MEDICAL & MILITARY PMP120 Series 9 6 - 1 2 0 W AT T S S I N G L E O U T P U T A C / D C M E D I C A L - P R E L I M I N A R Y Features • Low safety ground leakage current. • Overvoltage protection. • Overcurrent protection. • 100% burn-in at full rated load. Specifications OPERATING INPUT Input Voltage 90-264Vac Frequency 47Hz–67Hz Input Current 1.60A (rms) for 115Vac. 0.80A (rms) for 230Vac. Leakage current 90µA max. @ 115Vac. 60Hz. 150µA max. @ 230Vac. 50Hz. Isolation Input – Output: 4000VAC Input – Ground: 1500VAC Output – Ground: 500VAC Inrush Current 60A @ 115V, 120A @ 230V OUTPUT MTBF 150,000 hrs @ 25°C Efficiency 78-84% minimum. ENVIRONMENTAL Operating Temperature 0°C to 60°C Derating Derate to 50% at 60°C Storage Temperature -40°C to 85°C Relative Humidity 5%–95% non-condensing STANDARDS AND APPROVALS Safety standards UL2601-1, CSA C22.2, TUV EN60601-1 C-Tick AS/NZS CISPR11 Group 1, Class A EMC standards EN60601-1-2: 2001,EN61000-3-2, -3, EN61000-4-2, -3, -4, -5, -6, -8, -11 Output Voltage See table Output Current See table Ripple & Noise 2% peak to peak EMI standards EN55011 Class B, FCC Class B, VCCI Class B Line Regulation ±0.5% maximum at full load. MEPS compliance TBC Load Regulation See table MECHANICAL Transient Response Max. deviation 4% recovering to 1% within 500µs after 25% load charge Dimensions 160x76x43.7mm Overvoltage Protection Provided on V1 only. Set at 110%–140% of nominal. Weight 0.78kgs approx. Overcurrent Protection All outputs protected for short circuit conditions Temperature Coefficient All outputs ±0.04% per °C. Holdup Time Typically 15ms at 110VAC. Your dependable power partner – www.powerbox.com.au 367 MEDICAL & MILITARY PMP120 Series 9 6 - 1 2 0 W AT T S S I N G L E O U T P U T A C / D C M E D I C A L - P R E L I M I N A R Y Selection Table MAX. MODEL OUTPUT #1 OUTPUT NUMBER VNOM IMIN IMAX TOL PMP120-12 12V 0A 8.0A 5% POWER 96W PMP120-13 15V 0A 7.0A 5% 105W PMP120-13-1 18V 0A 6.67A 5% 120W PMP120-13-2 19V 0A 6.32A 5% 120W PMP120-13-3 20V 0A 6.0A 5% 120W PMP120-14 24V 0A 5.0A 5% 120W PMP120-16 30V 0A 4.0A 5% 120W PMP120-17 36V 0A 3.34A 5% 120W PMP120-18 48V 0A 2.5A 5% 120W NOTES: Ripple and noise : Peak-to-peak with 20MHz bandwidth and 10μF tantalum capacitor in paralllel with a 0.1uF ceramic capacitor at rated line voltage and load ranges. Pin Chart MODEL/PIN PMP120-12 PMP120-13 PMP120-13-1 PMP120-13-2 PMP120-13-3 PMP120-14 PMP120-16 PMP120-17 PMP120-18 Technical Illustration 368 1 2 3 4 Return Output +V Return Output +V