DC-AC INVERTER UNIT PS-DA0288-01-x (S) (8 W DUAL OUTPUTS) (PRELIMINARY INFORMATION) DESCRIPTION : This low profile DC to AC Inverter is developed for dual lamps. Many different output connector possibilities will make this Backlight Inverter so flexible. APPLICABLE LCD: 5.7 to 12 inches double lamp type Lamp Voltage 600 Vrms Lamp Current 2 x 5 mArms Lamp Start Up Voltage 1.500 Vrms (Vin : 12 Vdc) FEATURES : Remote ON/OFF Dimming with analogue voltage or by resistor dimming RoHS compliant (S) Alarm-signal-function Different models (see order key) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : LxW xH -10°C ~ +60°C -20°C ~ +85°C 95 %RH max 103 x 30 x 9 mm Unit : mm Weight :20 (g) typ. Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN3 Input side CN1: Pin No. Symbols CN 1-1 Vin CN 1-2 CN 1-3 GND CN 1-4 Vrm t CN 1-5 Vbr/Rbr CN 1-6 CN 1-7 Vbr/GND CN 1-8 Vst Qty. 1 1 1 Ratings 10.8 ~ 13.2V 0V Material UL94V-0 (CEM-3) 53261-0890 SM03(4.0)B-BHS-1-TB Output side CN3: Pin No. Symbols Vlow CN 3-1 Vhigh CN 3-2 Vhigh CN 3-3 Note t=1.0m m MOLEX JST or equal Ratings 0 Vdc 600Vrm s 600Vrm s 0~0.4V=OFF / 2.5V~Vin=ON 0~2.5V / 0~50kΩ 0 ~ 50kΩ 0V / 5V (Note 3) Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.0,1 08th July 2009 DC-AC INVERTER UNIT PS-DA0288-01-x (S) (8 W DUAL OUTPUTS) (PRELIMINARY INFORMATION) ELECTRICAL CHARACTERISTICS : Parameters Symbols Output Current (Brightness max.) Output Current (Brightness min.) Input Current Frequency Open Circuit Voltage Shutdown Note 1 : Note 2 : Note 3 : Vin (V) Conditions Vrmt (V) Tu (°C) Min. Specification Typ. Max. Unit Note Iout1/2 12±0.05 5±0.25 -10~+60 4.5 5.0 5.5 m Arm s Iout1/2 12±0.5 2.5 -10~+60 1.9 2.25 2.6 m Arm s V br = 2.5 V dc Iin F Vopen 12±0.5 12±0.5 11.4 m in. 12±0.5 5±0.25 5±0.25 5±0.25 5± -10~+60 -10~+60 -10~+60 -10~+60 37.5 1.300 - 0.73 45.0 1.500 1 1.0 52.5 1700 - A kHz Vrm s Sec. V in 12 V Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. Before apply any control signal into inverter, please provide Vcc first. Please follow the reversed sequence during power off. Power off control signal first, then power off Vcc. This is an output pin and it is active high (+5V) if any Lamp opens / fails. TEST CIRCUIT : PS-DA0288-03-3 F Vin 10.8 ~ 13.2 V Iin A 1000:1 PROBE F Vopen SW 1 Operation of unit a Operation b Non operation V ~ CN1-1 CN1-2 V SW5 CN1-3 CN3-3 CN3-2 CN1-4 Vrmt 0 / 2.5 Vdc T1 a V b SW1 CL2 RL1 CN1-5 a Vbr 0 ~ 2.5 Vdc V b Iout1 SW2 CN1-6 CL2 RL2 A ~ A ~ Iout2 SW6 CN3-1 Rbr 0 ~ 10 kOhm CN1-7 CN1-8 Vst V Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.0,1 08th July 2009 DC-AC INVERTER UNIT PS-DA0288-01-x (S) (8 W DUAL OUTPUTS) (PRELIMINARY INFORMATION) CONNECTOR/PINNING/ORDER KEY : Model DA0288-01-1 DA0288-01-2 DA0288-01-3 DA0288-01-4 DA0288-01-5 Connector 2x SM02(8.0) 2x SM02 B-BHSS 1x SM03(4.0) 1x SM03(4.0) 1x SM04(4.0) Pinning 1=H, 2=N.C, 3=L 1=H, 2=L 1=L, 2+3=H 1+2=H, 3=L 1+2=H, 3=N.C, 4=L Vin 12V 12V 12V 12V 12V Pinning Connector CN2 CN3 CN2+CN3 1;3 CN2+CN3 1;2 1;3 3;4 CN3 1;2;3 CN3 2;3;4 CN3 1;2;3;4 TEST CIRCUIT : PS-DA0288-01-1 F Vin 10.8 ~ 13.2 V Iin A 1000:1 PROBE F Vopen V ~ CN1-1 CN1-2 V CN1-3 SW3 CN2-1 CN1-4 Vrmt 0 / 2.5 Vdc T1 V b SW1 CN1-5 CL1 RL1 CN2-2 NC a CN2-3 A ~ SW4 Iout1 SW5 a Vbr 0 ~ 2.5 Vdc V b CN3-1 SW2 CN3-2 NC CN3-3 Rbr 0 ~ 10 kOhm CL2 RL2 CN1-6 SW6 A ~ Iout2 CN1-7 CN1-8 Vst V Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (3) Version 1.0,1 08th July 2009 DC-AC INVERTER UNIT PS-DA0288-01-x (S) (8 W DUAL OUTPUTS) (PRELIMINARY INFORMATION) PS-DA0288-01-4 F Vin 10.8 ~ 13.2 V Iin A 1000:1 PROBE F Vopen V ~ CN1-1 CN1-2 V SW5 CN1-3 CN3-1 CN3-2 CN1-4 Vrmt 0 / 2.5 Vdc T1 a V b SW1 CL2 RL1 CN1-5 a Vbr 0 ~ 2.5 Vdc V b Iout1 SW2 CN1-6 CL2 RL2 A ~ A ~ Iout2 SW6 CN3-3 Rbr 0 ~ 10 kOhm CN1-7 CN1-8 Vst V Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (4) Version 1.0,1 08th July 2009 DC-AC INVERTER UNIT PS-DA0288-01-x (S) (8 W DUAL OUTPUTS) (PRELIMINARY INFORMATION) PS-DA0288-01-5 F Vin 10.8 ~ 13.2 V Iin A 1000:1 PROBE F Vopen V ~ CN1-1 CN1-2 V SW5 CN1-3 CN3-1 CN3-2 CN1-4 Vrmt 0 / 2.5 Vdc T1 a V b SW1 CL2 RL1 CN1-5 CL2 RL2 CN3-3 NC a Vbr 0 ~ 2.5 Vdc V b Iout1 SW2 A ~ CN1-6 A ~ Iout2 SW6 CN3-4 Rbr 0 ~ 10 kOhm CN1-7 CN1-8 Vst V Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (5) Version 1.0,1 08th July 2009