2.0x1.25mm SMD CHIP LED LAMP Part Number: APTK2012RWC/Z-F01 PRELIMINARY SPEC WHITE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. Features z 2.0mmx1.25mm z LOW SMT LED, 0.75mm THICKNESS. POWER CONSUMPTION. z WIDE FOR BACK LIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE : 2000PCS / REEL. z MOISTURE DISCHARGE THRESHOLD (HBM):1000V. COLOR TEMPERATURE:6500K z COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO CIE1931(WHITE). z OPTICAL z COLOR Applications z traffic signaling. z backlighting (illuminated advertising , general lighting). SENSITIVITY LEVEL : LEVEL 4. z ELECTROSTATIC zRoHS grounded. VIEWING ANGLE. z IDEAL z TYP. All devices, equipment and machinery must be electrically z interior and exterior automotive lighting. z substitution of micro incandescent lamps. z reading lamps. z signal and symbol luminaire for orientation. z marker lights (e.g. steps, exit ways, etc). EFFICIENCY:26 lm/W(TYP.) REPRODUCTION INDEX:80 COMPLIANT. z decorative and entertainment lighting. z indoor and outdoor commercial and residential architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH3790 REV NO: V.1 DATE: JUN/08/2007 PAGE: 1 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000745 Selection Guide Note2 Dice Part No. APTK2012RWC/Z-F01 Lens Type WHITE (InGaN) Note3 luminous Intensity Iv(mcd) @ 20mA WATER CLEAR Φv (mlm) @ 20mA Viewing Note1 Angle Min. Typ. Typ. 2θ1/2 380 700 1700 100° Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 120 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C IF 30 mA IFM 100 mA Rth JA Rth JS 350 130 °C/W °C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size≥16 mm 2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Note1 Note1 Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage [Typ.] Reverse Current (VR=5V) [Max.] Unit 0.31 - 0.31 - 2.6 VF Note2 IF=20mA [Max.] Reverse Current (VR=5V) Value 3.2 V 4.0 0.01 IR μA 10 Temperature coefficient of x IF=20mA, -10°C≤ T≤100°C [Typ.] TC x -0.1 10-3 / °C Temperature coefficient of y IF=20mA, -10°C≤ T≤100°C [Typ.] TCy -0.2 10-3 / °C Temperature coefficient of VF IF=20mA, -10°C≤ T≤100°C [Typ.] TCV -2.5 mV/ °C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAH3790 REV NO: V.1 DATE: JUN/08/2007 PAGE: 2 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000745 Brightness codes Note1 luminous Intensity Iv(mcd) @ 20mA Φv (mlm) @ 20mA Code. Min. Max. Typ. R 380 550 1270 S 480 750 1720 T 650 1100 2380 Note2 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White APTK2012RWC/Z-F01 SPEC NO: DSAH3790 REV NO: V.1 DATE: JUN/08/2007 PAGE: 3 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000745 APTK2012RWC/Z-F01 SPEC NO: DSAH3790 REV NO: V.1 DATE: JUN/08/2007 PAGE: 4 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000745 Color Codes APTK2012RWC/Z-F01 White CIE 0.44 0.43 0.42 0.41 0.40 0.39 c1 0.38 0.37 0.36 c0 b4 0.35 0.34 0.33 b3 0.32 0.31 b1 b2 0.30 0.29 a1 0.28 a0 0.27 0.26 0.25 0.24 0.23 0.22 0.21 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 a0 a1 b1 X 0.264 0.283 0.296 0.280 X 0.248 0.275 0.283 0.264 X 0.283 0.330 0.330 0.287 Y 0.267 0.305 0.276 0.248 Y 0.286 0.321 0.305 0.267 Y 0.305 0.360 0.339 0.295 Reference CCT: 14000~9000k Reference CCT: 14000~9000k Reference CCT: 9000~5600k b2 b3 b4 X 0.287 0.330 0.330 0.296 X 0.275 0.298 0.306 0.283 X 0.298 0.321 0.330 0.306 Y 0.295 0.339 0.318 0.276 Y 0.321 0.350 0.332 0.305 Y 0.350 0.379 0.360 0.332 Reference CCT: 9000~5600k Reference CCT: 9000~7000k c0 c1 X 0.330 0.361 0.356 0.330 X 0.321 0.366 0.361 0.330 Y 0.360 0.385 0.351 0.318 Y 0.379 0.419 0.385 0.360 Reference CCT: 5600~4600k Reference CCT: 7600~5600k Reference CCT: 6000~4600k SPEC NO: DSAH3790 REV NO: V.1 DATE: JUN/08/2007 PAGE: 5 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000745 APTK2012RWC/Z-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAH3790 REV NO: V.1 DATE: JUN/08/2007 PAGE: 6 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000745 PACKING & LABEL SPECIFICATIONS APTK2012RWC/Z-F01 SPEC NO: DSAH3790 REV NO: V.1 DATE: JUN/08/2007 PAGE: 7 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000745