RoHS Power Chip Shielded Inductors Dimensions: PCSDR124 Inches (mm) 8 8 Allied Part Number Inductance Tolerance (µh) (%) Test Freq. KHz, 0.1V DCR (Ω) PCSDR124-R47T-RC PCSDR124-R82T-RC 0.47 0.82 30 30 100 100 0.0022 0.0037 PCSDR124-1R5T-RC PCSDR124-2R2T-RC 1.5 2.2 30 30 100 100 0.0055 0.0070 PCSDR124-3R3T-RC 3.3 0.0100 3.9 30 30 100 PCSDR124-3R9T-RC 100 PCSDR124-4R7T-RC 4.7 30 PCSDR124-6R8T-RC 6.8 30 PCSDR124-7R6T-RC I rms (A) I sat (A) 15.377 12.114 9.619 8.566 7.161 30.800 22.000 0.0149 5.859 10.300 100 0.0160 5.657 9.060 100 0.0220 4.823 8.110 17.100 14.000 11.800 7.6 30 100 0.0250 4.523 7.330 PCSDR124-100M-RC 10 20 100 0.0307 4.077 6.700 PCSDR124-120M-RC 12 20 100 0.4110 3.538 5.700 PCSDR124-150M-RC 15 20 100 0.0437 3.419 5.310 PCSDR124-180M-RC 18 100 0.0554 3.035 4.670 PCSDR124-220M-RC 22 20 20 100 0.0642 2.820 4.400 PCSDR124-270M-RC 27 20 100 0.0761 2.591 3.950 PCSDR124-330M-RC 33 20 100 0.0911 2.368 3.580 PCSDR124-390M-RC 39 20 100 0.1209 2.056 3.280 PCSDR124-470M-RC 47 20 100 0.1458 1.872 3.020 PCSDR124-560M-RC 56 20 100 0.1709 1.729 2.700 PCSDR124-680M-RC 68 20 100 0.2220 1.517 2.440 PCSDR124-820M-RC 82 20 100 0.2484 1.434 2.230 PCSDR124-101M-RC 100 20 100 0.3276 1.249 2.000 PCSDR124-121M-RC 120 20 100 0.3790 1.161 1.810 PCSDR124-151M-RC 150 20 100 0.4308 1.089 1.630 PCSDR124-181M-RC 100 0.6103 0.915 1.500 180 20 PCSDR124-221M-RC 220 20 100 0.6492 0.887 1.360 PCSDR124-271M-RC 270 20 100 0.9540 0.732 1.230 PCSDR124-331M-RC 330 20 100 1.0000 PCSDR124-391M-RC 390 20 100 1.3420 0.714 0.617 1.050 PCSDR124-471M-RC 470 20 100 1.4640 0.591 0.940 PCSDR124-561M-RC 560 20 100 1.8230 0.529 0.860 PCSDR124-681M-RC 680 20 100 2.1840 0.484 0.770 PCSDR124-821M-RC PCSDR124-102M-RC PCSDR124-122M-RC 820 1000 1200 20 20 20 100 100 100 2.4480 3.2280 5.0770 0.457 0.398 0.317 0.700 0.650 0.600 Features • Magnetically Shielded • High saturation current • • • • • Expanded operating temp range Low DC Resistance High Energy Storage Low Energy Loss Suitable for pick and place Electrical Inductance Range: .47µh to 1200µh Tolerance: .47µh~7.6µh 30%, 10µh~1200µh 20% Available in tighter tolerances Test Frequency: 100KHz, 0.1V Operating Temp: -55ºC ~ +125ºC Irms: Current at which the ∆ T=40ºC Isat: Current at which the inductance drops 35% from initial value Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC Immersion time: 10 sec. +/- 1 sec. Test Equipment (L): HP 4284A LCR meter or equivalent (RDC): HP 4338B Millohm meter or equivalent (IDC): 3260B WK & DC Bias 3265B WK 1.110 Physical Packaging: 600 pieces per 13 inch reel. Marking: EIA Inductance Code. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED15 8/7/09 www.alliedcomponents.com