SSL40C Series S i n g l e O u t p u t E x t e r n a l Pow e r S u p p l y EXTERNAL AC/DC POWER SUPPLIES • • • • • • 40W External AC/DC Power Supplies 1 4.65 x 2.40 x 1.08 inch enclosure 40W continuous external power supply Molded UL94V-0 plastic enclosure Overvoltage and short circuit protection EN55022, FCC conducted and radiated emissions level B UL, CSA, VDE and CE safety approvals The SSL40C series is a 40W universal input AC/DC external Class II power supply in a 4.65 x 2.40 x 1.08 inch plastic enclosure. The SSL40C represents the next generation of low cost external power supplies, suitable for a host of worldwide low power external power applications. The SSL40C provides up to 40W under natural convection cooling. Standard features include universal AC input, overvoltage and short circuit protection and meets EN55022 level B for conducted emissions. The SSL40C has several output voltages available ranging from 12V to 48V. The series has full international safety approvals and carries the CE mark to provide pre-approved SELV outputs. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25°C unless otherwise stated OUTPUT SPECIFICATIONS Total regulation GENERAL SPECIFICATIONS Main output Line, load and temperature coefficient ±5.0% Overshoot/undershoot Less than 10ms Transient response Main output, 70% to 100% full load step ±5.0% of nominal voltage Auto-recovery 140% nominal Overvoltage protection (See Note 5) Short circuit protection 10% Continuous with auto-recovery Minimum output current 0A INPUT SPECIFICATIONS Input voltage range 90 to 264VAC 10ms Efficiency 115VAC @ full load 80% typ. Isolation voltage Input/output 3000VAC Switching frequency Fixed 72kHz, typ. Approvals and standards (See Note 4) Case material EN60950, IEC950, UL1950 CSA C22.2 No. 950 General Electric Lexan, black Flammability rating UL94V-0 Weight MTBF Thermal performance 47Hz to 63Hz 90VAC 264VAC 1.0Arms max. 0.6Arms max. 200g (7oz) MIL-HDBK-217F @ 25°C >150,000 hours EN55022, FCC EN55022, FCC Operating, full load 0°C to +40°C Non-operating –10°C to +85°C 0°C to +40°C ambient, Full load convection cooled Relative humidity EMC CHARACTERISTICS Radiated emissions Conducted emissions 115VAC @ full load ENVIRONMENTAL SPECIFICATIONS Universal input Input frequency range Input current Hold-up time Level B Level B Altitude 5% to 95% RH Operating Non-operating Vibration (See Note 6) 5Hz to 500Hz Shock per MIL-STD-810E 10,000 feet max. 30,000 feet max. 2.4G (approx.) 516.4 Part IV International Safety Standard Approvals geprüfte Sicherhelt VDE0805/EN60950/IEC950 File No. 133084G UL1950 File No. E136005 CSA C22.2 No. 950 File No. LR41062 File Name: SSL40C.PDF Rev: 03 May 2002 SSL40C Series S i n g l e O u t p u t E x t e r n a l Pow e r S u p p l y EXTERNAL AC/DC POWER SUPPLIES 40W External AC/DC Power Supplies 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT CURRENTS TOTAL 3 4 5 6 (MAX) NUMBER 16.8V SSL40C-7612 MAX +12V 0A 3.00A 3.60A 120mV 11.4V to 12.6V +15V 0A 2.66A 3.00A 150mV 14.25V to 15.75V 21V SSL40C-7615 +18V 0A 2.22A 2.60A 180mV 17.1V to 18.9V 25.2V SSL40C-7618 +24V 0A 1.66A 1.90A 240mV 22.8V to 25.2V 33.6V SSL40C-7624 +48V 0A 0.83A 1.00A 300mV 45.6V to 50.4V 64V SSL40C-7617 PEAK (2) (1) REGULATION (3) SINGLE OUTPUT PIN CONNECTIONS 2.5MM JACK PLUG Peak output current lasting less than 3 seconds and non repetitive. During peak loading output voltage may exceed total regulation limits. 20MHz bandwidth, peak to peak, measured using 0.1µF ceramic capacitor in parallel with a 10µF tantalum capacitor at the point of output load. Total regulation is defined as the static output regulation at 25°C, including initial tolerance, line voltage within stated limits, load currents within stated limits, and output voltages adjusted to their factory settings. To maintain user-system safety approvals, the input power cable must be appropriately rated and approved. This feature protects output circuitry from output overvoltage caused by internal PSU failure. Three orthogonal axes random vibration, 10 minute test for each axis. Inner VA Outer Return IEC 320 Two pins SWITCHCRAFT Power Jack, P/N 712A or equiv. INPUT CONNECTOR 4.646 ±0.02 [118.0 ±0.5] C8 type Rated at 2.5A, 250VAC 1.083 +0.024 -0.000 27.5 +0.6 -0.0 Cable Length 36.00 ±0.79 [914.0 ±20] 2.402 ±0.02 [61.0 ±0.5] 2 MODEL MIN RIPPLE Notes 1 OVP OUTPUT VOLTAGE 0.098 [2.50] 2.5 mm Phone Jack All Dimensions in inches [mm] Data Sheet © Artesyn Technologies® 2002 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. www.artesyn.com File Name: SSL40C.PDF Rev: 03 May 2002