SEME-LAB IRFN5210

IRFN5210
MECHANICAL DATA
Dimensions in mm (inches)
P–CHANNEL
POWER MOSFET
4 .1 4 (0 .1 6 3 )
3 .8 4 (0 .1 5 1 )
VDSS
ID(cont)
RDS(on)
3 .6 0 (0 .1 4 2 )
M a x .
3
1 6 .0 2 (0 .6 3 1 )
1 5 .7 3 (0 .6 1 9 )
1
1 0 .6 9 (0 .4 2 1 )
1 0 .3 9 (0 .4 0 9 )
0 .7 6
(0 .0 3 0 )
m in .
0 .8 9
(0 .0 3 5 )
m in .
3 .7 0 (0 .1 4 6 )
3 .7 0 (0 .1 4 6 )
3 .4 1 (0 .1 3 4 )
3 .4 1 (0 .1 3 4 )
2
-100V
-31A
Ω
0.060Ω
FEATURES
• HERMETICALLY SEALED SURFACE
MOUNT PACKAGE
• SMALL FOOTPRINT – EFFICIENT USE OF
PCB SPACE.
9 .6
9 .3
1 1 .5
1 1 .2
7 (0
8 (0
8 (0
8 (0
.3 8
.3 6
.4 5
.4 4
1 )
9 )
6 )
4 )
0 .5 0 (0 .0 2 0 )
0 .2 6 (0 .0 1 0 )
• SIMPLE DRIVE REQUIREMENTS
• LIGHTWEIGHT
• HIGH PACKING DENSITIES
SMD 1 PACKAGE (TO-276AB)
Pad 1 – Source
Pad 2 – Drain
Pad 3 – Gate
Note: IRF5210SMD also available with
pins 1 and 3 reversed.
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
VGS
Gate – Source Voltage
ID
Continuous Drain Current
(VGS = 0 , Tcase = 25°C)
-31A
ID
Continuous Drain Current
(VGS = 0 , Tcase = 100°C)
-19A
IDM
Pulsed Drain Current 1
-124A
PD
Power Dissipation @ Tcase = 25°C
125W
±20V
Linear Derating Factor
1.0W/°C
EAS
Single Pulse Avalanche Energy 2
340mJ
dv/dt
Peak Diode Recovery 3
4.0V/ns
TJ , Tstg
Operating and Storage Temperature Range
TL
Package Mounting Surface Temperature (for 5 sec)
RθJC
Thermal Resistance Junction to Case
–55 to 150°C
300°C
1.0°C/W
Notes 1) Pulse Test: Pulse Width ≤ 300ms, δ ≤ 2%
2) @ VDD = -25V , L = 1.9mH , Peak IAS = -19A , VGS = -10V, RG = 25Ω, Starting TJ = 25°C
3) @ ISD ≤ -19A , di/dt ≤ -390A/μs , VDD ≤ -100V , TJ ≤ 150°C
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc.
Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: [email protected]
Website: http://www.semelab.co.uk
Document Number 5587
Issue 1
IRFN5210
ELECTRICAL CHARACTERISTICS (Tamb = 25°C unless otherwise stated)
Parameter
BVDSS
Test Conditions
STATIC ELECTRICAL RATINGS
Drain – Source Breakdown Voltage
ΔBVDSS Temperature Coefficient of
ΔTJ
RDS(on)
VGS = 0
ID = -250μA
Min.
Resistance 1
VGS(th) Gate Threshold Voltage
1
V / °C
0.06
Ω
-4.0
V
(Ω)
S(Ω
VGS = -10V
ID = -19A
VDS = VGS
ID = -250μA
-2.0
VDS = -50V
IDS = -19A
10
VGS = 0
VDS = -80V
-25
TJ = 125°C
-250
gfs
Forward Transconductance
IDSS
Zero Gate Voltage Drain Current
IGSS
Forward Gate – Source Leakage
VGS = -20V
-100
IGSS
Reverse Gate – Source Leakage
VGS = 20V
100
Ciss
DYNAMIC CHARACTERISTICS
Input Capacitance
VGS = 0
2700
Coss
Output Capacitance
VDS = -25V
830
Crss
Reverse Transfer Capacitance
f = 1MHz
470
Qg
Total Gate Charge 1
Qgs
Gate – Source Charge 1
VGS = -10V
ID = -19A
VGS = -10V
Qgd
Gate – Drain (“Miller”) Charge
td(on)
Turn–On Delay Time
tr
Rise Time
td(off)
Turn–Off Delay Time
tf
Fall Time
IS
SOURCE – DRAIN DIODE CHARACTERISTICS
Continuous Source Current
ID = -19A
30
VDS = -80V
VDD = -50V
115
nA
nC
nC
28
VGS = -10V
150
ID = -19A
103
RG = 2.5Ω
ns
116
-31
2
ISM
Pulse Source Current
VSD
Diode Forward Voltage
trr
Reverse Recovery Time
IF = -19A
Qrr
Reverse Recovery Charge
di / dt ≤ 100A/μs VDD ≤ -50V
ton
Forward Turn–On Time
-124
IS = -19A
μA
pF
215
VDS = -80V
1
Unit
V
-0.11
ID = -1mA
Static Drain – Source On–State
Max.
-100
Reference to 25°C
Breakdown Voltage
Typ.
TJ = 25°C
VGS = 0
TJ = 25°C
A
-1.6
V
290
ns
2.1
μC
Negligible
Notes
1) Pulse Test: Pulse Width ≤ 300ms, δ ≤ 2%
2) Repetitive Rating – Pulse width limited by maximum junction temperature.
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc.
Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: [email protected]
Website: http://www.semelab.co.uk
Document Number 5587
Issue 1