FUJI YG906C3R

http://www.fujisemi.com
YG906C3R
FUJI Diode
Low-Loss Fast Recovery Diode
Maximum Rating and Characteristics
Maximum ratings (at Ta=25˚C unless otherwise specified.)
Item
Symbols
Repetitive peak reverse voltage
VRRM
Isolating voltage
Viso
Average output current
-
Operating junction temperature
Storage temperature
IFSM
Ratings
Units
300
V
1500
V
50Hz Square wave duty =1/2
Tc = 109˚C
20*
A
Sine wave, 10ms 1shot
80
A
Terminals-to-case, AC.1min
Io
Non-repetitive forward surge current**
Conditions
Tj
-
150
˚C
Tstg
-
-40 to +150
˚C
Conditions
Maximum
Units
Note* Out put current of center tap full wave connection.
Note**Rating per element
Electrical characteristics
Item
(at Ta=25˚C unless otherwise specified.)
Symbols
Forward voltage***
VF
IF =10 A
1.2
V
Reverse current***
IR
VR =VRRM
200
µA
Reverse recovery time***
Thermal resistance
trr
Rth(j-c)
IF =0.1A, IR =0.2A, Irec =0.05A
Junction to case
0.035
µS
1.5
˚C/W
Note*** Rating per element
Mechanical characteristics
Item
Mounting torque
Approximate mass
1
Conditions
Maximum
Units
Recommended torque
0.3 to 0.5
N•m
-
1.7
g
YG906C3R
FUJI Diode
http://www.fujisemi.com
Outline Drawings [mm]
2
YG906C3R
FUJI Diode
http://www.fujisemi.com
Reverse Characteristic (typ.)
Forward Characteristic (typ.)
100
101
Tj=150°C
Tj=125°C
100
Tj=100°C
(mA)
Reverse Current
Tj=150°C
Tj=125°C
1
Tj=100°C
Tj=25°C
10-1
IR
IF
Forward Current (A)
10
10-2
0.1
Tj=25°C
10-3
0.01
0.0
0
0.2
0.4
0.6
0.8
1.0
1.2
50
100
VR
VF
250
300
Reverse Voltage (V)
Reverse Power Dissipation (max.)
6
14
360°
12
360°
I0
α
(W)
Reverse Power Dissipation
10
Square wave λ=60°
Square wave λ=120°
8
Sine wave λ=180°
Square wave λ=180°
WF
PR
6
DC
VR
5
λ
(W)
200
Forward Voltage (V)
Forward Power Dissipation (max.)
Forward Power Dissipation
150
1.4
4
α=180°
3
2
DC
4
1
2
Per 1element
0
0
0
1
2
3
IO
4
5
6
7
Average Output Current
8
9
0
10
(A)
3
25
50
75
100
125
150
175
200
VR
Reverse Voltage
225
(V)
250
275
300
YG906C3R
FUJI Diode
http://www.fujisemi.com
Current Derating (Io-Tc) (max.)
Junction Capacitance Characteristic (typ.)
100
160
150
140
DC
Junction Capacitance (pF)
(°C)
130
Sine wave λ=180°
110
Square wave λ=180°
100
Square wave λ=60°
90
10
Cj
Square wave λ=120
TC
Case Temperature
120
80
70
60
0
5
10
IO
Average Output Current
15
1
20
1
(A)
λ :Conduction angle of forward current for each rectifier element
Io:Output current of center-tap full wave connection
Surge Capability (max.)
100
IFSM
Peak Half - Wave Current
(A)
1000
10
1
10
10
VR
100
Number of Cycles at 50Hz
4
Reverse Voltage (V)
100
YG906C3R
FUJI Diode
http://www.fujisemi.com
Transient Thermal Impedance (max.)
10
1
Transient Thermal Impedance
(°C/W)
Rth j-c: 1.5 ℃/W
100
10-1
10-2
10-3
10-2
10-1
100
t
Time (s)
5
101
102
YG906C3R
FUJI Diode
http://www.fujisemi.com
WARNING
1. This Catalog contains the product specifications, characteristics, data, materials, and structures as of March 2010.
The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this
Catalog, be sure to obtain the latest specifications.
2. A
ll applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either
express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Systems Co., Ltd.
is (or shall be deemed) granted. Fuji Electric Systems Co., Ltd. makes no representation or
warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which
may arise from the use of the applications described herein.
3. A lthough Fuji Electric Systems Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor
products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take
adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products
become faulty. It is recommended to make your design fail-safe, flame retardant, and free of malfunction.
4. T
he products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has
normal reliability requirements.
• Computers
• OA equipment
• Communications equipment (terminal devices)
• Measurement equipment
• Machine tools
• Audiovisual equipment
• Electrical home appliances
• Personal equipment
• Industrial robots etc.
5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed
below, it is imperative to contact Fuji Electric Systems Co., Ltd. to obtain prior approval. When using these products for
such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's
product incorporated in the equipment becomes faulty.
• Transportation equipment (mounted on cars and ships)
• Trunk communications equipment
• Traffic-signal control equipment
• Gas leakage detectors with an auto-shut-off feature
• Emergency equipment for responding to disasters and anti-burglary devices • Safety devices
• Medical equipment
6. Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic
equipment (without limitation).
• Space equipment
• Aeronautic equipment
• Nuclear control equipment
• Submarine repeater equipment
7. Copyright ©1996-2008 by Fuji Electric Systems Co., Ltd. All rights reserved.
No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Systems Co., Ltd.
8. If you have any question about any portion in this Catalog, ask Fuji Electric Systems Co., Ltd. or its sales agents before
using the product.
Neither Fuji Electric Systems Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in
accordance with instructions set forth herein.
6