Power Transistors 2SD1754, 2SD1754A Silicon NPN triple diffusion planar type Unit: mm 7.0±0.3 For power amplification with high forward current transfer ratio +0.3 1.0±0.2 10.0 –0. High foward current transfer ratio hFE Satisfactory linearity of foward current transfer ratio hFE I type package enabling direct soldering of the radiating fin to the printed circuit board, etc. of small electronic equipment. 2.3±0.2 4.6±0.4 1 2SD1754A Collector to 2SD1754 emitter voltage 2SD1754A 100 V 80 Emitter to base voltage VEBO 6 V Peak collector current ICP 6 A Collector current IC 3 A Base current IB 1 A Collector power TC=25°C dissipation Ta=25°C 15 PC Junction temperature Tj Storage temperature Tstg ■ Electrical Characteristics Parameter 2SD1754 current 2SD1754A W 150 ˚C –55 to +150 ˚C 0.75±0.1 0.5 max. 1.1±0.1 1 0.9±0.1 0 to 0.15 2 3 4.6±0.4 1:Base 2:Collector 3:Emitter I Type Package (Y) (TC=25˚C) Symbol Collector cutoff 0 to 0.15 2.5 2.3±0.2 1.3 Unit: mm V 3.0±0.2 60 VCEO 3.5±0.2 1.0 base voltage 7.0±0.3 2.0±0.2 80 VCBO Unit 2.5±0.2 2SD1754 Ratings 1.0 max. Symbol Collector to 1:Base 2:Collector 3:Emitter I Type Package 3 7.2±0.3 Parameter 2 (TC=25˚C) 10.2±0.3 ■ Absolute Maximum Ratings 0.85±0.1 0.4±0.1 1.0 ● 1.1±0.1 0.75±0.1 2.5±0.2 ● 0.8±0.2 7.2±0.3 ■ Features ● 3.5±0.2 3.0±0.2 ICBO Conditions min typ max VCB = 80V, IE = 0 100 VCB = 100V, IE = 0 100 Unit µA Collector cutoff current ICEO VCE = 40V, IB = 0 100 µA Emitter cutoff current IEBO VEB = 6V, IC = 0 100 µA VCEO IC = 25mA, IB = 0 Forward current transfer ratio hFE* VCE = 4V, IC = 0.5A Collector to emitter saturation voltage VCE(sat) IC = 2A, IB = 0.05A Transition frequency fT VCE = 12V, IC = 0.2A, f = 10MHz Collector to emitter 2SD1754 voltage 2SD1754A *h FE 60 V 80 500 1500 1 30 V MHz Rank classification Rank hFE Q P 500 to 1000 800 to 1500 1 Power Transistors 2SD1754, 2SD1754A PC — Ta IC — VCE TC=25˚C 1mA 10 5 0.8 0.7mA 0.6mA 0.6 0.5mA 0.4mA 0.4 0.3mA 0.2mA 0.2 20 40 60 80 100 120 140 160 2 4 2 6 8 10 12 0 Collector to emitter voltage VCE (V) VCE(sat) — IC hFE — IC 3000 –25˚C 0.3 0.1 0.03 0.01 0.01 0.03 0.1 0.3 1 3 25˚C 300 100 30 10 3 0.1 0.3 1 3 10 I CP t=1ms 300ms 1 10ms 0.3 3 10 30 2SD1754A 2SD1754 0.1 0.01 100 300 Collector to emitter voltage VCE 10 1000 (V) 0.1 0.3 1 3 Collector current IC (A) Rth(t) — t Thermal resistance Rth(t) (˚C/W) Non repetitive pulse TC=25˚C 0.03 30 1 0.01 0.03 10 103 IC 100 3 Area of safe operation (ASO) 30 300 Collector current IC (A) 100 1.2 1000 –25˚C 1 0.01 0.03 10 1.0 VCE=12V f=10MHz TC=25˚C 3000 TC=100˚C Transition frequency fT (MHz) 25˚C 1 0.8 fT — IC 1000 TC=100˚C 0.6 VCE=4V Forward current transfer ratio hFE 10 0.4 10000 IC/IB=40 30 3 0.2 Base to emitter voltage VBE (V) 10000 100 Collector current IC (A) Collector current IC (A) –25˚C 0 0 Ambient temperature Ta (˚C) 1 TC=100˚C 3 1 0 3 25˚C 4 0.1mA (2) 0 2 Collector current IC (A) (1) 15 5 IB=1.2mA (1) TC=Ta (2) Without heat sink (PC=1.3W) 0 Collector to emitter saturation voltage VCE(sat) (V) IC — VBE 1.0 Collector current IC (A) Collector power dissipation PC (W) 20 (1) Without heat sink (2) With a 50 × 50 × 2mm Al heat sink 102 (1) (2) 10 1 10–1 10–4 10–3 10–2 10–1 1 Time t (s) 10 102 103 104 10 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR