -1,299 -1,891 56 SEG36 -1,184 -1,891 57 SEG35 -1,069 -1,891 58 SEG34 -954 -1,891 59 SEG33 -839 -1,891 60 SEG32 -724 -1,891 61 SEG31 -609 -1,891 62 SEG30 -494 -1,891 63 SEG29 -379 -1,891 64 SEG28 -264 -1,891 65 SEG27 -149 -1,891 66 SEG26 -34 -1,891 67 SEG25 81 -1,891 68 SEG24 196 -1,891 69 SEG23 311 -1,891 70 SEG22 426 -1,891 71 SEG21 541 -1,891 72 SEG20 656 -1,891 73 SEG19 771 -1,891 74 SEG18 886 -1,891 No. Pad name 82 SEG10 83 SEG9 84 SEG8 85 SEG7 86 SEG6 87 SEG5 88 SEG4 89 SEG3 90 SEG2 91 SEG1 92 SEG0 93 COM7 94 COM6 95 COM5 96 COM4 97 COM3 98 COM2 99 COM1 100 COM0 101 BZ X 1,764 1,764 1,764 1,764 1,764 1,764 1,764 1,764 1,764 1,764 1,764 1,764 1,764 1,764 1,764 1,764 1,764 1,764 1,764 1,764 -1,764 -1,490 -1,764 -1,605 -1,764 -1,720 75 76 77 SEG17 SEG16 SEG15 1,001 -1,891 1,116 -1,891 1,231 -1,891 102 103 104 1,764 1,764 1,764 579 694 809 -1,764 -1,644 -1,529 -1,414 78 79 80 81 SEG14 SEG13 SEG12 SEG11 1,346 1,461 1,576 1,691 105 1,764 924 -1,835 -1,891 -1,891 -1,891 -1,891 -1,891 -1,891 -1,891 VSS OSC1 OSC2 VD1 7 E0C63455 ■ PACKAGE DIMENSIONS Plastic QFP8-128pin 23.6±0.4 31.2±0.4 20±0.1 28±0.1 102 65 96 103 97 28±0.1 14±0.1 64 17.6±0.4 64 INDEX 65 31.2±0.4 Plastic QFP5-128pin INDEX 39 128 38 33 1.8 3.65max 0.15±0.05 0° 10° 0.8±0.2 3.35±0.1 1 0.2±0.05 0.1 2.7±0.1 3max 0.5 0.1 1 128 32 0.8 0.35±0.1 0.15±0.05 0° 10° 0.6±0.2 1.6 Unit: mm NOTICE: No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of International Trade and Industry or other approval from another government agency. © Seiko Epson Corporation 2000 All right reserved. SEIKO EPSON CORPORATION ELECTRONIC DEVICES MARKETING DIVISION IC Marketing & Engineering Group ED International Marketing Department I (Europe & U.S.A.) 421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN Phone : 042-587-5812 FAX : 042-587-5564 ED International Marketing Department II (Asia) 421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN Phone : 042-587-5814 FAX : 042-587-5110 ■ EPSON Electronic Devices Website http://www.epson.co.jp/device/