Order this document by BDC01D/D SEMICONDUCTOR TECHNICAL DATA NPN Silicon COLLECTOR 2 3 BASE 1 1 EMITTER 2 3 CASE 29–05, STYLE 14 TO–92 (TO–226AE) MAXIMUM RATINGS Rating Symbol BDC01D Unit Collector – Emitter Voltage VCEO 100 Vdc Collector – Base Voltage VCBO 100 Vdc Emitter – Base Voltage VEBO 5.0 Vdc Collector Current — Continuous IC 0.5 Adc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 1.0 8.0 Watts mW/°C Total Device Dissipation @ TC = 25°C Derate above 25°C PD 2.5 20 Watts mW/°C TJ, Tstg – 55 to +150 °C Symbol Max Unit Thermal Resistance, Junction to Ambient RqJA 125 °C/W Thermal Resistance, Junction to Case RqJC 50 °C/W Operating and Storage Junction Temperature Range THERMAL CHARACTERISTICS Characteristic ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Min Max Unit V(BR)CEO 100 — Vdc Collector Cutoff Current (VCB = 100 V, IE = 0) ICBO — 0.1 mAdc Emitter Cutoff Current (IC = 0, VEB = 5.0 V) IEBO — 100 nAdc Characteristic OFF CHARACTERISTICS Collector – Emitter Voltage (IC = 10 mA, IB = 0) Motorola Small–Signal Transistors, FETs and Diodes Device Data Motorola, Inc. 1996 1 BDC01D ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Continued) Characteristic Symbol Min Max 40 25 400 — Unit ON CHARACTERISTICS DC Current Gain (IC = 100 mA, VCE = 1.0 V) (IC = 500 mA, VCE = 2.0 V) hFE — Collector – Emitter Saturation Voltage(1) (IC = 1000 mA, IB = 100 mA) VCE(sat) — 0.7 Vdc Collector – Emitter On Voltage(1) (IC = 1000 mA, VCE = 1.0 V) VBE(on) — 1.2 Vdc fT 50 — MHz Cob — 30 pF DYNAMIC CHARACTERISTICS Current Gain Bandwidth Product (IC = 200 mA, VCE = 5.0 V, f = 20 MHz) Output Capacitance (VCB = 10 V, IE = 0, f = 1.0 MHz) 1. Pulse Test: Pulse Width v 300 ms; Duty Cycle 2.0%. 400 hFE , DC CURRENT GAIN TJ = 125°C VCE = 1.0 V 200 25°C –55°C 100 80 60 40 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) 50 70 100 200 300 500 1.0 1.0 TJ = 25°C 0.6 0.8 IC = 10 mA 50 mA 100 mA 250 mA 500 mA 0.4 0.2 VBE(sat) @ IC/IB = 10 0.6 VBE(on) @ VCE = 1.0 V 0.4 0.2 VCE(sat) @ IC/IB = 10 0 0.05 0.1 0.2 0.5 2.0 5.0 1.0 IB, BASE CURRENT (mA) 10 20 Figure 2. Collector Saturation Region 2 TJ = 25°C 0.8 V, VOLTAGE (VOLTS) VCE , COLLECTOR–EMITTER VOLTAGE (VOLTS) Figure 1. DC Current Gain 50 0 0.5 1.0 2.0 5.0 10 50 100 20 IC, COLLECTOR CURRENT (mA) 200 500 Figure 3. “On” Voltages Motorola Small–Signal Transistors, FETs and Diodes Device Data 80 –0.8 TJ = 25°C 60 –1.2 40 C, CAPACITANCE (pF) θ VB, TEMPERATURE COEFFICIENT (mV/°C) BDC01D –1.6 θVB for VBE –2.0 –2.4 Cibo 20 10 8.0 6.0 –2.8 0.5 1.0 2.0 5.0 20 50 10 100 IC, COLLECTOR CURRENT (mA) 200 Cobo 4.0 0.1 500 0.2 0.5 1.0 2.0 5.0 10 20 VR, REVERSE VOLTAGE (VOLTS) 100 Figure 5. Capacitance 300 200 VCE = 2.0 V TJ = 25°C IC, COLLECTOR CURRENT (mA) f T, CURRENT–GAIN — BANDWIDTH PRODUCT (MHz) Figure 4. Base–Emitter Temperature Coefficient 50 100 70 50 DUTY CYCLE ≤ 10% 2k 1.0 ms 1k 100 µs 500 TA = 25°C 200 100 50 20 30 2.0 3.0 5.0 7.0 10 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) 200 Figure 6. Current–Gain — Bandwidth Product Motorola Small–Signal Transistors, FETs and Diodes Device Data 10 1.0 TC = 25°C 1.0 s dc dc CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT MPSW05 MPSW06 2.0 5.0 10 20 60 80 100 VCE, COLLECTOR–EMITTER VOLTAGE (VOLTS) Figure 7. Active Region — Safe Operating Area 3 BDC01D PACKAGE DIMENSIONS A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSIONS D AND J APPLY BETWEEN L AND K MIMIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. B R SEATING PLANE P L F K X X D G H J V 1 2 3 N C SECTION X–X N CASE 029–05 (TO–226AE) ISSUE AD DIM A B C D F G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.290 0.310 0.125 0.165 0.018 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.018 0.024 0.500 ––– 0.250 ––– 0.080 0.105 ––– 0.100 0.135 ––– 0.135 ––– MILLIMETERS MIN MAX 4.44 5.21 7.37 7.87 3.18 4.19 0.46 0.56 0.41 0.48 1.15 1.39 2.42 2.66 0.46 0.61 12.70 ––– 6.35 ––– 2.04 2.66 ––– 2.54 3.43 ––– 3.43 ––– STYLE 14: PIN 1. EMITTER 2. COLLECTOR 3. BASE Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315 MFAX: [email protected] – TOUCHTONE (602) 244–6609 INTERNET: http://Design–NET.com HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 4 ◊ Motorola Small–Signal Transistors, FETs and Diodes Device Data BDC01D/D