RoHS Power Chip Shielded Inductors Dimensions: PCSDR125 Inches (mm) 8 8 Allied Part Number Inductance Tolerance (µh) (%) Test Freq. KHz, 0.1V DCR (Ω) I rms (A) I sat (A) 17.401 15.069 13.709 11.005 9.301 32.960 23.540 PCSDR125-R47T-RC PCSDR125-R82T-RC 0.47 0.82 30 30 100 100 0.0022 0.0029 PCSDR125-1R5T-RC PCSDR125-2R2T-RC 1.5 2.2 30 30 100 100 0.0035 0.0054 PCSDR125-3R3T-RC 3.3 0.0076 3.9 30 30 100 PCSDR125-3R9T-RC 100 0.0099 7.346 10.990 PCSDR125-4R7T-RC 4.7 30 100 0.0126 7.204 9.690 PCSDR125-6R8T-RC 6.8 30 100 0.0148 6.656 8.670 PCSDR125-8R2M-RC 18.310 14.980 12.680 8.2 20 100 0.0200 5.565 7.850 PCSDR125-100M-RC 10 20 100 0.0227 5.370 7.170 PCSDR125-120M-RC 12 20 100 0.0250 4.736 6.590 PCSDR125-150M-RC 15 20 100 0.0334 4.277 5.680 PCSDR125-180M-RC 18 100 0.0373 3.896 5.320 PCSDR125-220M-RC 22 20 20 100 0.0475 3.710 4.710 PCSDR125-270M-RC 27 20 100 0.0594 3.318 4.230 PCSDR125-330M-RC 33 20 100 0.0606 3.285 3.830 PCSDR125-390M-RC 39 20 100 0.0767 2.920 3.510 PCSDR125-470M-RC 47 20 100 0.0888 2.714 3.230 PCSDR125-560M-RC 56 20 100 0.1062 2.482 2.890 PCSDR125-680M-RC 68 20 100 0.1282 2.323 2.620 PCSDR125-820M-RC 82 20 100 0.1700 2.063 2.460 PCSDR125-101M-RC 100 20 100 0.2040 1.790 2.200 PCSDR125-121M-RC 120 20 100 0.2350 1.668 2.030 PCSDR125-151M-RC 150 20 100 0.3350 1.482 1.810 PCSDR125-181M-RC 100 0.3630 1.341 1.660 180 20 PCSDR125-221M-RC 220 20 100 0.4920 1.191 1.510 PCSDR125-271M-RC 270 20 100 0.5700 1.091 1.340 PCSDR125-331M-RC 330 20 100 0.6500 PCSDR125-391M-RC 390 20 100 0.7200 1.063 0.969 1.110 PCSDR125-471M-RC 470 20 100 0.9820 0.871 1.010 PCSDR125-561M-RC 560 20 100 1.1300 0.778 0.910 PCSDR125-681M-RC 680 20 100 1.3200 0.704 0.850 PCSDR125-821M-RC PCSDR125-102M-RC PCSDR125-122M-RC 820 1000 1200 20 20 20 100 100 100 1.7880 2.0280 2.3300 0.605 0.568 0.530 0.770 0.700 0.630 Features • Magnetically Shielded • High saturation current • • • • • Expanded operating temp range Low DC Resistance High Energy Storage Low Energy Loss Suitable for pick and place Electrical Inductance Range: .47µh to 1200µh Tolerance: .47µh~6.8µh 30%, 8.2µh~1200µh 20% Available in tighter tolerances Test Frequency: 100KHz, 0.1V Operating Temp: -55ºC ~ +125ºC Irms: Current at which the ∆ T=40ºC Isat: Current at which the inductance drops 35% from initial value Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC Immersion time: 10 sec. +/- 1 sec. Test Equipment (L): HP 4284A LCR meter or equivalent (RDC): HP 4338B Millohm meter or equivalent (IDC): 3260B WK & DC Bias 3265B WK 1.200 Physical Packaging: 600 pieces per 13 inch reel. Marking: EIA Inductance Code. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED15 8/7/09 www.alliedcomponents.com