ONSEMI MUN5130DW1T1

MUN5111DW1T1 Series
Preferred Devices
Dual Bias Resistor
Transistors
PNP Silicon Surface Mount Transistors
with Monolithic Bias Resistor Network
http://onsemi.com
The BRT (Bias Resistor Transistor) contains a single transistor with
a monolithic bias network consisting of two resistors; a series base
resistor and a base−emitter resistor. These digital transistors are
designed to replace a single device and its external resistor bias
network. The BRT eliminates these individual components by
integrating them into a single device. In the MUN5111DW1T1 series,
two BRT devices are housed in the SOT−363 package which is ideal
for low−power surface mount applications where board space is at a
premium.
•
•
•
•
(3)
(2)
R1
Q2
R2
(4)
1
SOT−363
CASE 419B
STYLE 1
Symbol
Value
Unit
Collector-Base Voltage
VCBO
−50
Vdc
Collector-Emitter Voltage
VCEO
−50
Vdc
IC
−100
mAdc
MARKING DIAGRAM
6
XXd
THERMAL CHARACTERISTICS
Symbol
Max
Unit
PD
187 (Note 1.)
256 (Note 2.)
1.5 (Note 1.)
2.0 (Note 2.)
mW
Total Device Dissipation
TA = 25°C
Derate above 25°C
Thermal Resistance −
Junction-to-Ambient
Characteristic
(Both Junctions Heated)
(6)
6
(TA = 25°C unless otherwise noted, common for Q1 and Q2)
Characteristic
(One Junction Heated)
R1
(5)
MAXIMUM RATINGS
Collector Current
R2
Q1
Simplifies Circuit Design
Reduces Board Space
Reduces Component Count
Available in 8 mm, 7 inch/3000 Unit Tape and Reel
Rating
(1)
RθJA
670 (Note 1.)
490 (Note 2.)
mW/°C
XX = Specific Device Code
d = Date Code
= (See Page 2)
°C/W
DEVICE MARKING INFORMATION
Symbol
Max
Unit
PD
250 (Note 1.)
385 (Note 2.)
2.0 (Note 1.)
3.0 (Note 2.)
mW
Total Device Dissipation
TA = 25°C
Derate above 25°C
1
mW/°C
Thermal Resistance −
Junction-to-Ambient
RθJA
493 (Note 1.)
325 (Note 2.)
°C/W
Thermal Resistance −
Junction-to-Lead
RθJL
188 (Note 1.)
208 (Note 2.)
°C/W
Junction and Storage
Temperature Range
TJ, Tstg
−55 to +150
°C
See specific marking information in the device marking table
on page 2 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
1. FR−4 @ Minimum Pad
2. FR−4 @ 1.0 x 1.0 inch Pad
 Semiconductor Components Industries, LLC, 2003
December, 2003 − Rev. 5
1
Publication Order Number:
MUN5111DW1T1/D
MUN5111DW1T1 Series
DEVICE MARKING AND RESISTOR VALUES
Device
Package
Marking
R1 (K)
R2 (K)
Shipping
MUN5111DW1T1
SOT−363
0A
10
10
3000/Tape & Reel
MUN5112DW1T1
SOT−363
0B
22
22
3000/Tape & Reel
MUN5113DW1T1
SOT−363
0C
47
47
3000/Tape & Reel
MUN5114DW1T1
SOT−363
0D
10
47
3000/Tape & Reel
MUN5115DW1T1
SOT−363
0E
10
∞
3000/Tape & Reel
MUN5116DW1T1
SOT−363
0F
4.7
∞
3000/Tape & Reel
MUN5130DW1T1
SOT−363
0G
1.0
1.0
3000/Tape & Reel
MUN5131DW1T1
SOT−363
0H
2.2
2.2
3000/Tape & Reel
MUN5132DW1T1
SOT−363
0J
4.7
4.7
3000/Tape & Reel
MUN5133DW1T1
SOT−363
0K
4.7
47
3000/Tape & Reel
MUN5134DW1T1
SOT−363
0L
22
47
3000/Tape & Reel
MUN5135DW1T1
SOT−363
0M
2.2
47
3000/Tape & Reel
MUN5136DW1T1
SOT−363
0N
100
100
3000/Tape & Reel
MUN5137DW1T1
SOT−363
0P
47
22
3000/Tape & Reel
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, common for Q1 and Q2)
Characteristic
Symbol
Min
Typ
Max
Unit
Collector-Base Cutoff Current (VCB = −50 V, IE = 0)
ICBO
−
−
−100
nAdc
Collector-Emitter Cutoff Current (VCE = −50 V, IB = 0)
ICEO
−
−
−500
nAdc
Emitter-Base Cutoff Current
(VEB = −6.0 V, IC = 0)
IEBO
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−0.5
−0.2
−0.1
−0.2
−0.9
−1.9
−4.3
−2.3
−1.5
−0.18
−0.13
−0.2
−0.05
−0.13
mAdc
Collector-Base Breakdown Voltage (IC = −10 µA, IE = 0)
V(BR)CBO
−50
−
−
Vdc
Collector-Emitter Breakdown Voltage (Note 3.) (IC = −2.0 mA, IB = 0)
V(BR)CEO
−50
−
−
Vdc
VCE(sat)
−
−
−0.25
Vdc
OFF CHARACTERISTICS
MUN5111DW1T1
MUN5112DW1T1
MUN5113DW1T1
MUN5114DW1T1
MUN5115DW1T1
MUN5116DW1T1
MUN5130DW1T1
MUN5131DW1T1
MUN5132DW1T1
MUN5133DW1T1
MUN5134DW1T1
MUN5135DW1T1
MUN5136DW1T1
MUN5137DW1T1
ON CHARACTERISTICS (Note 3.)
Collector-Emitter Saturation Voltage (IC = −10 mA, IE = −0.3 mA)
(IC = −10 mA, IB = −5 mA) MUN5130DW1T1/MUN5131DW1T1
(IC = −10 mA, IB = −1 mA) MUN5115DW1T1/MUN5116DW1T1
MUN5132DW1T1/MUN5133DW1T1/MUN5134DW1T1
3. Pulse Test: Pulse Width < 300 µs, Duty Cycle < 2.0%
http://onsemi.com
2
MUN5111DW1T1 Series
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, common for Q1 and Q2) (Continued)
Characteristic
Symbol
Min
Typ
Max
Unit
hFE
35
60
80
80
160
160
3.0
8.0
15
80
80
80
80
80
60
100
140
140
250
250
5.0
15
27
140
130
140
130
140
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−0.2
−0.2
−0.2
−0.2
−0.2
−0.2
−0.2
−0.2
−0.2
−0.2
−0.2
−0.2
−0.2
−0.2
VOH
−4.9
−
−
Vdc
R1
7.0
15.4
32.9
7.0
7.0
3.3
0.7
1.5
3.3
3.3
15.4
1.54
70
32.9
10
22
47
10
10
4.7
1.0
2.2
4.7
4.7
22
2.2
100
47
13
28.6
61.1
13
13
6.1
1.3
2.9
6.1
6.1
28.6
2.86
130
61.1
kΩ
0.8
0.17
−
0.8
0.055
0.38
0.038
1.7
1.0
0.21
−
1.0
0.1
0.47
0.047
2.1
1.2
0.25
−
1.2
0.185
0.56
0.056
2.6
ON CHARACTERISTICS (Note 4.) (Continued)
DC Current Gain
(VCE = −10 V, IC = −5.0 mA)
Output Voltage (on)
(VCC = −5.0 V, VB = −2.5 V, RL = 1.0 kΩ)
(VCC = −5.0 V, VB = −3.5 V, RL = 1.0 kΩ)
(VCC = −5.0 V, VB = −5.5 V, RL = 1.0 kΩ)
(VCC = −5.0 V, VB = −4.0 V, RL = 1.0 kΩ)
MUN5111DW1T1
MUN5112DW1T1
MUN5113DW1T1
MUN5114DW1T1
MUN5115DW1T1
MUN5116DW1T1
MUN5130DW1T1
MUN5131DW1T1
MUN5132DW1T1
MUN5133DW1T1
MUN5134DW1T1
MUN5135DW1T1
MUN5136DW1T1
MUN5137DW1T1
VOL
MUN5111DW1T1
MUN5112DW1T1
MUN5114DW1T1
MUN5115DW1T1
MUN5116DW1T1
MUN5130DW1T1
MUN5131DW1T1
MUN5132DW1T1
MUN5133DW1T1
MUN5134DW1T1
MUN5135DW1T1
MUN5113DW1T1
MUN5136DW1T1
MUN5137DW1T1
Output Voltage (off) (VCC = −5.0 V, VB = −0.5 V, RL = 1.0 kΩ)
(VCC = −5.0 V, VB = −0.05 V, RL = 1.0 kΩ) MUN5130DW1T1
(VCC = −5.0 V, VB = − 0.25 V, RL = 1.0 kΩ) MUN5115DW1T1
MUN5116DW1T1
MUN5131DW1T1
MUN5133DW1T1
Input Resistor
MUN5111DW1T1
MUN5112DW1T1
MUN5113DW1T1
MUN5114DW1T1
MUN5115DW1T1
MUN5116DW1T1
MUN5130DW1T1
MUN5131DW1T1
MUN5132DW1T1
MUN5133DW1T1
MUN5134DW1T1
MUN5135DW1T1
MUN5136DW1T1
MUN5137DW1T1
Resistor Ratio MUN5111DW1T1/MUN5112DW1T1/
MUN5113DW1T1/MUN5136DW1T1
MUN5114DW1T1
MUN5115DW1T1/MUN5116DW1T1
MUN5130DW1T1/MUN5131DW1T1/MUN5132DW1T1
MUN5133DW1T1
MUN5134DW1T1
MUN5135DW1T1
MUN5137DW1T1
R1/R2
4. Pulse Test: Pulse Width < 300 µs, Duty Cycle < 2.0%
http://onsemi.com
3
Vdc
MUN5111DW1T1 Series
ALL MUN5111DW1T1 SERIES DEVICES
PD, POWER DISSIPATION (mW)
300
250
200
150
100
50
0
−50
RθJA = 490°C/W
0
50
100
TA, AMBIENT TEMPERATURE (°C)
Figure 1. Derating Curve − ALL DEVICES
http://onsemi.com
4
150
MUN5111DW1T1 Series
1
1000
IC/IB = 10
hFE , DC CURRENT GAIN (NORMALIZED)
VCE(sat) , COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN5111DW1T1
TA=−25°C
0.1
25°C
75°C
0.01
0
20
40
25°C
100
−25°C
IC, COLLECTOR CURRENT (mA)
10
IC, COLLECTOR CURRENT (mA)
Figure 2. VCE(sat) versus IC
Figure 3. DC Current Gain
1
100
3
IC, COLLECTOR CURRENT (mA)
f = 1 MHz
lE = 0 V
TA = 25°C
2
1
0
10
20
30
40
VR, REVERSE BIAS VOLTAGE (VOLTS)
100
TA=−25°C
1
0.1
0.01
VO = 5 V
0
1
2
3
4
5
6
7
Vin, INPUT VOLTAGE (VOLTS)
VO = 0.2 V
TA=−25°C
25°C
75°C
1
0
8
9
Figure 5. Output Current versus Input Voltage
10
0.1
100
25°C
75°C
10
0.001
50
Figure 4. Output Capacitance
V in , INPUT VOLTAGE (VOLTS)
Cob , CAPACITANCE (pF)
TA=75°C
10
50
4
0
VCE = 10 V
10
20
30
IC, COLLECTOR CURRENT (mA)
40
Figure 6. Input Voltage versus Output Current
http://onsemi.com
5
50
10
MUN5111DW1T1 Series
1000
10
hFE , DC CURRENT GAIN (NORMALIZED)
VCE(sat) , COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN5112DW1T1
IC/IB = 10
1
25°C
TA=−25°C
75°C
0.1
0.01
0
40
20
IC, COLLECTOR CURRENT (mA)
TA=75°C
10
1
Figure 8. DC Current Gain
100
IC, COLLECTOR CURRENT (mA)
3
2
1
10
20
30
40
VR, REVERSE BIAS VOLTAGE (VOLTS)
TA=−25°C
10
1
0.1
0.01
0.001
50
Figure 9. Output Capacitance
100
25°C
75°C
f = 1 MHz
lE = 0 V
TA = 25°C
V in , INPUT VOLTAGE (VOLTS)
Cob , CAPACITANCE (pF)
4
0
VO = 5 V
0
1
2
3
4
5
6
7
Vin, INPUT VOLTAGE (VOLTS)
VO = 0.2 V
10
25°C
75°C
1
0
10
8
9
Figure 10. Output Current versus Input Voltage
TA=−25°C
0.1
100
IC, COLLECTOR CURRENT (mA)
Figure 7. VCE(sat) versus IC
0
25°C
−25°C
100
10
50
VCE = 10 V
20
30
IC, COLLECTOR CURRENT (mA)
40
50
Figure 11. Input Voltage versus Output Current
http://onsemi.com
6
10
MUN5111DW1T1 Series
1
1000
IC/IB = 10
TA=−25°C
25°C
75°C
0.1
0.01
hFE , DC CURRENT GAIN (NORMALIZED)
VCE(sat) , COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN5113DW1T1
0
10
20
30
IC, COLLECTOR CURRENT (mA)
VCE = 10 V
TA=75°C
25°C
−25°C
100
10
40
1
10
IC, COLLECTOR CURRENT (mA)
Figure 12. VCE(sat) versus IC
Figure 13. DC Current Gain
1
IC, COLLECTOR CURRENT (mA)
0.6
0.4
0.2
0
0
−25°C
1
0.1
0.01
Figure 14. Output Capacitance
VO = 5 V
1
0
2
3
4
5
6
7
Vin, INPUT VOLTAGE (VOLTS)
VO = 0.2 V
TA=−25°C
25°C
75°C
1
0.1
0
10
8
9
Figure 15. Output Current versus Input Voltage
100
10
25°C
TA=75°C
10
0.001
50
10
20
30
40
VR, REVERSE BIAS VOLTAGE (VOLTS)
V in , INPUT VOLTAGE (VOLTS)
Cob , CAPACITANCE (pF)
100
f = 1 MHz
lE = 0 V
TA = 25°C
0.8
100
20
30
IC, COLLECTOR CURRENT (mA)
40
Figure 16. Input Voltage versus Output Current
http://onsemi.com
7
50
10
MUN5111DW1T1 Series
1
180
IC/IB = 10
hFE , DC CURRENT GAIN (NORMALIZED)
VCE(sat) , COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN5114DW1T1
TA=−25°C
25°C
0.1
75°C
0.01
0.001
0
20
40
60
IC, COLLECTOR CURRENT (mA)
25°C
140
−25°C
120
100
80
60
40
20
0
80
TA=75°C
VCE = 10 V
160
2
1
4
6
Figure 17. VCE(sat) versus IC
100
TA=75°C
3.5
IC, COLLECTOR CURRENT (mA)
f = 1 MHz
lE = 0 V
TA = 25°C
4
3
2.5
2
1.5
1
0.5
0
2
4
6 8 10 15 20 25 30 35 40
VR, REVERSE BIAS VOLTAGE (VOLTS)
45
10
VO = 5 V
0
2
4
6
Vin, INPUT VOLTAGE (VOLTS)
VO = 0.2 V
25°C
TA=−25°C
75°C
1
0
10
8
10
Figure 20. Output Current versus Input Voltage
10
0.1
25°C
−25°C
1
50
Figure 19. Output Capacitance
V in , INPUT VOLTAGE (VOLTS)
Cob , CAPACITANCE (pF)
80 90 100
Figure 18. DC Current Gain
4.5
0
8 10 15 20 40 50 60 70
IC, COLLECTOR CURRENT (mA)
20
30
IC, COLLECTOR CURRENT (mA)
40
50
Figure 21. Input Voltage versus Output Current
http://onsemi.com
8
MUN5111DW1T1 Series
1
1000
IC/IB = 10
75°C
0.1
−25°C
25°C
0.01
0.001
0
20
40
30
10
IC, COLLECTOR CURRENT (mA)
TA = −25°C
100
10
1
50
25°C
1
10
IC, COLLECTOR CURRENT (mA)
Figure 22. VCE(sat) versus IC
100
Figure 23. DC Current Gain
12
100
10
IC, COLLECTOR CURRENT (mA)
f = 1 MHz
lE = 0 V
TA = 25°C
8
6
4
2
0
75°C
10
25°C
1
TA = −25°C
0.1
0.01
VO = 5 V
0.001
0
5
10 15 20 25 30 35 40 45
VR, REVERSE BIAS VOLTAGE (VOLTS)
0
50
Figure 24. Output Capacitance
1
2
3
4
5
6
7
8
Vin, INPUT VOLTAGE (VOLTS)
VO = 0.2 V
TA = −25°C
1
25°C
75°C
0.1
0
9
10
Figure 25. Output Current versus Input Voltage
10
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
VCE = 10 V
75°C
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN5115DW1T1
10
20
30
40
IC, COLLECTOR CURRENT (mA)
Figure 26. Input Voltage versus Output Current
http://onsemi.com
9
50
MUN5111DW1T1 Series
1
1000
IC/IB = 10
75°C
0.1
−25°C
25°C
0.01
0.001
0
20
40
30
10
IC, COLLECTOR CURRENT (mA)
25°C
10
1
50
TA = −25°C
100
1
10
IC, COLLECTOR CURRENT (mA)
Figure 27. VCE(sat) versus IC
100
Figure 28. DC Current Gain
12
100
10
IC, COLLECTOR CURRENT (mA)
f = 1 MHz
lE = 0 V
TA = 25°C
8
6
4
2
0
75°C
10
25°C
1
TA = −25°C
0.1
0.01
VO = 5 V
0.001
0
5
10 15 20 25 30 35 40 45
VR, REVERSE BIAS VOLTAGE (VOLTS)
0
50
Figure 29. Output Capacitance
1
2
3
4
5
6
7
8
Vin, INPUT VOLTAGE (VOLTS)
TA = −25°C
1
25°C
75°C
VO = 0.2 V
0.1
0
9
10
Figure 30. Output Current versus Input Voltage
10
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
VCE = 10 V
75°C
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN5116DW1T1
10
20
30
40
IC, COLLECTOR CURRENT (mA)
Figure 31. Input Voltage versus Output Current
http://onsemi.com
10
50
MUN5111DW1T1 Series
1
1000
VCE = 10 V
IC/IB = 10
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN5130DW1T1
75°C
0.1
−25°C
25°C
0.01
100
75°C
10
25°C
TA = −25°C
0.001
0
5
10
15
20
25
IC, COLLECTOR CURRENT (mA)
1
30
1
10
IC, COLLECTOR CURRENT (mA)
Figure 32. VCE(sat) versus IC
100
Figure 33. DC Current Gain
IC, COLLECTOR CURRENT (mA)
TBD
75°C
10
25°C
1
TA = −25°C
0.1
0.01
VO = 5 V
0.001
0
1
2
VR, REVERSE BIAS VOLTAGE (VOLTS)
Figure 34. Output Capacitance
3
4
5
6
7
8
Vin, INPUT VOLTAGE (VOLTS)
TA = −25°C
1
75°C
25°C
VO = 0.2 V
0.1
0
9
10
Figure 35. Output Current versus Input Voltage
10
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
100
5
10
15
20
IC, COLLECTOR CURRENT (mA)
Figure 36. Input Voltage versus Output Current
http://onsemi.com
11
25
MUN5111DW1T1 Series
1
1000
VCE = 10 V
IC/IB = 10
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN5131DW1T1
75°C
0.1
−25°C
25°C
0.01
0.001
0
5
10
15
20
25
IC, COLLECTOR CURRENT (mA)
100
75°C
TA = −25°C
1
30
25°C
10
1
10
IC, COLLECTOR CURRENT (mA)
Figure 37. VCE(sat) versus IC
Figure 38. DC Current Gain
12
100
IC, COLLECTOR CURRENT (mA)
f = 1 MHz
lE = 0 V
TA = 25°C
10
8
6
4
2
0
10 75°C
25°C
1
TA = −25°C
0.1
0.01
VO = 5 V
0.001
0
5
10 15 20 25 30 35 40 45
VR, REVERSE BIAS VOLTAGE (VOLTS)
0
50
Figure 39. Output Capacitance
1
2
3
4
5
6
7
8
Vin, INPUT VOLTAGE (VOLTS)
TA = −25°C
1
75°C
25°C
VO = 0.2 V
0.1
0
9
10
Figure 40. Output Current versus Input Voltage
10
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
100
5
10
15
20
IC, COLLECTOR CURRENT (mA)
Figure 41. Input Voltage versus Output Current
http://onsemi.com
12
25
MUN5111DW1T1 Series
1
1000
VCE = 10 V
IC/IB = 10
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN5132DW1T1
75°C
0.1
−25°C
25°C
0.01
0.001
0
20
40
30
10
IC, COLLECTOR CURRENT (mA)
75°C
100
25°C
10
TA = −25°C
1
50
1
10
IC, COLLECTOR CURRENT (mA)
Figure 42. VCE(sat) versus IC
Figure 43. DC Current Gain
12
100
IC, COLLECTOR CURRENT (mA)
f = 1 MHz
lE = 0 V
TA = 25°C
10
8
6
4
2
0
75°C
10
25°C
1
TA = −25°C
0.1
0.01
VO = 5 V
0.001
0
5
10 15 20 25 30 35 40 45
VR, REVERSE BIAS VOLTAGE (VOLTS)
0
50
Figure 44. Output Capacitance
1
2
3
4
5
6
7
8
Vin, INPUT VOLTAGE (VOLTS)
TA = −25°C
25°C
1
75°C
VO = 0.2 V
0.1
0
9
10
Figure 45. Output Current versus Input Voltage
10
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
100
10
20
30
40
IC, COLLECTOR CURRENT (mA)
Figure 46. Input Voltage versus Output Current
http://onsemi.com
13
50
MUN5111DW1T1 Series
1
1000
VCE = 10 V
IC/IB = 10
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN5133DW1T1
75°C
0.1
−25°C
25°C
0.01
0.001
0
20
40
30
10
IC, COLLECTOR CURRENT (mA)
75°C
100
1
10
IC, COLLECTOR CURRENT (mA)
Figure 47. VCE(sat) versus IC
100
Figure 48. DC Current Gain
8
100
6
IC, COLLECTOR CURRENT (mA)
f = 1 MHz
lE = 0 V
TA = 25°C
7
5
4
3
2
1
0
75°C
10
25°C
1
0.1
TA = −25°C
0.01
VO = 5 V
0.001
0
5
10 15 20 25 30 35 40 45
VR, REVERSE BIAS VOLTAGE (VOLTS)
50
0
Figure 49. Output Capacitance
1
2
7
8
3
4
5
6
Vin, INPUT VOLTAGE (VOLTS)
TA = −25°C
1
75°C
25°C
VO = 0.2 V
0.1
0
9
10
Figure 50. Output Current versus Input Voltage
10
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
25°C
10
1
50
TA = −25°C
10
20
30
40
IC, COLLECTOR CURRENT (mA)
Figure 51. Input Voltage versus Output Current
http://onsemi.com
14
50
MUN5111DW1T1 Series
1
1000
VCE = 10 V
IC/IB = 10
75°C
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN5134DW1T1
75°C
0.1
−25°C
25°C
0.01
0.001
0
20
40
30
10
IC, COLLECTOR CURRENT (mA)
100
1
10
IC, COLLECTOR CURRENT (mA)
Figure 52. VCE(sat) versus IC
100
Figure 53. DC Current Gain
3.5
100
2.5
IC, COLLECTOR CURRENT (mA)
f = 1 MHz
lE = 0 V
TA = 25°C
3
2
1.5
1
0.5
0
75°C
10
25°C
1
0.1
TA = −25°C
0.01
VO = 5 V
0.001
0
5
10 15 20 25 30 35 40 45
VR, REVERSE BIAS VOLTAGE (VOLTS)
0
50
Figure 54. Output Capacitance
1
2
3
4
5
6
7
8
Vin, INPUT VOLTAGE (VOLTS)
10
TA = −25°C
1
75°C
25°C
VO = 0.2 V
0.1
0
9
10
Figure 55. Output Current versus Input Voltage
100
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
25°C
10
1
50
TA = −25°C
40
10
20
30
IC, COLLECTOR CURRENT (mA)
Figure 56. Input Voltage versus Output Current
http://onsemi.com
15
50
MUN5111DW1T1 Series
1
1000
VCE = 10 V
IC/IB = 10
hFE, DC CURRENT GAIN
VCE(sat), COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN5135DW1T1
75°C
0.1
−25°C
25°C
0.01
0.001
0
20
40
30
10
IC, COLLECTOR CURRENT (mA)
75°C
100
1
10
IC, COLLECTOR CURRENT (mA)
Figure 57. VCE(sat) versus IC
100
IC, COLLECTOR CURRENT (mA)
f = 1 MHz
lE = 0 V
TA = 25°C
8
6
4
2
0
75°C
10
25°C
1
TA = −25°C
0.1
0.01
VO = 5 V
0.001
0
5
10 15 20 25 30 35 40 45
VR, REVERSE BIAS VOLTAGE (VOLTS)
0
50
Figure 59. Output Capacitance
1
2
3
4
5
6
7
8
Vin, INPUT VOLTAGE (VOLTS)
TA = −25°C
1
75°C
25°C
VO = 0.2 V
0.1
0
9
10
Figure 60. Output Current versus Input Voltage
10
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
100
Figure 58. DC Current Gain
12
10
25°C
10
1
50
TA = −25°C
10
20
30
40
IC, COLLECTOR CURRENT (mA)
Figure 61. Input Voltage versus Output Current
http://onsemi.com
16
50
MUN5111DW1T1 Series
1
0.1
−25°C
75°C
25°C
IC/IB = 10
0.01
0
1
2
3
4
5
IC, COLLECTOR CURRENT (mA)
6
7
hFE, DC CURRENT GAIN (NORMALIZED)
VCE(sat), COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN5136DW1T1
1000
75°C
TA = −25°C
100
25°C
10
VCE = 10 V
1
1
10
IC, COLLECTOR CURRENT (mA)
Figure 62. VCE(sat) versus IC
Figure 63. DC Current Gain
100
IC, COLLECTOR CURRENT (mA)
f = 1 MHz
IE = 0 V
TA = 25°C
1.0
0.8
0.6
0.4
0.2
25°C
10
20
30
40
50
VR, REVERSE BIAS VOLTAGE (VOLTS)
60
TA = −25°C
1
V
VO
O == 55VV
0
1
2
3
4
TA = −25°C
10
VO = 0.2 V
75°C
0
2
6
7
8
9
10
Figure 65. Output Current versus Input Voltage
100
1
5
Vin, INPUT VOLTAGE (VOLTS)
Figure 64. Output Capacitance
25°C
75°C
10
0.1
0
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
1.2
0
100
4
6
8
10 12
14
16
IC, COLLECTOR CURRENT (mA)
18
Figure 66. Input Voltage versus Output Current
http://onsemi.com
17
20
MUN5111DW1T1 Series
hFE, DC CURRENT GAIN (NORMALIZED)
VCE(sat), COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — MUN5137DW1T1
1
TA = −25°C
75°C
0.1
25°C
IC/IB = 10
0.01
0
5
10 15
20 25 30 35 40
IC, COLLECTOR CURRENT (mA)
45
50
1000
75°C
TA = −25°C
100
25°C
VCE = 10 V
10
1
10
IC, COLLECTOR CURRENT (mA)
Figure 67. VCE(sat) versus IC
Figure 68. DC Current Gain
100
1.2
IC, COLLECTOR CURRENT (mA)
f = 1 MHz
IE = 0 V
TA = 25°C
1.0
0.8
0.6
0.4
0.2
75°C
10
20
30
40
50
VR, REVERSE BIAS VOLTAGE (VOLTS)
60
TA = −25°C
10
25°C
1
0.1
0.01
0.001
0
VO = 5 V
0
1
2
3
4
VO = 0.2 V
1
TA = −25°C
75°C
25°C
0
6
7
8
9
10
11
Figure 70. Output Current versus Input Voltage
100
10
5
Vin, INPUT VOLTAGE (VOLTS)
Figure 69. Output Capacitance
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
1.4
0
100
5
10
15
20
IC, COLLECTOR CURRENT (mA)
25
Figure 71. Input Voltage versus Output Current
http://onsemi.com
18
MUN5111DW1T1 Series
PACKAGE DIMENSIONS
SC−88 (SOT−363)
CASE 419B−02
ISSUE T
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. 419B−01 OBSOLETE, NEW STANDARD 419B−02.
G
6
5
4
DIM
A
B
C
D
G
H
J
K
N
S
−B−
S
1
2
3
D 6 PL
0.2 (0.008)
M
B
M
STYLE 1:
PIN 1.
2.
3.
4.
5.
6.
N
J
C
H
INCHES
MIN
MAX
0.071 0.087
0.045 0.053
0.031 0.043
0.004 0.012
0.026 BSC
−−− 0.004
0.004 0.010
0.004 0.012
0.008 REF
0.079 0.087
EMITTER 2
BASE 2
COLLECTOR 1
EMITTER 1
BASE 1
COLLECTOR 2
K
SOLDERING FOOTPRINT*
0.50
0.0197
0.65
0.025
0.65
0.025
0.40
0.0157
1.9
0.0748
SCALE 20:1
mm inches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
19
MILLIMETERS
MIN
MAX
1.80
2.20
1.15
1.35
0.80
1.10
0.10
0.30
0.65 BSC
−−−
0.10
0.10
0.25
0.10
0.30
0.20 REF
2.00
2.20
MUN5111DW1T1 Series
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
20
For additional information, please contact your
local Sales Representative.
MUN5111DW1T1/D