Oscilent Corporation RF SAW Filter | 805-RF325.3M-A Page 1 of 2 RF SAW Filter Part Number Package Application Last Modified 805-RF325.3M-A 5.0 x 5.0 SMD Wireless Mar. 10, 2007 . TYPE : Wireless, RF SAW Filter PART NUMBER : 805-RF325.3M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss Stop Band Attenuation: Condition Minimum Typical Maximum Units - - 325.3 - MHz 322.0 ~ 328.6 MHz - 2.5 3.5 dB Fo-100.0 ~Fo-39.5 MHz 40 50 - Fo+39.5 ~F+100.0 MHz 50 60 - dB 322.0 ~ 328.6 MHz- - 0.8 1.5 MHz Source Impedence (single ended)* - - 150 - ohm Load Impendance (single ended)* - - 150 - ohm DC Voltage - - - 10 V Maximum Input Power - - - 0 dBm Operating Temperature - -10 - +60 ºC Ripple in * With Matching Network (Ref. Testing Environment Circuit as shown) . PACKAGE OUTLINE (mm) PIN LAYOUT TEST FIXTURE A Ground B In C Ground D Ground E Ground F Out G Ground H Ground Oscilent Corporation RF SAW Filter | 805-RF325.3M-A Page 2 of 2 FREQUENCY RESPONSE Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 805-RF325.3M-A