RF SAW Filter Part Number Package Application Last Modified 805-RF250.0M-A 5.0 x 5.0 SMD Wireless Communication Mar. 10, 2007 . TYPE : RF SAW Filter for Wireless Communication PART NUMBER : 805-RF250.0M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Condition Minimum Typical Maximum Units - - 250.0 - MHz - - Fo+/-2.5 - MHz Insertion Loss In Passband - 3.0 4.0 Ripple In Passband - 1.5 2.5 Center Frequency (Fo) Pass Band Width Stop Band Attenuation Terminating Impedance DC~Fo-42.8 50 55 - Fo+40~Fo+200 50 55 - - - 150/0 - dB MHz ohms/pF * With Matching Network (Ref. Testing Environment Circuit as shown) . PACKAGE OUTLINE (mm) PIN LAYOUT TEST FIXTURE FREQUENCY RESPONSE A Ground B In C Ground D Ground E Ground F Out G Ground H Ground Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 805-RF250.0M-A